Mozaik Blind dado drawer construction
Тәжірибелік нұсқаулар және стиль
This video will showcase how simple, easy, and fast it is to assemble drawer boxes right off of the CNC using #mozaik 3-4 3/8 blind dado drawer box construction.
This setup cuts a 1/4” blind dado about 3/8” deep into the side stretcher to accept a 1/4” by 3/8” rabbit. Then it cuts a 1/2” dado along the side stretcher to accept the drawer bottom.
I have tested out using pocket hole and screws to join the box together and glue with staples.
In this video I just use glue and staples but for my future drawers I will be using pocket holes and screws so that the sides won’t show any nail holes or staple holes.
#customcabinetry #cnc #mozaik #drawer #drawerslide #drawerassembly #cabinetassembly #cabinet #cabinetmaking
Пікірлер: 19
Great video. Thanks!
@NolanBuilt
6 ай бұрын
Thank you 🙏🏾
Great and easy construction. Thanks for the demo. ❤️
@NolanBuilt
Жыл бұрын
Thank you for watching Ms. Carol!
You made it look easy!
Awesome 👍
Very nice, when you have a process set in place it makes it easy to construct.
@NolanBuilt
Жыл бұрын
Yes it does!
Can you show how you made the design in mozaik?
@NolanBuilt
6 ай бұрын
Working on it now
Nice work! I got the exact same cnc coming in about a month. I would really like to see how you set everything up for yours ( vacuum pump position, size of compressor needed, dust collection etc etc) These phantoms are getting some popularity but there is hardly any content about them bc they are so new. Thanks for taking the time to make some cool videos.
@NolanBuilt
Жыл бұрын
Yea I can definitely put together a video covering those topics. Congratulations on your purchase! Did you get the ATC?
@tradershustle
Жыл бұрын
@@NolanBuilt Yes Sir, we did! It is being delivered tomorrow morning. My Wife and I are using it for our woodworking/design business. We plan on also getting the Mozaik software to use for our cabinet software and then Vcarve Pro for everything else. We also just started on youtube to document our journey. Our channel is called Savvy Farmhouse Design co. Thanks again for the reply and I look forward to more of your content!
@alejandrolazcano1183
Жыл бұрын
@@tradershustleSorry don’t know what’s your plan to use Vcarve. You don’t need Vcarve, for cabinetry, doors and front drawers, with Mozaik you can do everything, including raised panel doors. Good luck and have fun with your new journey
Nice build. Did you cut all the draw parts on the cnc.
@NolanBuilt
Жыл бұрын
Yes all parts were cut on the CNC using mozaik software
Do you edge band the top?
@NolanBuilt
Жыл бұрын
Yes just not in this video. These were shop cabinets
@acerjuglans383
6 ай бұрын
@@NolanBuiltIt would be much easier to edgeband before assembly!