In this video, I walk you through what it takes to mount this China JK hardbody on the Axial scx10 iii chassis using the factory body mounting holes.
Жүктеу.....
Пікірлер: 31
@Brian_Mowry__BMOW712 жыл бұрын
Great job on the build and the fab work involved to get the body mounted. Looks great! Looking forward to seeing more! Liked and subscribed!
@oddsandendsrc
2 жыл бұрын
Thank you very much!
@kennethcollazo1300
Жыл бұрын
What size of shocks are in the rear?
@kevinhill2929 Жыл бұрын
Very nice work. Was going to be getting the body soon and saw your video. Nice idea on mounting body. I was going to but on my custom scx10 chassis but now think maybe on my scx10 3. Thanks
@oddsandendsrc
Жыл бұрын
No problem!
@RcHobbySteve2 жыл бұрын
I cant freaking wait to do this. THank you so so much for sharing this info with us. !!!
@oddsandendsrc
2 жыл бұрын
No problem! If you have any questions, let me know.
@RcHobbySteve
2 жыл бұрын
@@oddsandendsrc I do have a question. Where can I get the servo mount you have. Was there anything different you had to do with the pan hard setup
@oddsandendsrc
2 жыл бұрын
@@RcHobbySteve look for a scx10 iii front mount servo bracket, arount 10-15 bucks on eBay or Amazon. I go over the new panhard mount in the video, I made one, but club 5 sells the servo mount and the panhard mount together if you want to do that.
@RcHobbySteve
2 жыл бұрын
@@oddsandendsrc ok cool. I’ll look into the club 5 one. I’m making a long list of parts I want to get when I buy the kit.
@RCBirds2 жыл бұрын
Great job. You don´t see that version so often. I especially like the battery box.
@oddsandendsrc
2 жыл бұрын
Thanks!
@HBGEB Жыл бұрын
Great vid 👍
@oddsandendsrc
Жыл бұрын
Thanks!
@MrDistress Жыл бұрын
What front links sizes did you use? Great job btw!
@stylesart16 ай бұрын
Just got my first 1/10 scale. scx10.2 and it came with this body (in Orange). Previous owner cut out the entire interior to accommodate the 10.2 transmission. I am currently dealing with tire rub, and facing the need to bring the front axle forward. Thank you for your informational video! Any help on how to bring that axle forward is appreciated.
@oddsandendsrc
6 ай бұрын
If you could slide the body backwards and center the front wheel and the front wheel well, then you could just extend the rear 4 links with longer ones to Center the rear axle in the rear wheel well. Trying to extend the front axle turns into a lot of complications and geometry issues with the suspension.
@chrisischannel Жыл бұрын
what size upper and lower links did you use ?
@uniq_vidzbostonmass25 Жыл бұрын
Very nice, could u pls share where u got the Rubicon decal?
@oddsandendsrc
Жыл бұрын
I made it on a Crickit vinyl cutting machine
@uniq_vidzbostonmass25
Жыл бұрын
@@oddsandendsrc that’s very creative, thanks for sharing w/ us!
@AKTheSavage Жыл бұрын
The jeep “Brute” by American expedition vehicles is the real life version. Also, I have an Scx10 chassis with injora portal axles and the wheelbase is too short. Is it fairly easy to extend the wheelbase to make this work? It looks like I’ll have to move the rear shock towers back further as well
@oddsandendsrc
Жыл бұрын
If you are using the original SCX10 chassis, it will be hard to get that to work with that transmission because you will have to do a lot of cutting. All you have to do to extend the wheelbase is to put longer links on the rear
@AKTheSavage
Жыл бұрын
@@oddsandendsrc Well, once i get the trans mounted i'll either trim, or purchase a LCG transmission. Have you found many accessories specific to this body? I have found lighted mirrors that integrate well. Injora has some tubular doors that i believe would work as well.
@williamstallings39692 жыл бұрын
How did you extend the wheel base? Longer links? If so which ones did you use for the front? Thanks in advance!! G
@williamstallings3969
2 жыл бұрын
Great builds!!****
@oddsandendsrc
2 жыл бұрын
I dont know how long the original links were, I bought this 10.3 chassis used with no axles or links. I ended up with 90mm links on the bottom front and a 85mm link on the top front. I used the rc4wd medium length rod ends with those. I bought the yeah racing 6mm links off of ebay. If you run a bigger tire than I did, (105mm) you will need to extend it further.
@MrRui33333 Жыл бұрын
this body is compatible in traxxas trx 4 sport ?? sorry my ingles
@oddsandendsrc
Жыл бұрын
I have not personally done one, but I'm sure it could be done with some trimming
@year1camaro2 жыл бұрын
hard to compare lexan and hardbody that way.
@oddsandendsrc
2 жыл бұрын
I enjoy building both, but this is a decent deal for a prepainted body.
Пікірлер: 31
Great job on the build and the fab work involved to get the body mounted. Looks great! Looking forward to seeing more! Liked and subscribed!
@oddsandendsrc
2 жыл бұрын
Thank you very much!
@kennethcollazo1300
Жыл бұрын
What size of shocks are in the rear?
Very nice work. Was going to be getting the body soon and saw your video. Nice idea on mounting body. I was going to but on my custom scx10 chassis but now think maybe on my scx10 3. Thanks
@oddsandendsrc
Жыл бұрын
No problem!
I cant freaking wait to do this. THank you so so much for sharing this info with us. !!!
@oddsandendsrc
2 жыл бұрын
No problem! If you have any questions, let me know.
@RcHobbySteve
2 жыл бұрын
@@oddsandendsrc I do have a question. Where can I get the servo mount you have. Was there anything different you had to do with the pan hard setup
@oddsandendsrc
2 жыл бұрын
@@RcHobbySteve look for a scx10 iii front mount servo bracket, arount 10-15 bucks on eBay or Amazon. I go over the new panhard mount in the video, I made one, but club 5 sells the servo mount and the panhard mount together if you want to do that.
@RcHobbySteve
2 жыл бұрын
@@oddsandendsrc ok cool. I’ll look into the club 5 one. I’m making a long list of parts I want to get when I buy the kit.
Great job. You don´t see that version so often. I especially like the battery box.
@oddsandendsrc
2 жыл бұрын
Thanks!
Great vid 👍
@oddsandendsrc
Жыл бұрын
Thanks!
What front links sizes did you use? Great job btw!
Just got my first 1/10 scale. scx10.2 and it came with this body (in Orange). Previous owner cut out the entire interior to accommodate the 10.2 transmission. I am currently dealing with tire rub, and facing the need to bring the front axle forward. Thank you for your informational video! Any help on how to bring that axle forward is appreciated.
@oddsandendsrc
6 ай бұрын
If you could slide the body backwards and center the front wheel and the front wheel well, then you could just extend the rear 4 links with longer ones to Center the rear axle in the rear wheel well. Trying to extend the front axle turns into a lot of complications and geometry issues with the suspension.
what size upper and lower links did you use ?
Very nice, could u pls share where u got the Rubicon decal?
@oddsandendsrc
Жыл бұрын
I made it on a Crickit vinyl cutting machine
@uniq_vidzbostonmass25
Жыл бұрын
@@oddsandendsrc that’s very creative, thanks for sharing w/ us!
The jeep “Brute” by American expedition vehicles is the real life version. Also, I have an Scx10 chassis with injora portal axles and the wheelbase is too short. Is it fairly easy to extend the wheelbase to make this work? It looks like I’ll have to move the rear shock towers back further as well
@oddsandendsrc
Жыл бұрын
If you are using the original SCX10 chassis, it will be hard to get that to work with that transmission because you will have to do a lot of cutting. All you have to do to extend the wheelbase is to put longer links on the rear
@AKTheSavage
Жыл бұрын
@@oddsandendsrc Well, once i get the trans mounted i'll either trim, or purchase a LCG transmission. Have you found many accessories specific to this body? I have found lighted mirrors that integrate well. Injora has some tubular doors that i believe would work as well.
How did you extend the wheel base? Longer links? If so which ones did you use for the front? Thanks in advance!! G
@williamstallings3969
2 жыл бұрын
Great builds!!****
@oddsandendsrc
2 жыл бұрын
I dont know how long the original links were, I bought this 10.3 chassis used with no axles or links. I ended up with 90mm links on the bottom front and a 85mm link on the top front. I used the rc4wd medium length rod ends with those. I bought the yeah racing 6mm links off of ebay. If you run a bigger tire than I did, (105mm) you will need to extend it further.
this body is compatible in traxxas trx 4 sport ?? sorry my ingles
@oddsandendsrc
Жыл бұрын
I have not personally done one, but I'm sure it could be done with some trimming
hard to compare lexan and hardbody that way.
@oddsandendsrc
2 жыл бұрын
I enjoy building both, but this is a decent deal for a prepainted body.