😮 great channel. Just what I was looking for.

@tjaymacRC

2 ай бұрын

Appreciate that, thanks! I also post pictures and comments in my KZread Community Page if you like to check that out. 👍

@simonbellmont

2 ай бұрын

@@tjaymacRC cool

Thank you for showing the setup of your mr04! I am wondering how do you shim the front knuckle top arm to prevent PN rim from rubbing it? Where do you actually put the shim on sir? 1:36sec

@tjaymacRC

Ай бұрын

No shims. I showed that I shaved/sanded down the edge of the upper arm to prevent it from hitting the PN wheels.

@evo165

Ай бұрын

@tjaymacRC thank you sir! You are my mini-z idols! Like your clean fast and consistent driving!

You can try mpower steering seat😊

@tjaymacRC

Ай бұрын

Lost me. Not sure what that is.

Last question to ask you sir, not necessary to use the top shock & spring?

@tjaymacRC

Ай бұрын

All depends on the setup. I suggest to start with PN Tplate #4 without top shock. Just use PN Disc Damper set. I personally don’t like to use top shock on MR04 because its top heavy.

@evo165

Ай бұрын

​@tjaymacRC you are the best! Do u use any silicone grease on the PN disc damper? Pls do advice the oil thickness if any. And which colour spring do u use for bottom and top? Wish to copy exact setup as ur mr04 as my starting base setup. Have a nice blessing day ahead sir.

@tjaymacRC

Ай бұрын

Thanks. I use Kyosho Gear Diff Grease #5000 on top only. For the springs, I'm using NEXX Racing soft springs because its what I have. If I have PN, I would use PN's soft springs. I don't preload the springs too much so that the rear can return to center asap. All depends on the track and driving but on my current MR04, this is my setup.

you can also get a Lexan roof for the 12c.

@tjaymacRC

2 ай бұрын

Thank you! Its finally in stock! Pick a couple up for my 2500KV LiPo car.

Hey TJay know you said top disc green spring just try figure out whether you ment ftom the bottom green spring disc, damper, top disc or ? I know this is a straigh forward question and self explanatory

@tjaymacRC

2 ай бұрын

Oh I’m only running 1 spring (green) and 1 disc, on top only. No spring, no disc in the bottom.

@bazmack4697

2 ай бұрын

Ok will give it a go sorry for being a basic question thanks

@tjaymacRC

2 ай бұрын

@@bazmack4697 Not basic question at all, no worries. Ask anytime. 👍

@bazmack4697

2 ай бұрын

Ok done as you said so it's right if it's a very loose rear end

@tjaymacRC

2 ай бұрын

⁠​⁠@@bazmack4697 Sorry, I’m not sure if you’re telling me or asking me something here. I also don’t remember saying something about loose rearend.

why don't you use Marka tyres? you will become faster, front v5 25, post v1 10

@tjaymacRC

2 ай бұрын

Thank you. I run Marka rears and PN KS fronts on all of my race kit cars. The MR04 I bought it just to drive around the track but still be able to play around with the 2500KV LiPo cars running cheaper tires without traction roll (understeers).