Best video on the topic yet. I see you lined up the red dot with the valve. You made it look easy...........I suppose the wheel you are working with makes it easier than most and I think the fact that you lubricated all the right spots also makes a big difference. JOB WELL DONE!

@mrwiback

3 жыл бұрын

Well, thank you! Yes the tire dimension helps. Also studying other videos and planning the work makes the job easier. Cheers for commenting!

By far the best tire mounting video! You are the only one who protects your rims! This is way to easy... why didn’t I think of that!

@mrwiback

3 жыл бұрын

Thank you so much! That is why I like to do things myself. I get to do it my way. Cheers for commenting!

@gregt722

2 жыл бұрын

@@mrwiback update for you... I did this and mounted my tires myself. It was too easy!

@mrwiback

2 жыл бұрын

@@gregt722 Well done! What size tire? What car? Cheers!

@gregt722

2 жыл бұрын

@@mrwiback I did a set of 15” on my old 1988 F150, 17” on my minivan &18” on my Murano. It’s so satisfying and I saved $300!

@norbiesison9257

Жыл бұрын

Where did you buy those rim edge protectors?

I think this is the best on KZread , Considering the the tools you had to work with you done an excellent job, I've been 23 years in the tyre trade and i must admit i hate changing car tyres by hand.

@mrwiback

Жыл бұрын

Cheers, appreciate your comment! 🙂

Slick and precise!!!! This is the best one I've seen so far and I already saw a ton of 'em!

@mrwiback

Жыл бұрын

Thanks man! Cheers for commenting!

Just replaced a strap-on pressure monitor on my 20" Ford rim with a low profile tire. Crackhead at the tire place broke the band and taped it with electrical tape. Great video. Fifteen minutes work. Thank you for the tip about crushing the tire into the drop rim...

@mrwiback

Жыл бұрын

Thanks buddy!

Thanks man. I got a wheel and a used tire in good condition to keep as a full size spare to get rid of my useless donut spare. Hopefully it will go as smooth as this.

@mrwiback

2 жыл бұрын

A spare is always good to practice on. Low risk so to stay. Difficulty depends a bit on the tire profile. High profile - easy, low profile - trickier. Good luck and cheers for commenting!

Damn , dude you made that look so easy.

@mrwiback

2 жыл бұрын

Thanks! It's a very easy tire dimension to to by hand. Cheers for commenting!

Fredrilk, thanks, very nice video.

@mrwiback

4 жыл бұрын

Thanks for commenting! Also check my other videos. Cheers!

brill ,,you made that look easy,,,

@mrwiback

4 жыл бұрын

Well it's really not that difficult, especially with a balloony tire like that. Cheers for commenting!

well done sir, flawless job! and that rim looks spectacular! may I ask which car have you installed it on ?

@mrwiback

2 жыл бұрын

Thank you so much! The rims är original factory alloys and I have them on my 1975 Corvette C3. instagram.com/p/Bnok67OhjG3

awesome work very nice cant wait to see them on car

@mrwiback

6 жыл бұрын

Thanks for commenting! They look awesome. Please check my Instagram. instagram.com/p/Bl8TVC2B_pO/

Very satisfying.......you took care of the rim....many congratulations to you... you're awesome!!!😉👍👏👏👏🙏🙏🙏🙏🙏

When there's a will. There's a way!! Good job sir

DAMN! SO much easier than motorcycle tires! I thought it would be way harder than smaller MC tires....thanks!

@mrwiback

4 жыл бұрын

Yes! Especially the front tire of My motorcycle is a PITA. These balloony tires are a breeze to mount. Cheers for commenting!

I cannot believe how easy you made that look ? What is that lube compound you used?

@mrwiback

2 жыл бұрын

This tire is easy to mount thanks to the to the high tire wall, which is very flexible (and of course a little bit of practice). It is much harder with low profile tires. The lube is a generic brand tire lube. Many parts stores sell it. Thanks for commenting Tony! Cheers!

where do you get those mounting pads I have a manual tire machine. but this looks much easier.

@mrwiback

4 жыл бұрын

Thanks for commenting! If you search for 'plastic rim protectors' you will find them in many online stores. Cheers!

Fredeilk, what type air compressor you use in your garage? Can you recommend one for pumping new fitted tyre like yours? Following your video, I changed my car tyre but my small inflator could not pump it up due to low power. Thanks a lot.

@mrwiback

4 жыл бұрын

I am using a 2200 W 2-cylinder compressor with a 50 liter tank. Much like this one: www.jula.se/catalog/verktyg-och-maskiner/tryckluft/kompressorer/kompressorer/kompressor-003364/ Cheers for commenting!

@zenghailu6274

4 жыл бұрын

@@mrwiback Thanks a lot for letting me know.

@cuttheloop

2 жыл бұрын

remove the valve from the stem

Thanks for video. Please,tell me,is there any glue added,or what is that thing added on tyre?

@mrwiback

2 жыл бұрын

That is tyre lubrication to make the install easier. Some use just soapy water. I bought a generic brand tyre lube. One can use glue, but that is only needed when the rim is pitted or corroded and you smear that only on the mating surface on the rim. Cheers for commenting!

Best video on KZread very genius 👍👍👍👍

@mrwiback

3 жыл бұрын

Cheers buddy! 🤗

@charlies.5777

3 жыл бұрын

@@mrwiback Nice video!!👍 JUST curious, what were you lubing the wheels and tires with @ 0:14 and 1:30 ??

@mrwiback

3 жыл бұрын

@@charlies.5777 It's a generic brand tire mounting lube/paste/gel. Google it and you will find a product near you. Cheers for commenting! 👍

@charlies.5777

3 жыл бұрын

@@mrwiback Thanks for your help. I'll need to get some of that.

great, rim is 7 or 8 inch?

@mrwiback

5 жыл бұрын

The rims are the optional factory alloys, which are 15x8". Cheers for commenting!

Well normally with a new tire you wind up with a 3 or 4 inch gap between the bead of the tire and the rim flange which makes it way more difficult and requires a bead blaster to-seat the beads.. .

Thanks. What is the compound in the white tub if I may ask ::

@mrwiback

3 жыл бұрын

It's a generic brand tire lube. You can find it everywhere. Cheers!

That’s professional wheel handling by hand

@mrwiback

2 жыл бұрын

Thank you for saying that! 🙂

Great vid

@mrwiback

2 жыл бұрын

Cheers!

ASMR to my ear

you would of made it easier if you would of started the mounting process from the backside of the rim...also after you completely air up its recommended to deflate completely and re-air ....sounds wierd but as your tire shows you where to line up valve stem with dot marked on side wall...its prebalanced..the inflation and deflation the rei-nflation relaxes the rubber and actually ensures the tire isnt "out of round" which most tire manufactures recommend

@joem4664

4 жыл бұрын

Is this the red or yellow dot ?

@robertcommodore1938

4 жыл бұрын

if You start from the front first . and then Finish it from the back side YOU May Bend Your Rim When Mounting It . Because there is nothing Supporting It. The Front Of The Rim Has Rib's To support It So It Won't Bend. the back Can Bend Much Easier. i hope This Help's someone out there. Peace

@user-yd6yj4yt5q

11 ай бұрын

"Pre-balanced".....that's funny. Who told you that??

nice job bud

@mrwiback

Жыл бұрын

Thank you! 🙂

Good video, are those rim guards home made or can you buy them?

@mrwiback

3 жыл бұрын

Thanks! Search for plastic rim protectors and you will find them.

@eddierodden

3 жыл бұрын

@@mrwiback Thanks I got some and they helped me. Now I'm struggling with getting the tyre to bead.

@mrwiback

3 жыл бұрын

@@eddierodden How much pressure are you using to inflate the tyre?

@eddierodden

3 жыл бұрын

@@mrwiback Foot pump pressure and it comes straight back out.

@mrwiback

3 жыл бұрын

@@eddierodden Oh, you need quite a bit of pressure to seat the bead. Compressed air is the way to go. Any shop or gas station should be able to help you. About twice the recommended pressure should do it. It can be a bit scary but the tyre can take it. Just inflate till it pops (both sides). Good luck!

fancy rim protector >_> good day to you

how did you balance them

@mrwiback

5 жыл бұрын

A friend has a proper wheel balancer.

- Ładna felga :)

@mrwiback

4 жыл бұрын

Cheers!

Where can I get bf Goodrich tyre's to buy

@mrwiback

5 жыл бұрын

They're sold online in a lot of stores like JEGS and Summit Racing. You can also check eBay. Cheers!

Promise y’all it’s not that easy

what are you using for lube?

@mrwiback

2 жыл бұрын

It's a generic brand tire lube/mounting paste.

What size tire is that

@mrwiback

3 жыл бұрын

Hi, tires are 255/60 R15.

What's the purpose of wearing surgical gloves?

@mrwiback

3 жыл бұрын

To protect my hands without losing fingertip precision (Swedish expression). They tear easily though so you need a big box. Cheers for commenting!

I'm speechless

this is my first time and my god, mine won't budge on my last step.

@eegg6954

Жыл бұрын

You have to scrunch the tire into the drop rim as you pick the opposite end over the rim. Pay close attention to what his feet are doing, or you'll NEVER get it.

Do you set up the pressure coming out to the max?

@mrwiback

2 жыл бұрын

Yes, full pressure. Of course I stop inflating as soon as both sides pop and then insert valve and inflate to correct pressure.

@rafars2246

2 жыл бұрын

@@mrwiback man, thank you so much for answering. Is like no matter how many ways I formulate the question to google all the results were about not overinflating your tires... And I never attempted this, and no video shows how to use the air compressor for this matter. So thank you so much again! Now I just have to figure out if the 2 gallon compressor from Milwaukee would be enough or maybe buy something else electric just for the tires.

@mrwiback

2 жыл бұрын

@@rafars2246 what are the specs for your compressor? If it can produce enough pressure you'll be fine.

@rafars2246

2 жыл бұрын

@@mrwiback Tank Capacity 2 Gallons Max PSI 135 SCFM 1.2 @ 90 PSI Attempting this with 17" and 18" car wheels.

@mrwiback

2 жыл бұрын

@@rafars2246 Go for it! 🙂

hey, what´s the name of the rim?

@mrwiback

3 жыл бұрын

They are factory alloys. Don't know any other name. Cheers!

@falkwachter6954

3 жыл бұрын

@@mrwiback ah ok Corvette orginal?

@mrwiback

3 жыл бұрын

@@falkwachter6954 Oh, yes. They were the factory alternative to the steel rally rim.

What are those plastic rim protection called? Where did you buy them?

@mrwiback

5 жыл бұрын

They're simply called plastic wheel rim protectors and you can get them on eBay or in many stores in the US e.g. JEGS. www.jegs.com/i/OTC-Tools/717/4769/10002/-1 I bought mine at Biltema in Sweden. www.biltema.se/bil---mc/mc/verkstadsutrustning/verktyg/falgskydd-2000022154 Cheers!

@GSXR750DOG

4 жыл бұрын

The link u provided no longer have them 🥴 Please advice

@mrwiback

4 жыл бұрын

@@GSXR750DOG If you search for "plastic rim protectors" on Amazon, eBay or Google you will find a bunch of online shops that will provide them. Cheers!

What did you use to lubricate the tire?

@mrwiback

5 жыл бұрын

Thanks for commenting! I'm using a generic brand tire mounting paste/compound. Lots of places sell it. Cheers!

Every other video totally scars up the wheel lip. Worse than curb rash and they act like that is fine.

Try doing that on a 45 series new tire. It ain’t happenin’.

@mrwiback

4 жыл бұрын

That would look totally silly on my car. 😂

@karkule5919

4 жыл бұрын

@@mrwiback Of course it would work on a 45 series tire if you are doing it, not some genius who thinks he can fix things from his computer's keyboard.

Does You Tube charge money if you speak on a video??

@mrwiback

3 жыл бұрын

No, I'm just shy. :)

@koenigturbo5907

3 жыл бұрын

@@mrwiback "Haa Haaa"!! funny!! you made laugh, I'll let it slide "this" time!! What were the white tabs that you used and how did you get them?/

@mrwiback

3 жыл бұрын

@@koenigturbo5907 They are plastic rim protectors and you can find them in lots of places if you just google them.

@koenigturbo5907

3 жыл бұрын

@@mrwiback ok thanks!! I just happen to have a set of brand new rims that have a sturdy plastic rim protectors but they are rounded but I still think they will work. THANKS!!

Do a 420-20 x 20 now

Lmao it is always hilarious to watch someone risk so much to save a few bucks.

@warrenpacholzuk9190

5 жыл бұрын

@@thedanburyfairracearenahis3095 Lmfao. If you believe that you can do my job as well or better than you are one delusional idiot.

@kschreihart

4 жыл бұрын

He is a tire mechanic who does not like someone showing how to do it yourself.

@johnconnolly2815

4 жыл бұрын

@@warrenpacholzuk9190 were you the one going to mount his tires? If not, STFU. You may be good at your job, but most aren't.

@warrenpacholzuk9190

4 жыл бұрын

@@johnconnolly2815 not just good jackass. I am the best around.

@hd758510

4 жыл бұрын

@@warrenpacholzuk9190 well you got the jackass part right

dont want to listen to shit music

@mrwiback

5 күн бұрын

Me neither 🎶

Good grief!!!!! Use a tire machine!!!!!

@cdnbroncolife1889

4 жыл бұрын

a tire machine = $100 charge... youve missed the whole point here .. this, you can do yourself.

@mikesecondo2254

4 жыл бұрын

@@cdnbroncolife1889 good luck..have fun!!

@cdnbroncolife1889

4 жыл бұрын

Mike Secondo = lazy

@mikesecondo2254

4 жыл бұрын

@@cdnbroncolife1889 no not really...I own 2 auto repair shops which I bustsed my ass for!!!...lazy NOT!!!

@cdnbroncolife1889

4 жыл бұрын

Mike Secondo . Ah I see. Well, you’re so successful that you should retire I guess... and just spend you’re retired years trolling you tube and the people that take the time to make decent videos like these. And why not go even one step further by adding comments like yours that are loaded with unwarranted fear inducing tone.... oh wait.. you’re halfway there already...looks like you are successful ;) at one thing