I wish Samsung would ditch even the subtle curve on screens. But at least we now have screen protectors that work. I remember the hell i had with my Note 8

@theunknownguy265

11 ай бұрын

Well I love the edge screen and I hope they keep the edge for ever inshallah alhamdulilallah

@bobbuilder118

9 ай бұрын

I agree. Most annoying thing about most flagship phones

@bobbuilder118

9 ай бұрын

What do you like about it?

@manuelpiston

8 ай бұрын

They will now

@fallback8314

7 ай бұрын

that's why i got and love the bay pixel pro 8! it's the first high end phone with a flat screen since the samsung galaxy note 5.

PSA for anyone with tight fitting cases. As some have mentioned, this screen protector might be a hit or miss with certain phone cases. Unfortunately, it didn't work out for me with my Mous (brand) phone case as the case is very tight fitting and would wrap around near the edge of the screen. For this particular reason, I kept experiencing issues with micro-bubbles, corner lifting, and edge lifting due to the tight fitting case pushing up the glass. This became an huge annoyance and made it difficult to type or detect buttons along the lifted edge. I've been using it for a few weeks (since release of S23 Ultra) and the edge lifting seems to have gotten worst as the adhesive has lost it's tackiness. Fingerprint sensor was a bit problematic for me as well even with the touch sensitivity setting turned ON. Don't get me wrong, the tempered glass is definitely amazing (feeling) but wish it would had worked out for my situation. Definitely hoping for some better solutions (if any). Side note: For installation, follow the exact steps mentioned in the video for installation! If you don't apply pressure down the middle first, then you'll end up trapping air pockets in middle of the screen.Do it correctly the first time and it might save you some headaches! haha 😂

@Yame39

Жыл бұрын

Which Mous case do you have? I have the clarity 2.0. I was going to purchase this screen protector.

@Tackyauto

11 ай бұрын

Could just use the cases in this video? I’ve got an official Samsung leather case, caudabe sheath and a dbrand grip on order and will get the official Samsung case in this video and this screen protector and do some testing

@AncientAdventures

9 ай бұрын

Yes mine went smooth too but it won't register my prints at all.

@fallback8314

7 ай бұрын

the "solution" is samsung needs to stop with these absolutely USELESS curved screens. i have the phantom black 512GB s23 ultra but haven't used it since i got the FINALLY flat screen bay pixel pro 8.

@toxicfrog6943

7 ай бұрын

​@Yame39 what did you get instead I done the same thing

2 thumbs up! Had 2 new phones to protect so I bought 2 boxes. The first one was perfect. I just followed your directions. I cracked the next one while trying to remove air bubbles. I got a little lazy and tried to catch 2 bubbles that were too far apart. The 3rd was a charm. We ordered several different cases to try. Neither of us want to use the camera protectors since we've heard too many stories about foggy lenses, etc. We live in the humidity capital of the US. So camera protection in the case is important. Just a small lip would be fine. This screen protector went on just fine with both the ES Boost Kickstand case and the UAG Plasma. No lifting that I can tell. I wish the UAG case had a bigger lip of the front screen so I might keep looking for a different case. I have always used the Speck Presidio Grip case but there is no camera bumper this time. Disappointing. I drop my phone at least a couple of times a month. Never had any damage using the Speck case. If camera protection is not a deal breaker, I highly recommend. I'm going to be returning mine. Since I still have it, I tested and the Speck Presidio Grip case worked fine with this protector. BUT - the Speck Presidio Perfect Clear was a nightmare to get the phone out of. Once I put the screen protector on, there was no way I was going to try to put the phone back in that case. UPDATE. I just tried the ESR Shock Armour Kickstand and I think I've found my winner. Not problem with this screen protector AND it gives me the front lip around the case and camera protection on the back. And a kickstand. So the 2 case winners are that one and the ESR Boost Kickstand. Pretty much everything was reviewed by your awesome channel, except Speck. Used your links to help support your wonderful work! Hope this info helps someone.

PSA for people with the official galaxy s23 ultra leather case, no issues on my end with the protector lifting or causing corner bubbles. No issues here and it's a good fit.

Bit of a PSA for you all: if you have a case that grips tightly around your phone edges, like the Spigen Tough Armor as I do, then it will lift this Milomdoi scree protector up. I tried applying it twice and screwed up with not applying force causing bubbles, but I noticed that the edges were being lifted up.

@micahjohnson9184

Жыл бұрын

Dang, thanks for the info! I'm getting the Spigen Ultra Hybrid S clear case. So, I guess I'll have to look for another screen protector. I'm curious to know about the screen protector covering the selfie camera with no cut out. Do you see a drop in quality when taking pictures or video?

@Garrett1974

Жыл бұрын

@@micahjohnson9184 I had the Mowei UV protector on the S22 Ultra, also no cutout, and I have to say I didn't see any difference, no weird glaring or haze or anything. I'm sure this is fine as well :)

@Garrett1974

Жыл бұрын

This could all have been avoided if Samsung hadn't made this screen curved... the curve is so minimal right now that I'm even thinking what's the point, just make it flat already.

@micahjohnson9184

Жыл бұрын

@@Garrett1974 Thank you! 🙏🏾

@triplek-dysongamingwithdan7771

Жыл бұрын

@@micahjohnson9184 I didn't get to test it with my camera, as I was putting it on before I ever set my phone and got access to the camera. I feel like it would slightly drop in picture, but I'm not entirely sure.

Hi there, question if i could - What do you consider the *Toughest* protector and case combo? Ive had my S23U less than a month, and despite a case and a glue on protector it now has two seperate nasty cracks in it from drops onto gravel. I used to run Otter Defender cases, but what they offer for the S23U isnt anywhere close to what it used to be. Any thoughts? Thanx!

I was quite hyped about this screen protector and jumped few hoops to get one. Then once it was installed, I'm not impressed that much. The black bezels cover part of the screen sides. Fingerprint does work but you need to press quite hard. Overall touch feel on the screen is also altered because the protector slightly thickens from the middle to the sides which reduces sensitivity a bit in the thicker parts. Not to mention the sharp edge of the screen protector is well above the actuall phone which creates a gap - it'll catch all the gunk from your fingers, dust, etc. I'm curious for how long I'll have the nerves to use this and then modestly return to a cheaper hydrofilm based protector.

@SilentlyPrickable

11 ай бұрын

Great, one day after the installation and quite obvious flaw emerged. The glass edges which are on both sides freely in the air are fragile as hell. I don't know I bumped my phone with but I just found out that the protector is chipped (the whole day was in my hand or on a table...).

This screen protector is probably the best full adhesive screen protector that you can get for the S23 Ultra that does not require mathematical engineering degree to put the liquid adhesive screen protectors on. Yes it does cut part of the visible screen due to the black borders around the screen protector but it's minimal. A lot of cases that wrap around the screen itself will lift the screen protector especially in the corners I will recommend rhinoshield case it goes up right to the screen protector without touching it only bad part it's a little expensive for a case.

@Shady88Italy

Жыл бұрын

You say it's expensive, but you haven't bought Casetify

@fallback8314

7 ай бұрын

rhinoshield crash guard?? i bought one for my note 8 a few years ago but was too scared to use it lol

The black borders also cut off the visible part of the screen reducing the screen size of what you see. So it is going to hide some of that screen. Personally its got too many cons to be worth it to me.

@ilm-youtubestories

Жыл бұрын

no bro, its outside of the bezel. i'm using S23 Ultra Protector

@Statistic189

Жыл бұрын

@@ilm-youtubestories I've used it I know for a fact it covers the screen lol

@wingriderrr

Жыл бұрын

​@@ilm-youtubestories which case you are using

I was pretty excited after installing this - took a little extra time to pry the corners and get the bubbles out, and when I was done it seemed nearly perfect. Then, alas, I could not get the phone into my Spigen case without the corners of the screen protector peeling up. I tried over and over, stretching and prying the case, but finally admitted defeat while watching the bubbles' inexorable spread across my screen. I removed the Milomdoi; corner protection far outweighs screen protection for the moment, I figure...

@Flemo2140

Жыл бұрын

Did you find a screen protector that worked with your Spigen case? I had the same thing happen to minee with the Spigen tough armour so now looking for a new screen protector

@shinyobsessed1271

Жыл бұрын

@@Flemo2140 I didn't. I ended up using an OtterBox Commuter case with a Whitestone Dome screen protector. I hope you find a good solution for your phone.

Managed to install fine. Fingerprint sensor worked fine too. Got all the bubbles out too. Just kept lifting with my case - Spigen.

It worked for me. Thank you so much. Subbed!

Thank you for you instructions and scratch tests

Thanks! This is how every review should be done! ... Well done man!

thank you. i just switched back from an iphone to this and was having a hard time finding a screen glass with full adhesive since it's so common for iphone protectors.

Could you make a video of what cases are compatible with this screen protector? i bought the ringke fusion x as you recomended on other video and it lift the edges when is on my pocket.

I have been looking for a screen protector for nearly a week they all seem to have very complicated installations thanks for the video.

I've had something similar for the Oneplus 7 Pro, full adhesive, and you had to lift up the corners one by one to squeegee out the bubbles, but once it was done it was fully adhered, also on the curved edges yes. Hope this version is somewhat case friendly... I believe the black edges are there so you can lift it up without seeing it (could be a little bubble/dust particle under there if you lift it)

@HighTechCheck

Жыл бұрын

It’s going to be a tight fit for the most part and unfortunately the only way to know how it fits with your particular case is to try it.

@jasonfaiola3897

10 ай бұрын

No good breaks way to easy trust me they suck

Just what I need. Thank you.

Does this film protect impact as well as the uv glue screens?

hi, does the finger print id works under the sunlight? I have another branded tempered glass screen protector and figer print id works indoors. Just doesn't work outdoors. Also, the screen protector I have has the cutout for finger print, a circle area with a more transparent film near the finger print area. I know this one doesn't have that.

Thank you! Just had to make a claim on BRAND NEW S23Ultra Lavender phone😭 Verizon rep sold me cover and screen protector and said I'd never have to worry buying another one...fast forward...Crack in curve which I am hearing now the curve is an issue. Ugh I've had every note and can't get away from them, cause I love my pen. I'll be ordering this cover 2nght🥰

Not compatible with the Supcase Unicorn Beetle for anyone with this case. Top frame kept lifting the glass creating air bubbles. Great installation video though. I used this instead of the instructions it came with.

Thanks for the video what is the name of clear case you have in this video

Question, will this fit the Torras s23 ultra case? I'm looking to change from a polymer screen protector to a tempered glass one.

Good screen protector I had a couple bubbles didn't do the installation the same way unfortunately came across your video afterwords but , One thing to mention it does slow down the overall screen response, I have the screen protector setting turned on just noticing phone doesn't feel the same as before Big mention

Thanks for the review. She helped me buy a great product. Installation is really simple

Can you tell me about the black border.. is that black border blocking the screen.. i cant go for uv tempered because will spread into spen or front speaker.. so i want full glue tempered with fingerpint support also.. i only find this model.. i tried lito 3d.. but fingerprint is not working correctly.. also its black boder blocking screen little.. so pls tell me is this blocking the curved screen or top

Installation was very easy, i had no bubbles on the first try. I did it like you. 4 corners press first, then the full middle section and in the last the sides nice and slow. worked perfect.

@HighTechCheck

Жыл бұрын

Nice!

@vinnieducy947

Жыл бұрын

Do you use a case? If so, which one?

@stefank.4746

Жыл бұрын

@@vinnieducy947 Only fitting case i found so far is from cresee, more testing tomorrom 😅

@stefank.4746

Жыл бұрын

@@vinnieducy947 After more testing i can say very many cases fits for the tempered glass protector. Only not fitting was from spigen, caseology and Ringke...

@Bush0369

9 ай бұрын

​@@stefank.4746I think otter box also cause some bubbles occasionally

With it's 0,16mm thickness allows the fingerprint sensor work pretty well and giving a very decent protection against scratches, I love that one over the thicker ones.

Thanks for helping me make my decision to purchase this brand protectors and camera covers. These are absolutely fabulous. High Points: Excellent value (includes 3 sets) and the price is an outstanding value. Highly recommend. Thanks again for sharing your discovery.

Can we use this glass screen protector with subcase pro, otterbox pro or i blason

Which case you are using with it?

You mentioned the adhesive protection.. Those the plastic tpu? I am a clutz with this temper glass break with one fall?....also you can buy individual glass cam glass i thought that was what you were putting on it has a template like that they fit around the cam and stay on to protect your lenses....getting my galaxy in the mail today excited don't know what case to get I have a note note 9 with that plastic screen protector tpu....and 4 years ago I bought the clayco exeon by sup...tpu back bumper that comes with a screen protector built i just through the one extra and have loved it. One bubble wbe screens off but can't see if with the display on. Cut outs are much bigger that the more note 9 for the 23 ultra, so I am looking g for tempered glass for the lenses...poetic guardian seems like my only choice or punk case come with and extra frame without protector if you choose your own..I just wanna know if anyone can tell me if I drop my phone in the the way I have before with my current bouncy case clayco...saved me every time, same kinda for the new one...will the tempered glass break...will I be going threw sheets of tempered glass, or tpu? Open to suggestions around the board... toughest bumper plus SP I stalled....has to be able to survive a 5 foot fall if it falls out while I am doing pull ups that would be the worst it would get next to short falls out side which rarely happens...gym is my concern falling off tables...appreciate any suggestions.

The best screen protector that I ever found was one that Samsung pre-installed on all S20 Ultra from the factory. Never had bubbles on it and still going strong to this day. I upgraded since to the S23 Ultra and the film seems to be the best.

@HighTechCheck was is the case that you are using in this video. Looking for a case and screen protector combo

AMAZING!!! a bit more complicated than how screen protectors work on iPhones but this is still amazing that I can use a glass screen protector on my Samsung in the future when I eventually get one😂

And no awful hole!! Been struggling to find a good screen protector for my 23 ultra, so I think this one will be my next purchase for sure

will this screen protector work with a samsung case. I got my case from the samsung store.

Thanks for the great installations and reviews. I did try this one and fingerprint was hit or miss. no bubbles but the fingerprint was annoying so I pealed off ever so gently from the corners and it quickly cracked in the center and was an absolute mess getting off. Little pieces where left on my screen and thankfully I escaped with no damage. Went back and will probably stay with AM film.

@HighTechCheck

Жыл бұрын

I’m sorry to hear you had a bad experience, I typically have issues with the sensor when my hands are dry. It helps if I use a bit of lotion and that seems to help.

@chumley2010

Жыл бұрын

Agree 100%. Had to fight to even register any fingerprints with this one on - even with the sensitivity switched on, and getting it off was the worst! Shattered like safety glass into thousands of shards. No bubbles in the center but a battle to rid them from the curved edges. Gave up and went back to a Torras film protector that's as good a film protector as I've ever used, film is just not the same as glass.

@backpain100

Жыл бұрын

Just installed it yesterday and I had the same issues. Finger print scanner doesn't work well, may be worked 25% of the time. Also cracked when i tried to remove it. Perhaps they can refine this screen and it'll be a hit product.

@Alchemy.Gaming

7 ай бұрын

I know this thread is old but do either of you remember if you increased touch sensitivity in settings?

You have just sold me 2 of these as I'm picking up 2 x S23 ultra's for my wife & I on the 8th April. Nice demonstration video. And funny enough, I had plans already in place to purchase 2 of the case shown in this video - the ESR clear kickstand case. Nice to see it fits with this screen protector as you demonstrated in this video.

@basecamp20

4 ай бұрын

Bot

I had a few bubbles left over. My method was to lift up the protector until the air traveled to the bubble. Once there I left the protector pushed up and as a squeezed the air out, I slowly lowered the screen back down. Worked well for me. Also for the fingerprint, my finger was completely dry and glided across the screen so the fingerprint would not register. I moistened my finger just enough so it felt a little tacky on the screen, then the fingerprint reader registered my prints.

The adhesive glue glue went in the s-pen slot how long will it take for me to get it out like whats the adhesive expiry ? Would appreciate the help 🙏🏼

For 17€ compared to Whitestone Dome which is 60€, clearly this one is a must-have but i still preffer the installation method from Whitestone. But anyhow, a great video, i like the camera protection.

What would be the finger print accuracy rate would you say I've the uv one from imbzbk and love the accuracy of it....only grip is it's hard to install and I've 2 tiny bubbles that no one would noticed but me 🤣and it's really bothering me

@leeuniverse

Жыл бұрын

Fingerprint doesn't work worth a donkey crap... Stay away, even with struggling to register two finger prints, and increasing screen sensitivity. Could have been a decent enough screen if it actually worked.

😂I tried to remove that last bubble in the corner by just barely lifting the glass with the tool - crack. The second cover fit better. Thought I had it made. This time a couple of small bubbles formed but no problem. A half hour later I set my Ultra on the wireless charger and elongated bubbles formed the full length of the phone on both sides at the curve. Several larger bubbles formed at the top and bottom. I tried to squeege the bubbles to the corners on both sides and the glass cracked in two places. Nasty mess to get off. Back to the film.

Thank you for the video. It was great.

Just ordered mine today 🤗 The am film wasted my time and money,The liquid screen protectors are a headache for the s23ultra hopefully I'm satisfied with this one thanks for the video and installation 👍

What case are you using with it? I tried with a spigen rugged armor and it lifts out on the sides. Not compatible unfortunately Spigen Rugged Armor 👎 Onn Dual Layer Clear/Black case 👍 Speck Presidio 2 Grip👎 ESR Case with stand👍

Will this work with UAG cases?

Great screen protector. I have two issues though. The first one is the accumulation of finger prints. I'm always wiping down the phone throughout the day because of my greasy fingers. The second issue would be the fingerprint sensor. It 90% works. But that 10% does get a little frustrating. Especially after washing and drying your hands. It will not recognize your fingerprint. I have to try at least four or five times before it registers. But everything else is great. I think I will set up my facial recognition in case this happens to me again.

@shanedavis9170

11 ай бұрын

A oleophobic coating will fix this

@roamingkeraliteKL05

4 ай бұрын

The second issue is with the phone , even I have the same without and protector

So, with this screen protector what cases actually work withoutany issue ? I'm looking for minimalist look but good protection.

@MastiffRonin

Жыл бұрын

Simtect Camera Protector Case and Carveit Wood Walnut Case works. the carveit was way more premium then i thought it would be. Ringke and Spigen cases did not

Are you going to have some Screen Protectors to test with the S24U soon? I hope we have many more options of screen protectors for the S24U and it's "nearly" flat display!

If only they gave us the flat screen display. I’d buy it in a heartbeat!

@Jens_Roadster

Жыл бұрын

The curved display is not that bad.

@darkcontrast

Жыл бұрын

Buy S23+ Some pepole prefer curved.

@sockDbutts

Жыл бұрын

the only thing stopping me from getting a s23+ is the lack of s-pen support. curved screens are just more of an inconvenience.

@AKA_MAZZA

Жыл бұрын

I was really hesitant to buy it because of that exact reason too. I was leaning towards getting the S23+ but I wanted that extra large screen and battery so for that reason I went for it. Did not disappoint. That curve is hardly noticeable. Plus I get the spen too. 😅

Will there not being a hole cut out for the front camera effect front camera pictures ? I read that it will if you use flash it will cause the picture to be blurry is this true

Does this cover the edges as well

Does this case work with the OtterBox Symmetry Clear Series Case?

It's really nice Tempered glass screen protector. Finger print just works fine. Very easy to install. 1st tried and no bubble at all. highly recommend !!!! Thanks for your review !!!

@wingriderrr

Жыл бұрын

Which case you are using with it?

Plz give the link of the same transparent case that you showed in this video?

Spot On!

No front camera cut out? Wouldn't that create issue in selfie picture quality?

Finally a good tempered glass protector for Samsung, i hate the messy liquid cuz it spills all ove the phone on the speaker and the edges of the phone, and the other cheap ones has only glue pn the edges and their too week, they broke easy and when you put the phone case that thing start lifting. So this is perfect!!!! Just gonna prder it RN!!!!!

I've bought atleast 10 packs of this type of protectors (so 20 total), they break very easily. And as others said, certain cases cause the sides to lift. Definitely not worth it in my opinion.

Is this screen protector compatible with UAG Monarch case?

Is it case friendly?

These are great however the edges are so brittle I've gone through 8 in 4 months.... the absolute lightest bump on the edge shatters it

using it with the ultraclear mous case seems to be working well enough. i just suck at installing these so lots of microbubbles for me

What about the black frames of the glass protector? I heared interfear with some of the display, since you have a black background in your cellphone you may not noticed, I would love to see another review checking this and also using the front camera since the glass covers it

@MastiffRonin

Жыл бұрын

I also have this protector and it went on flawless! The fingerprint sensor and spen work great as well. The black edges do seem to slightly interfere with the curved part of the display blocking some of the waterfall bezel. it doesn't bother me much but this would be hands down best protector if it was completely clear. seems stronger then other UV brands with not mess. front camera seems perfect to me to interference. i did not use the back camera protectors due to how it just sat across all the lenses

@RonaldRodgz

Жыл бұрын

@@MastiffRonin Thanks bro

Yeah I bought this one first black border isn't that annoying to deal with but the front lense of the camera is covered in the adhesive and blurs the photos a tiny bit and the edges get slightly lifted by the phone case definitely no my favorite

Will this fit with a otter box defender case?

I have the Spigen Rugged Armor and the Privacy version of this fits perfect

i'm using this screen protector with an otterbox defender case, Perfect pair!! No edge lift what so ever, Finger print works flawlessly and very easy install. This is a no brainer, No need for a wet install protector. Thank you so much for the rewiew! ❤❤

Best screen protector I've ever used 👌it's on my s23ultra no issues whatsoever

Is this compatible with casetify phone cases?

This screen protector breaks very fast.. it has nice coverage but you will need to replace it every couple weeks.. I went through 3 in a month without dropping my phone ever...

@Flemo2140

11 ай бұрын

yep same thing happened to me

Just installed it, it fits perfectly my case, when i say perfectly i mean 1 more millimeter top or bottom and i would have to return it. Fingerprint accuracy doesn't seems to be the best tho, and it's definitely slower....but it works

@HighTechCheck

Жыл бұрын

It is a tight fit but like you said, it fits. It’s been impossible to find a good tempered glass protector that’s doesn’t use liquid adhesive that’s worth it. I was so excited when I saw this lol

@vinnieducy947

Жыл бұрын

Would you mind telling us which case you are using? I need that case. Please!

@G-O-N-x

Жыл бұрын

@@vinnieducy947 UAG pathfinder

@BenItBuhner

Жыл бұрын

@@G-O-N-x *buys one of the most expensive cases*

@antoniomorton3029

Жыл бұрын

I agree with your assessment. I have come to the same conclusion.

as this screen protector cover the front camera, does it affect the picture quality..?

@christinetan3008

Жыл бұрын

Unfortunately it does. I am still looking for other options for tempered glass for s23 ultra..

I installed this screen protector. It looks perfect, no bubbles or dirt beneath it but the fingerprint sensor doesn't work at all. Any advice?

How does is handle drops, cause I will not purposely drop it, but I something that takes a drop in the gym with a bouncy case like a poetic guardian with instead the frame with this protector...this glass vs tpu film...I would appreciate your recomedation...23 ultra of course...

After holding this in a pocket for awhile I observed it is moving. I can even move it back to left, right, down, up. It's strange, force pushing this will move this successufly. It catches scratches also, little bit disipointed. I also don't understand why version which I have front camera open space which I don't see on your video.

It fits well with poetic cases. Downside, fingerprints reader is not working anymore

Does this work with UAG Monarch pro cases?

My only concern is the black edge of the screen protector taking away from the display. I know on my previous models with curved screens those black edges always block some of the screen. How much did it actually take away with this one?

I use an Encased thin armour case and it doesn't work. The bubbles keep coming back along corners and edges even after I press them out. Also I used my thumb to push a bubble out up near the camera, and when my thumbnail went over the lip the force of just my nail going over the edge fractured the protector from the camera notch down. (I'll take the blame for this) Amazon user reviews are only 2 stars out of 1800 reviews so not impressive in the least. (Canada) It is the ONLY non liquid glass protector with full screen adhesive though. I'm hoping other companies make alternative options soon.

Just ripped mine off... Bubbles galore and I followed the instructions completely.

@kaiichinose9590

Жыл бұрын

Yeah its a not a terrible protector just not a fan. Just get the 2 pack of white stone dome. Just when your cure the Whitestone Just double the time it says. Then after you wipe off anything excess cure it again. Works feels and looks amazing.

@G-O-N-x

Жыл бұрын

Just finished applying mine and it has ZERO bubbles, i took my time to apply it perfectly

@MastiffRonin

Жыл бұрын

@@G-O-N-x Same here and quality seems stronger then whitestone. My edges would always shard and crack. i do wish it didnt have the black edges though

@kaiichinose9590

Жыл бұрын

It’s not too terrible I have just mastered white stone dome and over the years they have served me the best. No popping up with cases no interference. It's all in the curing process. I triple cure mine and never have issues.

@jimmccourt4270

Жыл бұрын

My first try happened also. I carefully lifted with the plastic thing and tried again, slower, more force, and using 2 hands on the squeegee. Worked fine 2nd time. All bubbles got worked out.

My question is how well did it hold up long term after installation?

Will this work for the otterbox defender?

I just installed this and it's a no-go for me. It's absolutely not case friendly. every case I've tried with this has made it start peeling immediately from the top, bottom, or both. pass.

Any chance at a video of trying this with different "rugged" cases that are not too bulky. Or anyone know of any that works well with this?

That slight bit of resistance you say it's too much for me there's too many good ones out there a little thicker but are really good glass and have zero

Idk, I tried this one before White dome glass. It was horrible with FP sensor even after re-registration

@johnperez8600

Жыл бұрын

Same here. I ended up ripping it off and returning it. The fingerprint scanner worked, but only 25% of the time. The times it did work, it was definitely a lot slower, and I had to press down pretty hard. I don't recommend it. I bought the one from Whitestone and I'll see if it's any better. It's pretty expensive tho.

@G-O-N-x

Жыл бұрын

it's not the best yeah but it's ok when you put your fingerprints multiple times

Can you also leave the link for that clear case 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽

What case is that ?

Help. Can't find any more of these. I've been a frequent buyer of these same product for s23 ultra. I've used to buy them on Amazon. Now they are not available. And can't find something similar,. They all got that nasty hole in the middle. Do u know where to buy more or a similar product with out the finger print hole

Does it have a noticable hole for the fingerprint? Wasted 25 bucks on a protector with this annoying circle

Did you check out spigen screen protector?!!

Why do they make the edges black ? Is it because of the adhesive?

Hey Tony i have this glass...I have the clear unicorn beetle pro, and it comes with to frames one with a screen protector one without...you have done a video on that clear one i have....right now just to use for the moment...not sure why, but writing with the s pen sucks... Have an old note 9, that has a clayco supcase Exon case on it conscience about it and his Works flawlessly. I can get by with the built-in screen protector on my 23 Ultra with the unicorn beetle Pro, but the pain was an absolute disaster that's one of the best features of this phone trying to figure out why would you like that maybe cuz it's new and there's no oils on it yet, or that sticky feeling that you peel off left to stickiness behind I don't know, very tempted to take it off and use the frame of my own protector, not sure in what order you did that Whitestone Dome or this tempered glass I hear that you with the 9h, date-wise what do you like to Whitestone Dome or you like this one better and which one would go better if I was just going to use the frame for my unicorn beetle Pro? If you get back to me I really appreciate it I just started using the S-Pen on my Note 9 before I got the 23 Ultra lot and I really like it and just kind of funny not to use it. Awesome videos.

Hitheret After watching this video, I also got this glass for my S23 Ultra, but since I put it, my fingerprint doesn't work, and it's impossible to set a new one even with touch sensitivity ON. I need help

I see that it doesnt have a cut out hole for the camera. Have you tested out the camera before and after installation, in different lighting situations?

@HighTechCheck

Жыл бұрын

I didn’t go that in depth for testing it