Thanks for posting

I did a video of this a year or so a go..stainless is the hardest to do mild steel will be very easy but either way you must rotate the pipe 1/4 turn or so to get a round result adding the air/hydralic pump makes very good but you still need to take your time with stainless... Also the hole punch kit you use may have a different thread on the forcing screw so its best to check it before you buy the kit. I used the astro pipe expander and the HFT early version hole punch kit to make mine and still works well today.

@208Concepts

9 ай бұрын

Good tip on the hole punch kit. If it comes down to it, I can make my own adapter on the lathe though 🤣. As for the expander, I did figure that out and got fairly good at using it for my needs.

Well now I wanna see it hooked to the air hydraulic pump hahaha.

@208Concepts

Жыл бұрын

Going out tonight to see if I bought the right fitting 👀

@ThatV12MiataBruh

8 ай бұрын

You are everywhere on KZread

@208Concepts

8 ай бұрын

Me or 802? 802 definitely is 🤣

@ThatV12MiataBruh

8 ай бұрын

@@208Concepts 802 is everywhere 🤣

@802Garage

8 ай бұрын

@@ThatV12MiataBruh Hahaha ya got me. Good ta see ya.

You’re adapters make me feel some type of way..

@208Concepts

Жыл бұрын

😂 me too. they're just so nice....

Where did you buy this from?

@208Concepts

Жыл бұрын

Amazon. I'll put the links in the description later tonight

@208Concepts

Жыл бұрын

I forgot to post links. Let me do that right quick 🤣

So basically the hand pump is garbage and don't buy it

@208Concepts

10 ай бұрын

I wouldn't say garbage, just that it struggles with stainless. It worked on aluminum great, and I imagine aluminized steel would be fine too.