Loved the video! Thanks for putting in the time to make it!

Great content. I've had that screen protector for my note20 ultra, and it would always lift when using supcase unicorn beetle pro and poetic spartan and otterbox defender pro.

The adhesive glue went in the s-pen slot how long will it take for me to get it out like whats the adhesive expiry ? Would appreciate the help 🙏🏼

Applied it 7 months ago, cured for 60 minutes (yes 60 minutes) and not a single piece has gotten loose... it's still ON there, no spiderwebbing or whatever. Of course some light scratches from using the phone but yeah it's on the protector so it's doing its job... awesome for the price!!

@HighTechCheck

6 ай бұрын

Thank you for sharing your experience after some time of use, this is very helpful information for everyone.

Thank you! Very good directions!

Mowei one of cleanest screen protectors. It looks like it doesnt exists on phone. No leaks in charging ports or microphone because they provide tapes to cover it amd looks perfectly protected. Only problem wat can be with this product is some cases won't be compatible with scr. protector they too close each others and posibility for poping up screen. Im using Ringke Fusion case and i had to trimm little bit corners on case and now work flawlessly

NOTE: My instructions say 45 seconds cure with the weight and then 5 MINUTES without weight before removing it from the case. Then 45 minutes per second. It also suggested that you should stir the glue circles to remove any little bubbles. I didn't see any so i skipped it, but as I had bubbles on the last time I tried it may be a good idea. I like this companies product but they send you only TWO glue tubes and 4 screens. I had to get an entire new kit because my first one only had 1 glue tube left after I accidentally touched the phone and all the glue fell off before the screen went on. The second glue worked but then less than a year later it broke and both the protector and the screen broke even though it was in a heavy duty case. Because I had no remaining glue I had to purchase a new kit and that one only had one glue tube, the other was bone dry. Because I had bubbles I emailed the company per their instructions and they sent me out a completely new kit. I just put the first one on and so far successful. I wish there was a way to just get the glue because at this point I have so many screen protectors but only one glue. It seems silly that I have 3 curing lights, 3 cases and 3 metal bases when all I really needed was one tiny glue stick! I did have to redo my fingerprints but not a big deal. I really like the companies products, it just takes a bit of practice to get it right. YOur video and the one supplied on the Amazon listing were instrumental in my sucess, so Thank YOU!

I've bought the privacy one of this, yet to install it, hopefully works fine and my case still fits properly (I've got the Ringke Onyx case)

@HighTechCheck

Жыл бұрын

One of my goto cases 😊

@Luccplay

Жыл бұрын

And ?

@Vladyugi

Жыл бұрын

Hello, did the screen protector worked well with the case or did it peel off?

Great job explaining the install process! Mine installed perfectly 1st try, although a little low but that's my fault -_-

Great video thanks for sharing

Thank you for review and instraction. Very helpful.

thank you so much for this guide

GREAT screen protector did it perfectly on my first try thanks to your informative video keep up the great work 👍👌

this looks fine but other uv screen protector videoes suggest u tape off the top speaker u ant showing that are u sure glue wont get into the top speaker?

@tonyc6802

Жыл бұрын

Not either volume and on/off buttons

I have installed Tempered Glass Screen Protector and i have Spigen MagSafe transparent case. Screen protector started peeling of in the bottom left corner. Don't know if that is from Case or i didn't installed it correctly. I had it under UV light 8 minutes. Anyone else having same case with this protector?

Is the mowei clear tempered glass the same as the gatatol clear tempered glass ? Got 2 packs of moweis but got bubbles on all of them lol.... Should i try the gatatol one ?

@teste-yh5df

Жыл бұрын

it is your environment, its nothing to do with the brand u can try any brand if your house have floating dust.. well u know

@princesspp6802

Жыл бұрын

@@teste-yh5df well if air bubbles are dust, sure :p

You put up tape on the bottom of the screen to protect against the glue, but what about the speaker cut out on the top? There is no way to protect that part unless you're relying on the foam.

I'm still using my Samsung Galaxy 9. When I do decide to update to another Samsung galaxy. I'll buy the protector from your link. I'll add that my Samsung 9 has liquid glass protector along with a case for it. Over the years I dropped it many times not one break not one scratch well worth the extra money guys

I got the IMBZBK kit, which is very similar. Both made in China. I'd go so far as to think some of the pieces may be made in the same factory. My installation went fine, 100%. There are some differences though: 1) They did not include the sticker for the bottom ports. I think this is the main deficiency, compared to your kit. I used some cellophane tape, but your kit's ready-made stickers would have been better. 2) The glue bottles were a little different (no extra tab to break), but it worked fine. 3) The IMBZBK kit does not instruct to make two bubbles. I would instruct people NOT to be obsessive about getting every little drip out of the bottle. I see you got a lot of excess around the edges, and some people using the IMBZBK did did as well. There is no reason to manipulate the bubbles, the weight of the protector will even it out. 4) Also be very careful when putting the little weight down, I think this may be causing more glue to leak out that necessary. Put it down **veeeeeeeery** gently. In your video, you kinda plopped it down. Frankly, if I see the liquid getting coverage everywhere, I might just skip this step? Not sure. 5) The IMBZBK does note have a cut-out for the front-facing camera. I don't know if this is good or bad. It's functioning fine, as far as I can tell. 6) DO not remove the phone from the holder until you've cured it several times with the light. I have no idea why you removed it after only one cure and continued... you're causing even more liquid to seep out. You can keep the phone in the plastic caddy thing as long as you need to, I let the light cover the entire phone several times before removing. Yeah, man... as I watch, it seems like you have SO much excessive glue. It got worse when you nudged the screen... I'd try to get as even a surface as possible, and remove the wedge thing as slowly as possible, so as not to require that much movement during application.

@mercster

Жыл бұрын

One other difference that might matter: the IMBZBK's plastic caddy/holder thing has an integrated bubble level, which allows you to make sure you're doing the application on the most level purpose possible. If I had to guess, a) uneven surface and b) being too fast/careless with weight is what's causing all these leaks. I'd be freaking out! BTW I am not affiliated with either company, I think both kits can get the same job done, I'm just trying to give hints for people going forward.

@filler2036

11 ай бұрын

The IMBZBK protector is not quite available around here, do you think this is pretty much the same good?

@mercster

11 ай бұрын

@@filler2036 I have no idea since I've only used one... :-) But they seem very very similar, I'm sure it's fine.

Does it cover any scratches from the phone screen? I have a few and I want to hide it. I currently have a thinner one and it doesnt feel like it has a lot of protection.

@Constantin198413

3 ай бұрын

it will .. I have some minor scratches on mine and the glue makes it looks brand new . I had 4 of these screens so far on my samsung s22 ultra and never going back to any other screen protector .

Nice video. But I don't trust glass with camera cutout as it tends to collect dust and also glass with black strip on edges as it covers some of the edge screen.

I heard that it will be hard to remove the screen protector in the future. Is this true? I would like to use this protector on my new S23U but actually scared due to several cases saying so.

@joshn-im7nv

Жыл бұрын

cut a retangler peice off of a plastic cup and carefully pry it up with that. thats works the best

@jaysanyeep

Жыл бұрын

not true, get a hard plastic to lift it up along the edges and it pops up easily

Excellent tutorial. I used slightly less glue but I feel it was the perfect amount as I had zero mess. Guess I got lucky lol

Do these come off easily with no damage to phone screen? Does it work well with cases. I bought one but am nervous to install.

@HighTechCheck

Жыл бұрын

I’ve never had my phone get damaged when taking the screen protectors off and it depends on what case you’re using the only way to really know is to try it with the case you want to use. It’s not really that hard to install. If you follow my video you should be fine. I didn’t have any issues installing mine.

How remowe this glass?

Interesting install concept. Seems more of a hassle than anything. And the scratch test results are not great for protection. Cool video though.

@teste-yh5df

Жыл бұрын

I have used uv glass protectors, its same as glass protector, the uv is only so the edges glue properly

How's the camera quality since it's covering it?

@teste-yh5df

Жыл бұрын

You can expect some light blurry sometimes but just cleaning it its ok

You've not covered the ear speaker and the volume + on/off buttons. We don't need to?

@teste-yh5df

Жыл бұрын

if not overflows then its not needed

Can you please test the ESR s23 ultra tempered glass.

@HighTechCheck

Жыл бұрын

Hmmm I see a clear circle on the screenshot of that protector which leads me to believe it’s just like the few I tested in my best and worst video. I’d stay away from it but I’ll see if I can get one for testing 👍🏼

@Xaris_Papado

Жыл бұрын

@HighTechCheck thank you I will be grateful, I got this bundle with the camera lens protector dual pack.

I've always wanted to install one of these but I have installed more than enough screen protectors to know how difficult it can be to not get dust between the screen and the protector no matter how careful you are, and given how long and involved the process of installing one of these can be, there's no way I can rest assured I am not gonna get at least one spec of dust underneath it and I just cannot handle it. I really can't live with having the smallest spec of dust under the protector.

@ayra7136

Жыл бұрын

I feel you brother, i really feel you... it's kinda impossible... some peoples suggest to do it in the bathroom after turning on hot shower for a while, since warmest place tend to make dust less floaty but i dont know

@teste-yh5df

Жыл бұрын

the tip of installing in bathroom is the best, I also installed mine on s8 edge and got it perfectly, most houses have dust in the environment so you have to go to cleaniest place..

@teste-yh5df

Жыл бұрын

@@ayra7136 that really works bro

@DavidWilson-fr1et

Жыл бұрын

@@teste-yh5df You know what worked flawlessly for me time and time again ? Not the bathroom tip. Opening windows in the house in a way that there's an airflow. I know it sounds not very logical but I have found that stagnant air made the dust bits always fall on my screen which makes perfect sense, as the screens are static, but the chances of dust falling on my screen have always been SEVERELY mitigated by opening windows. Seriously. Try it.

@teste-yh5df

Жыл бұрын

@@DavidWilson-fr1et ty

Better than Dome?

Not good with cases, just mess up the corners

No need for liquid adhesive on a flat display. Your risking messing up the speakers, buttons, etc.. not fo me

@helterskelzer3883

Ай бұрын

It's not flat

3:17 this glass is not clear..why not?

@HighTechCheck

10 ай бұрын

It is clear but it’s privacy glass.

Hello,i ruined my earpiece speaker because of this brand's glue it goes everywhere in every corber of the phone and is hard to remove.

@mihailaurentiu5050

Жыл бұрын

Salut,vroiam sa comand si eu acest screen protector!Sa inteleg ca nu este bun,asa este?Multumesc,imi pare rau pentru ce ai patit

@teste-yh5df

Жыл бұрын

Why you didnt cover or wipe before it getting messy

@purityce3487

8 ай бұрын

You didn't set the sponge over the speaker like he did so it didn't get to absorb the liquid so it poured into the speaker

Too risky. Those adhesives might flow inside the charging port.

@Garrett1974

Жыл бұрын

there are stickers provided so you can avoid that, even without stickers you could just buy some painter's tape and protect it with that.

@ljays1029

Жыл бұрын

Yeah why he didn't include showing using the stickers. He did it show on older versions

@decathec

Жыл бұрын

​@LJays 1:17 he literally puts the sticker over the charging port, speaker and s pen slot.. We're you even watching the video?

@ljays1029

Жыл бұрын

@@decathec oh I see, I might be referring to the other similar video. But then maybe I missed it too. Thanks for pointing out.

I took 3 days off from work to install mine

@HighTechCheck

10 ай бұрын

How did it come out for you?

@hennetahgeranailo

9 ай бұрын

@@HighTechCheck good so far, but had to try a second time

Anyone else have issued removing the glue

Dont use them with spigen cases

@iloveyoushima4953

4 ай бұрын

Which Spigen case did you test with?

i bought this shit but the light was defective.

I wouldn't use one again, cheap film protectors are best.

@HighTechCheck

Жыл бұрын

For scratch prevention only, glass is better for impacts.

@teste-yh5df

Жыл бұрын

@@HighTechCheck true

@teste-yh5df

Жыл бұрын

John, good luck spending 1200$ to replace screen :)