Glad to see you post again, thought maybe High School preparation was taking all your time and money 😅!

@keeganhache6667

11 ай бұрын

No thats easy prep lol

Good info and well presented. Answered most questions on these carbs

@keeganhache6667

11 ай бұрын

Appreciate it

The V2 has my interest completely peaked!! I'm still waiting to find a video that someone does fully modify one that's so extreme that it sets the standard to the common question asked....... "but why?"

@keeganhache6667

11 ай бұрын

V2 what? Phantom or bt100/ yd100 you gotta be more in depth

Thanks for the video 📹 great information 👍 😀. You the man!

@keeganhache6667

11 ай бұрын

Yessir you have been making awesome videos too!

@grendelsgarage9723

11 ай бұрын

@keeganhache6667 thank you so much! It's a great hobby and I enjoy the community 😊. Keep them coming. I'm always learning something new!

Very informative. Thanks !!

@keeganhache6667

11 ай бұрын

Thanks

Nice work bro

@keeganhache6667

11 ай бұрын

Thanks little evil ride safe

TBH your flow issue with the bofeng would likely be made less severe if your fuel line didn't twist and sit parallel with the ground. (don't get me wrong, I appreciate that your frame style and tank outlet are to blame in this case, not you). IMO the Bofeng was designed with top mounted conversion kit tanks in mind, as I noticed that setting a minimal length line with as much vertical drop as possible (especially near the carb intake for obvious reasons!) alleviated all flow issues and resulted in surprisingly great performance across the entire power band. (especially considering that I'm just running a not yet broken in China Doll unit). I appreciate that because you're running an integrated tank frame, the practicality of trying to achieve a vertical drop fuel line is...well, not that possible, at a glance. You seem to have the rare but enviable issue of having a good enough frame setup that the carb just isn't suited to it. Using a quad carb was a damn smart move, I might have to look into them myself, because I'll admit those bofeng jets are..kinda hilariously oversized, as you say, haha.

Cool vid bro💯

@keeganhache6667

11 ай бұрын

Thanks boss 💪

Listen this guy he hnow what he talking about congrast and you said nice advice

Best jeting is you have to look at the spark plug needs to be on a light brownish color for better performance. The samler the carb the better for low and meed power.

KEEGAN. going to eat pizza and watch this video.

@keeganhache6667

11 ай бұрын

Yes man gotta be eating while watching KZread videos it’s a given

Nice video

If you can't weld or don't have a welder. You can still make a nice all aluminum carb. intake, using propane/Mapp gas torch, clean stainless steel wire prep brush & those alumni-weld rods. That can weld small aluminum pieces together. Harbor ⚓ Freight sells em or you can order em online. If you can't get the hang of welding with them to make an air tight seal. You only have to weld it good enough to bond together. Then use JB weld to fill in the gaps & make it air tight.

@keeganhache6667

11 ай бұрын

Right on that’s my first time welding lol no pin holes I shined a flashlight and saw none

@michaelbrinks8089

11 ай бұрын

@@keeganhache6667 Good Deal & good video. Some mineralli videos would be nice. At first I wanted to do a mineralli but now want a 4 stroke instead. I noticed many places stopped selling the 79cc 4 stroke kits. I did see a 100cc 4 stroke kit for $290 that looked decent (I think?) only 3.5hp but with upgrades can easily get 6 -9-12 hp. Or a 125cc pit bike engine with semi auto gearbox for similar price. My next build I wanna do a diy Phatmoto style bike with stronger steel frame. That's reliable, can climb hills & cruise along safely at 40mph for miles without overheating.

Any plans to fabricate modifications to bikeberry's new V2 100cc iron sleved engine?

@keeganhache6667

11 ай бұрын

Nope

Nice 👍🏾 job

@keeganhache6667

11 ай бұрын

Thanks

Thanks Keegan

@keeganhache6667

11 ай бұрын

No problem bro

Thanks bud

Nice viddeo and the jet people need is depend the altitude you city

It’s a good carb for the case reed

Great video man! Any exhaust you would recommend that flows good and quiet so I can drive around the neighborhood? I know it is kind of impossible to have a high flowing exhaust and at the same time quiet, maybe the regular expansion chamber with the silencer or muffler at the end is what I am thinking. Let me know of one if you can lol!

@keeganhache6667

11 ай бұрын

Yeah the mz65 clone with a 22mm moped silencer. Then use 1 inch inner diameter heater hose and 2 clamps to keep it all together. I just got the cr80 that’s gonna be super loud because it’s from a dirt bike

@IngenTechNational

11 ай бұрын

@@keeganhache6667 Alright cool, Thanks man! Ignore that hater in the comments lol.

i have a 69cc skyhawk build. upgraded cdi, compression cnc head, big boost chamber exhaust, etc. do you think it could handle the PWK21?

@keeganhache6667

8 ай бұрын

Try a pz19

opinion on the Zeda 80cc performance kit with the dio reed valve and the oko shabang?

@keeganhache6667

11 ай бұрын

Big no it’s not well matched to that engine a g2 reed with a vm18 or a pz20 would do much better better yet park that with a mz65 pipe or a mx pipe and some light port work, 36tooth sprocket boom! Fast bike sometimes it’s simple not to mention tuning goes a long way

@dylkloud

11 ай бұрын

Thank you!!!!!!@@keeganhache6667

IV tried running a filter and it kills the power so bad . I'll take the chance of scratching the cylinder and stuff there cheap to replace and for me it's worth the extra power but I'm normally on clean pavement. But sometimes on dirt roads but I also put a half of a license plate on the seat tube to block the stuff getting kicked up from the tire works great in the rain doesn't suck up water and mix with the oil in the crankcase now

@keeganhache6667

11 ай бұрын

Like I said some people can get away with no running it and on something you don’t really care about sure it’s okay but on a engine with so much time into not worth getting dirt inside. Fenders to help to keep sole debris out

I just asked questions in a group past two days on all this..but nobody told me why I'm getting so much fuel blowing back into the air cleaner . I'm running a HP with a 65 jet. And I think I have a air leak on manifold. I'm redoing the surfaces so they mate better.

@keeganhache6667

11 ай бұрын

Shouldn’t really have to do with a air leak sounds like you have a stock piston port setup and a little amont is very normal

@jamiestevens1239

11 ай бұрын

@@keeganhache6667 yeah it's all stock except carb and aluminum head and exhaust. Just gonna spray out filter with carb cleaner. Thanks for answering.

Hey bud great informational vid. Where was this vid when I had my huge OKO carb on my china doll? And going nowhere quick or should I say slow...

@keeganhache6667

10 ай бұрын

I saw your videos the bikes go fast my man you got any vertical Minnarelli top ends kicking around?

@jmrides777

10 ай бұрын

Glad you like the vids. My Minarelli had to be honed out due to damage from a cheap piston. Going to see if I can hone it out enough to support a 47.6mm stage 6 Nikosil piston. Let's keep in touch and maybe make an action vid before it gets to cold. @@keeganhache6667

@keeganhache6667

10 ай бұрын

@@jmrides777 yeah man hit me up on Facebook messenger

With my bofeng card n how I'm ported I run a 75 may check how 80 runs

Thou shall not hold the Gate Shut , Horizontal sounds Nice, Set them Free 👽👍🏻✨

@keeganhache6667

11 ай бұрын

Lol true words brother I hate guys who hate keep and don’t help others

Which part of Nova Scotia you in bud? I'm in New Glasgow?

@keeganhache6667

10 ай бұрын

Bridgewater

I can never find a 32mm boot or intake manafold

Do you run rag joint sprocket on the minarelli??

@keeganhache6667

11 ай бұрын

No the wheel has a built in hub for sprocket

@damnthiccassboye7138

11 ай бұрын

@@keeganhache6667 ohh thats a gemini?

@keeganhache6667

11 ай бұрын

@@damnthiccassboye7138 just a bbr rim

I fixed that HP carb I just started drilling holes

You need to drill the whole 1 mm the case valum doesn’t have that much suction It will rev extremely fast but it will idle on certain bills I built 4 yd100 70 cc Zuma and a Nine port euro cylinder that cylinder got some fucking peep I do not recommend Jack shaft it lifts up every gear

What do you mean lean out. Does that mean it died at top end

@keeganhache6667

7 ай бұрын

Mine has never cold seized but some guys use really small carbs on minnarelli builds and seize the top end

@joshuamoon8442

7 ай бұрын

@@keeganhache6667 no I'm not talking about seizing unless that's what it's called but it doesn't lock up it just dies for a second and starts back up at a lower rpm.

@SLAYJUCE

5 ай бұрын

go to two stroke stuffing haha his videos are worth watching... a lean mix means more air than fuel@@joshuamoon8442

hellow i am brazilian

The thing i hate about this engine is you cant find an exhaust without welding it and i cant weld....

@keeganhache6667

6 ай бұрын

Well then your probably not experienced yet to build one they are very picky about tuning

@danajett

2 ай бұрын

@@keeganhache6667well months later and I did the total opposite I bought a Athena Minarelli and it wasn’t cheap, so with that being said can you tell me what cdi and carb to use?