Moxon vise. Тиски Моксона.
(EN):
One of the key applications of hand tools is the creation of carpentry joints. In this case, a reliable fixation of the workpiece with a carpentry vise is a prerequisite.
My choice fell on the Moxon Vice as the most versatile and relatively cheap tool.
For the basis, I used screws with cast-iron flywheels manufactured by Benchcrafted (USA). To Moxon's usual grip, I added a countertop with two rows of holes, attaching it to a fixed jaw. The resulting large work surface, combined with side stops, is ideal for marking and creating swallow tails. For the same purpose, I added two holes in the fixed jaw. The stops inserted into them give a strict perpendicular for fixing the mating part. Between the working surface and the rear wall of the vice there is a recessed stop. It can serve as an emphasis for workpieces during planing, and as a quick access point for the tool currently being used.
He made the working surface and jaws of beech, the side walls and the emphasis of walnut. The product is coated with two layers of Osmo oil.
I believe that Moxon Vise is one of those rare tools that either takes pride of place in the workshop or is at the top of the list of future purchases of the tool. If you agree with this and you do not yet have this vice, then you can use the drawings I have developed.
The project was developed in the SketchUp environment and is available for download.
t.me/ioann_vasilyevich
(RUS):
Одним из ключевых применений ручного инструмента является создание столярных соединений. При этом необходимым условием является надежная фиксация заготовки с помощью столярных тисков.
Мой выбор пал на Тиски Моксона как наиболее универсальный и относительно дешевый инструмент.
Для основы я использовал винты с чугунными маховиками производства Benchcrafted (США). К обычным тискам Моксона я добавил столешницу с двумя рядами отверстий, прикрепив ее к неподвижной челюсти. Получившаяся большая рабочая поверхность в сочетании с боковыми упорами идеально подходит для разметки и создания ласточкиных хвостов. Для этой же цели я добавил два отверстия в неподвижной челюсти. Вставленные в них упоры дают строгий перпендикуляр для фиксации ответной детали. Между рабочей поверхностью и задней стенкой тисков расположен утапливаемый упор. Он может служить как упором для заготовок при строгании, так и местом быстрого доступа для используемого в данный момент инструмента.
Рабочую поверхность и челюсти изготовил из бука, боковые стенки и упор из ореха. Изделие покрыто двумя слоями масла Osmo.
Я считаю, что Тески Моксона - один из тех редких инструментов, который либо занимает почетное место в мастерской, либо стоит в начале списка будущих закупок инструмента. Вы можете воспользоваться разработанными мною чертежами.
Проект разработан в среде SketchUp и доступен для скачивания.
t.me/ioann_vasilyevich
Пікірлер: 264
Exceptional craftmanship and attention to detail impressive I learned a lot thanks so much
Now this is something. And the one I'll build for myself. Thanks for posting
@ivan_petroff
4 ай бұрын
Thank you! Enjoy!
What I have loved watching KZread is most of the people creating these works of art use them. That really gets me going. Nice job. What a work of art!
@ivan_petroff
Жыл бұрын
Thank you, I was finally able to thank you for your comments. And I'm glad to invite you to watch a new video.
Wow! Very nice. Great design features for a small table. Thank you for sharing.
I have barely seen a video where every single tool is of such high end quality. And the resulting piece, represents just that.
@ivan_petroff
3 жыл бұрын
These are all cinematic stunts and intrusive advertising. ;)
Fantastic work sir, this is exactly what I was looking for thank you for sharing your plans.
@ivan_petroff
4 жыл бұрын
Michael Gerson Look at my instagram, there are a lot of interesting moments of the work process not included in the video. @ioann_vasilyevich.
Phenomenal! It's very generous of you to provide the plans. Thank you.
@ivan_petroff
3 жыл бұрын
GuitarFuYou Thank you for your opinion. Happy to help.
Nice choice of music..very reflective. And nice shavings! Beautiful vise!
@ivan_petroff
3 жыл бұрын
Thank you friend!
Having beautiful tools is one thing. Having the mastery to create something that gorgeous with them is a whole other thing. Well done, awesome work. Excellent editing and camera work as well. Thank you.
@ivan_petroff
2 жыл бұрын
Thank you friend for the great review.
Your vise is the most beautiful Moxon vise. Well done! Thank you for sharing!
@ivan_petroff
2 жыл бұрын
Thank you friend! I'm glad you liked it.
Это не тиски Моксона, это произведение искусства. Как это я прозевал подписаться на Вас. Неделю назад начал делать себе, теперь опустились руки. Спасибо за удовольствие.
@ivan_petroff
Жыл бұрын
Спасибо! Чертежи на эти тиски есть в журнале Мастер и Мастерская.
@SusanaOverdycova
4 ай бұрын
Добавлю, что это 10 номер (3 за год) 2020 года журнала Мастер и Мастерская.
It's fantastic watching you, beautiful masterpiece. You are the best. Thank you
@ivan_petroff
3 жыл бұрын
Thank you for your appreciation.
Beautifully made. What a craftmanship !!
@ivan_petroff
3 жыл бұрын
Thank you!
That is one of the nicest ones I’ve seen so far. Beautiful.
@ivan_petroff
3 жыл бұрын
Thank you friend!
It’s work of art at a whole new level done with passion to attain such perfection. Not just your work, but the camera angles were also great! Thanks for sharing.
@ivan_petroff
3 жыл бұрын
Thank you friend. We will continue
You’re not just a master craftsman but an artist.
@ivan_petroff
3 жыл бұрын
I am just learning
Absolutely amazing! excellent work! thanks for taking the time film and film it Great you did!
@ivan_petroff
3 жыл бұрын
Thank you friend!
This is a beautiful work, it inspires me to keep on woodorking. Cheers from Argentina.
@ivan_petroff
3 жыл бұрын
Several weeks without joinery. Hands itch.
Beautifully done! I'm building a workbench with Benchcrafted gear at the moment and the Moxon Vice might be one of the following projects. I really enjoyed this video and you surely have an eye for a detail. Outstanding!
@ivan_petroff
3 жыл бұрын
Thank you friend! It will be interesting to see what you did.
Как в игрушечном магазине побывали. Столько цацек-пецек и няшек, что аж слюнки. Такой офигенский комплект ручника мало где увидишь. И всё это сдобрено таким саундтреком - рай для перфекциониста.
@ivan_petroff
5 ай бұрын
Чем старше мальчик, тем дороже игрушки.
Отлично получилось! Удобно и функционально, можно вместо верстака дома использовать для небольших проектов.
@ivan_petroff
4 жыл бұрын
Спасибо! А ведь Вы правы, в багажник залезет... идея!
Great build - watching this video it was hard to not notice your collection of hand tools, I am so jealous!
@ivan_petroff
3 жыл бұрын
Thank you. Once you start and you won't be able to stop.
@MrCFB80
2 жыл бұрын
@@ivan_petroff I just watched this again - am inspired to build one one day!
really impressive work, thanks for showing it
@ivan_petroff
3 жыл бұрын
Thanks! Happy to help friend!
Fantástico trabajo. Meticuloso 100%. Resultado increíble Enhorabuena
@ivan_petroff
Жыл бұрын
muchas gracias amigo
I find myself watching this video over and over. Great job on the vise. I just picked up all the HW and will be starting mine this weekend. You sure are a fan of Veritas tools. That's a nice collection.
@ivan_petroff
3 жыл бұрын
Thank you friend! Veritas is one of my favorite manufacturers.
Настоящий Художник своего дела!!! Просто отличная работа!!!
@ivan_petroff
3 жыл бұрын
Спасибо, Семён!
Excellent, is the best moxon I've seen, congrats.
@ivan_petroff
2 жыл бұрын
Thank you, friend!
Wow what a beautiful vice and unbelievable craftsmanship! Oh and not to mention the dream tool collection you got there. So glad I found your channel.
@ivan_petroff
Жыл бұрын
Thank you, I was finally able to thank you for your comments. And I'm glad to invite you to watch a new video.
Получил истинное наслаждение!Шикарно!!! Подписался! Будем ждать еще...
@ivan_petroff
4 жыл бұрын
Вадим Гу Спасибо! Скоро будет, монтирую.
Joy to watch you working. This would probably take me a year to build. Well done.
@ivan_petroff
3 жыл бұрын
Thank you, I only did this on weekends with breaks. I spent a couple of months.
@eirerocks
3 жыл бұрын
@@ivan_petroff good to know. I have downloaded the plans so who knows, maybe some day I will be brave and give it a shot. Thanks for inspiration
@ivan_petroff
3 жыл бұрын
@@eirerocks Thanks! Happy to help friend!
Excelente trabajo! Saludos desde MÉXICO!🇲🇽🇲🇽🇲🇽
@ivan_petroff
3 жыл бұрын
¡Gracias amigo!
Fantastic design and execution!
@ivan_petroff
2 жыл бұрын
Thank you friend!
Wow. That was satisfying to watch. Nice build and great video. Good tools and skills. And that logo in the end. ❤
@ivan_petroff
Жыл бұрын
Thanks buddy, I finally answered your comment and posted a new video. Enjoy your viewing.
Ok, SO! First video I've seen from you. You show every step of the process to show the effort it takes to make such a piece, yet it moves along to not make the video tedious to watch. Just when I thought it was over you made and inlaid the logo. Then you showed the vice in use. The music in the background was a nice touch and still can hear the cutting. New subscriber. Well done! Can't wait to see more. Greetings from Florida.
@ivan_petroff
Жыл бұрын
Thank you, friend. I am glad to announce that I have released a new video. Enjoy your viewing.
Well done, sir. I enjoyed that very much. Thank for you sharing.
@ivan_petroff
3 жыл бұрын
Thank you friend. I am glad to help.
Смотрю ролик раз 10. Ну как показана классика столярки ! Очень вдохновляет . Мастер.
@ivan_petroff
2 жыл бұрын
Спасибо, Сергей!
That is too beautiful to be a shop tool. Wonderful.
@ivan_petroff
3 жыл бұрын
Thank you, friend!
The ogee shape at the foot was a VERY nice touch!! Extremely well built Sir 😁
@ivan_petroff
2 жыл бұрын
Thank you very much friend!
I’m getting ready to build one of these myself using a LieNielsen twin screw chain set, going to run one side longer as an open end extension. I really like what you did with the insert (I hadn’t considered that one). Nicely done.
@ivan_petroff
Жыл бұрын
Thank you friend. I like Lee Nielsen's solution. I would like to see your result. Good luck.
Wow. You are an artist.
@ivan_petroff
3 жыл бұрын
Thanks, but I'm not good at drawing.
Завараживает . Мастер и мастерство . Снимаю шляпу!
@ivan_petroff
3 жыл бұрын
Спасибо, Сергей!
Just found this !! Getting ready to build one looking for ideas . This is awesome very well done . Hope you don’t mind I take a few ideas from this.
@ivan_petroff
2 жыл бұрын
I am very glad I was able to help you. It will be interesting to see your work.
Captivating " from start to finish. .. I couldn't turn away, bravo 👏 1 of the most beautiful things I have ever seen. Big fan.. also one of the sick'es joint I have ever seen.. 🤓
@ivan_petroff
Жыл бұрын
Thank you, I am finally able to thank you for your comments. And I'm glad to invite you to watch a new video.
@frankthetank8749
Жыл бұрын
I'm definitely a big fan very 😎
Мне нужна помощь. После просмотра, потерял дар речи!!! Шикарная работа и не менее шикарный инструментарий!
@ivan_petroff
3 жыл бұрын
Спасибо друг!
Speechless. Standing ovation.
@ivan_petroff
3 жыл бұрын
Thank you!
perfect. I like it. wunderful features included.
@ivan_petroff
3 жыл бұрын
Thanks! Happy to help friend!
Best Moxon vise yet!
@ivan_petroff
3 жыл бұрын
thanks
Вы достигли определенного успеха в этом деле 👍
@ivan_petroff
2 жыл бұрын
Спасибо!
Отличная работа!
@ivan_petroff
3 жыл бұрын
Спасибо
Экстаз для глаз! Миллион подписчиков
@ivan_petroff
Жыл бұрын
Спасибо! Смотрите новое видео!
За сами тиски, их новое прочтение и реализацию идеи- нравлик (1 штука, однозначно)! Но...За качество инструмента, уровень работы и, в особенности, за музыкальное наполнение ролика- подписка на канал! Дружище, не опускай руки! Как не хватает на ютюбе контента подобного уровня! Всего наилучшего!!!
@ivan_petroff
Жыл бұрын
Спасибо! Снимаю новый масштабный проект выполнен исключительно ручным инструментом. Вам понравится...
Fantastic job 👍🏻
@ivan_petroff
4 ай бұрын
Спасибо!
Very beautiful. Thank's for this vidéo.
@ivan_petroff
2 жыл бұрын
Thank you, friend!
Artist work!! Amazing!
@ivan_petroff
Жыл бұрын
Thank you, I am finally able to thank you for your comments. And I'm glad to invite you to watch a new video.
Just... well, awesome. Thanks for sharing.
@ivan_petroff
2 жыл бұрын
Thank you friend. Good luck to you.
Мастер-перфекционист плюс мастер-оператор! Настоящий талант талантлив во всём!
@ivan_petroff
3 жыл бұрын
Спасибо, друг!
Круто👏👏👏 Это какой-то идеальный столяр.
@ivan_petroff
Жыл бұрын
Спасибо! Посмотрите новое видео
That was awesome to watch. Geez, you sure like Veritas tools.
@ivan_petroff
3 жыл бұрын
Veritas is the best commercially available instrument. And for its quality, it is not so expensive, given the time of its operation.
Very nice . I had to like and subscribe.
Очень хорошие оборудование и главное руки знают как его применить)))
@ivan_petroff
3 жыл бұрын
Спасибо!
taking my hat off well done!
@ivan_petroff
3 жыл бұрын
Thank you, friend!
This is out of this world
@ivan_petroff
2 жыл бұрын
Thank you, friend!
Woaw! Quel beau travail.Ton assemblage à "double-queues-d'arronde" est magnifique,je ne connaissais pas.Bravo chef
@ivan_petroff
3 жыл бұрын
Merci, mon ami! J'apprends juste, principalement sur KZread.
@sebroots6637
3 жыл бұрын
@@ivan_petroff Sérieux?Tu as plutot l'air d'un professeur que d'un apprentit ; ) Tu travailles super bien,je suis sur le point de me faire un établi et par manque de place,je pense me diriger sur un mini-work-bench;ton travail va donc m'aider,merci ; ) (ps:ton logo incrusté est très stylé lui-aussi) Je m'abonne BYE ; )
@ivan_petroff
3 жыл бұрын
@@sebroots6637 Remercier! Avant de commencer les travaux, envoyez-moi votre email, je vous aiderai avec les plans.
Смотрю ролик десятый раз!
@ivan_petroff
2 жыл бұрын
Меня раза на три только хватило ;)
A+. Thank you for sharing
@ivan_petroff
2 жыл бұрын
Thank you, friend!
Nicely done, just one thing about holding the router from its base! If a kickback happens your fingers can go directly to the spinning bit. Thx for sharing your work.
@ivan_petroff
3 жыл бұрын
Thank you friend! I'm just learning, thanks for your recommendations, I'm trying to be careful.
@TheWoodCrafter1
3 жыл бұрын
@@ivan_petroff Good luck mate 👍
В на середине видео подумал: сплошная эстетика. Так держать!
@ivan_petroff
3 жыл бұрын
Спасибо, друг!
@delomastera84
3 жыл бұрын
А я,на середине видео подумал,что перфекционизма бывает слишком)))Работа прекрасная,восхитительная.Но это всего лишь тиски.Хотя однозначно лайк.
@delomastera84
3 жыл бұрын
И подписка.
@ivan_petroff
3 жыл бұрын
@@delomastera84 Спасибо друг, буду продолжать.
Подписался, может ещё что-то будет. Спасибо за отличный труд!
@ivan_petroff
3 жыл бұрын
Сей час работаю над одним проектом. Обязательно покажу.
What a nice emblem
@ivan_petroff
3 жыл бұрын
For several days I thought about how to make it.
Belle réalisation, merci pour ce partage ! Petite remarque quand même, il faudrait mettre une grosse rondelle sous vos 2 écrous à 13:49 sinon vous risquez un matage du bois au fil de l'utilisation de votre étau. Прекрасное достижение, спасибо, что поделились! В любом случае, небольшое примечание, вы должны положить большую шайбу под ваши 2 гайки в 13:49, иначе вы рискуете запачкать дерево из-за использования ваших тисков.
@ivan_petroff
3 жыл бұрын
Hi Daniel! I do not quite understand what you mean. This is a complete set of flywheels, there were no additional washers.
Magnificent!
@ivan_petroff
Жыл бұрын
Thank you, I am finally able to thank you for your comments. And I'm glad to invite you to watch a new video.
Видел много подобных верстаков. Как правило, ставят стандартные тиски на короткую сторону. Тиски Моксона - достаточно необычно, и выглядит очень логично, когда верстак стоит на другом столе. Продолжайте пожалуйста, вам есть что показать!
@ivan_petroff
2 жыл бұрын
Спасибо друг! Непременно...
Большое спасибо, нашел!
@ivan_petroff
4 ай бұрын
На здоровье!
Блестяще!!!
@ivan_petroff
4 жыл бұрын
TIMΞCATCHΞR Спасибо!
БОМБА !
@ivan_petroff
3 жыл бұрын
Спасибо
Nice Moxon build, just get a gripper for ripping on the table saw 👍
@ivan_petroff
3 жыл бұрын
Thanks. I will improve ...
outstanding
@ivan_petroff
3 жыл бұрын
Thanks!
Нельзя так издеваться над простыми смертными ...) Эстетика зашкаливает.
@ivan_petroff
3 жыл бұрын
Спасибо, Алексей! Буду продолжать издевательства более изощренными методами, дабы избежать негативного восприятия и общественного порицания ;)
That is amazing!! Thank you for sharing. I was disappointed that hounds tooth dovetail didn't pop more but it looks fantastic! Are you going to make another one with a tail vise? I guess you would have to flip the dovetail but it would be over the top amazing...
@ivan_petroff
2 жыл бұрын
Thanks. Yes, I want to work on the swallow's tail. There is no time for hobbies at all.
Очень узнаваемые тиски получились! Лазил тут по Авито в поисках инструмента, в одном из объявлений увидел фотку рубанков на фоне этих тисков с логотипом-кубиком ) Думаю, где же я это мог видеть? А потом вспомнил, что здесь, на youtube ) На одно лишь надеюсь: что вы не свой личный инструмент распродаёте, потому что завязывать со столяркой, имея такие навыки - преступно! :)
@ivan_petroff
Жыл бұрын
Спасибо! Не переживайте. Оснащение мастерской поменялось. Но инструмента стало только больше.
Wow! I can only say that😍
@ivan_petroff
3 жыл бұрын
Thank you!
Nice vice and I love the veritas tools. Veritas is my plane of choice and plan on getting the jointer . Not sure bevel up or down? How do you like your jointer plane? And the chisels?
@ivan_petroff
3 жыл бұрын
This is an excellent tool. Whatever you choose from Veritas, you will be satisfied.
На это можно смотреть вечно!
@ivan_petroff
3 жыл бұрын
А как приятно это делать...
В чем по вашему мнени преимущество у Veritas custom перед low angle plane? Я вижу у вас в работе оба типа рубанков. И ещё просьба почаще снимайте что нибудь. Очень нравится ваша работа.
@ivan_petroff
2 жыл бұрын
По мне так Custom предпочтительнее. Сначала купил с низким углом, насмотревшись западных партнёров. А позже приобрёл кастомную версию и теперь только ей и пользуюсь. А с низким углом только по торцам или если под руку попадётся. Люблю экзотику в стружку переводить, на подстилку курам. 😁
Отличные тиски и красивый монтаж! И почему так мало просмотров?((( Есть вопрос - я собираюсь делать себе верстак, и из-за скромного помещения длина его получается около 1100. Стоит ли вместо обычных тисков просто сделать тиски Моксона на всю длину? Смогут ли они заменить обычные верстачные тиски, а может быть даже превосходят их?
@ivan_petroff
4 жыл бұрын
TosnoWood Спасибо! У тисков Моксона есть свои преимущества, но все же это не полноценная замена верстаку. Но при ваших исходных размерах, возможно стоит попробовать именно с Моксона, или компактного верстака. Например: www.fine-tools.com/mobile-hobelbank.html
Hi Ioann, beautiful job. What is the hole in the fixed jaw at the right hand side close to and under the screw location, for? Thank you..
@ivan_petroff
3 жыл бұрын
Hi David! To mark out and create the dovetails, I added two holes in the front. The stops inserted into them, in combination with the holes on the horizontal surface, give a strict perpendicular for fixing the counterpart.
Phenomenal build of your Moxon vice. I thoroughly enjoyed it. The accompanying music was a bonus. Who was the player/composer?
@ivan_petroff
3 жыл бұрын
Thanks for your feedback! This music is in the standard selection of music on the KZread editor. Drone in D by Kevin MacLeod
What is the ideal eventual height for a bench top work bench such as the really good one you have made. Is it 25mm lower than your elbow or hip height or what ??? Thank you for posting this video. I think it is the best example I have seen on You Tube of such a mini bench.
@ivan_petroff
Жыл бұрын
In order to make it as convenient as possible for you, I have attached a link to the drawings in the description of the video.
hello ioann, what are the slots in the back insert for? tool storage like in a roubo bench?
@ivan_petroff
3 жыл бұрын
Yes, this is the quick access point for the tool you are currently using. This stop is also used for planing.
What are the tape-like strips you wraped around your fingers
@ivan_petroff
Жыл бұрын
This is a Band-Aid from Veritas.Only for carpenters using hand tools. Let ordinary mortals buy bodily at the pharmacy.
Очень красивая работа! И музыка хорошо подобрана! Можно небольшой вопрос of the top? Каким фуговальным и рейсмусовым станком Вы пользуетесь? Да и, вообще, если бы Вы сняли ролик о своей мастерской, было бы здорово! Большое спасибо! Здоровья и удачи!
@ivan_petroff
3 жыл бұрын
Фуговального нет, слишком маленькая мастерская - 3х6м. Фугую вручную, в видео есть этот процесс. Рейсмус DeWalt 735.
Great build , you got a sub. Question - why did you hand plane it before putting it in the thicknesser?
@ivan_petroff
Жыл бұрын
At that time, I did not have a stationary jointer. Therefore, I leveled the base surface with hand planers, and then leveled the opposite side with a planer.
Wow👏🏻👏🏻👏🏻👏🏻👏🏻👌🏻
@ivan_petroff
3 жыл бұрын
Спасибо
nice
@ivan_petroff
3 жыл бұрын
Thank you!
Wow!
@ivan_petroff
2 жыл бұрын
Thank you, friend
Это полноценный верстак!
@ivan_petroff
3 жыл бұрын
да, но при этом в багажник залазит
Это же полноценный настольный верстак совмещённый с тисками Моксона! Впервые встречаю такую интересную конструкцию. Великолепная работа, Иван! Почему так редко снимаешь ролики? Ютуб не вдохновляет?
@ivan_petroff
3 жыл бұрын
Привет, Олег! Достойного материала для видео нет. Чего-то по тихому строгаю, но это не особо интересно. Но мысли правильные есть....
@VORONM
3 жыл бұрын
Мне кажется, с таким качеством подачи материала, любое изделие будет интересно зрителям. Мне, как новичку в столярке, любое телодвижение мастера интересно и полезно. А таких как я довольно много. Я был бы очень рад видеть ролики на твоём канале, как можно чаще. У меня возникло смутное ощущение, что вижу знакомую столярную школу. Ты, часом, не у Рубанков обучался?
@ivan_petroff
3 жыл бұрын
@@VORONM учился в ютубе и на мастеровом.
@VORONM
3 жыл бұрын
А сколько времени уже столяркой занимаешься? Я, третий год пытаюсь освоить, но, пока, результат не утешительный :-(
@ivan_petroff
3 жыл бұрын
@@VORONM С 2014 года. Только по выходным и далеко не каждую неделю.
WAAAOOOW !
Красивое🙄
@ivan_petroff
4 ай бұрын
Спасибо друг!
Здравствуйте, подскажите пожалуйста модель сверлильного станка. Спасибо за видео, повторю 👍
@ivan_petroff
3 жыл бұрын
Станок сверлильный BOSCH PBD 40 (0.603.B07.000). 🤝
@user-uh4yv8ok5b
3 жыл бұрын
@@ivan_petroff спасибо