😂😂😂 this was like watching driving Miss Daisy!!

@JMB676

5 ай бұрын

lol, thanks and I agree that some parts are to slow but hey , it’s bett make it home today safe and run it hard tomorrow

Zoom zoom zoom that bike is fast Johnny that bike is sick speed is happiness thank you again for the video brother

its like watching dumb and dumber

@JMB676

5 ай бұрын

Thanks, I take that as a compliment.

Lol what a pleasant ride . The next time that you try to weld some pipe , measure the inside diameter and put some solid bar in there to support the fragile weld .

@JMB676

5 ай бұрын

Well that’s a good idea for pipes that connect in that way but this bar sits inside of angle cut like a hole saw does a 45 on a pipe in a cage, not sure what that joint is called but that’s what it was. But the main thing is I tried to keep a continuous weld going and it just blew through constantly since the welder I have is less then quantity and I have VERY limited experience with no actual tutelage. Either way it doesn’t sway me and I’ll be trying to fix them in next Video , your know which one cause I melt my camera In it and you see me Welding’s it too so that kinda makes it obvious.

I think Benny is a pretty good guy for putting-up with your crap ! No , he didn't get hit by the car , but he is NOT the cause of the handlebars breaking . The bars are meant to be pulled up on while you push down on the pedal , hard , very hard .Those bars were going to fail, period .You should thank Benny for saving your A_ _ _ Butt !

@JMB676

5 ай бұрын

lol yeah that sound exactly right. He definitely puts up with a lot from me.

@MotorizedChuck

5 ай бұрын

Just my opinion but an unconfident driver isn't relaxed and therefore will be doing ugly things with the bars and excessive pressure on the peddles. That's my personal learning exp anyway lol 😆

@JMB676

5 ай бұрын

@@MotorizedChuck yeah I mean there’s no doubt Benny is a good dude and have my back (cough as long as it’s not dangerous like a fight cough lol) in most situations. It’s just I have known anger issues I have been working on for years and have done very well controlling and Benny has a condition that I don’t know the technical name of (you could hear it coming in a bit when he got upset when I was yelling about not going after the car) I just call him an idiot. But I know his issue and he knows mine and shortly after this video was recorded we talked and I told him I needed some time apart cause as much as I love him he REALLY pushes my buttons with just the dumb stuff of me feeling like I need to police him constantly and his constant clumsiness of breaking every freaking thing he gets near, never intentionally just he manages too though. So I told him we still boys obviously but me constantly yelling at him (cause literally there’s nobody else that sets me off like he did) just isn’t fair to him or me. So we just tried to spend less time together for now but still talk n stuff n he’s still in the comments and I still got his bike here so come spring or maybe sooner we will be riding again and chillin with the bikes cause it really is a blessing to have your boy riding with you but to stressful when he’s riding my bike knowing what I know now.

@MotorizedChuck

5 ай бұрын

Yea well Johnny, I would have been bent around the axle about it too. And your not the only 1 that got pissed about a lack of action. I'm just older but still have a similar temper. Likely more controlled but have to express myself. It's safer than holding it in. For others lol!! I suggest you get him to get and prep himself a backup bicycle for; strange encounters of an anomaly time. Wheels trued, axles done and tires spare to driving bike

Camera work is exceptional great editing too

@JMB676

2 ай бұрын

Thanks I do it all on my phone and it’s kinda hard but I’m tryin to get better at it and make it fun.

Last night was heavy. Lmao. Thanks for sharing, Johnnie.

If you know Benny's IQ level and you go ahead and let him ride your bike. What does that say about your IQ level Jonnie?........jus sayin bud, jus sayin.

@davidprice5350

5 ай бұрын

I agree 👍 one can't weld the other one can't ride that big truck was going run over him 😂

@JMB676

5 ай бұрын

Agreed

🤣 fun times... A Treatland PBHG 2t carb w7 needle pilot and main jets kit... 7/8" hose for a turbo and your carburetor troubles are done

It would be fun to actually be able to ride with some1 here in Florida.

@JMB676

5 ай бұрын

I feel you bro, it’s nice having someone to ride with.

And your cruise speed ave is 45? That's awesome 👍

@JMB676

5 ай бұрын

That speed gos I put up wasn’t from that ride. It was from a cruise I put up in shorts after I broke it in well. But I wanted to show how high it revs cause that’s a crazy speed to hit on a 26inch tire and a 44 tooth sprocket. It’s gotta be somewhere around 11k rpms. Crazy.

@MotorizedChuck

5 ай бұрын

I just fired up a Zeda bottom end with a 50mm 1 piece cyl. Only did deburring, polish exhaust, (after straightening, same intake) and roughed up intake a bit. Gasket match. Switz Cruz 26" with a 44t.

@JMB676

5 ай бұрын

@@MotorizedChuck that sounds like a very solid build, is this your first build of many or next of many.

New Jursey

You want real power get yourself a few avenger cylinders and throw them yd100s out the window 😂

@JMB676

5 ай бұрын

lol, 😆

@JMB676

5 ай бұрын

You can’t honestly think that the avenger is better then a ported yd100. I mean in the end yes more displacement will be stronger but if I got an avenger I would port it and I don’t find any Renato port one of them when I think the cdh110 is better cause it’s a steel sleeve. Once you port a motor you can get pretty much whatever power you a want out of it. But that’s my opinion too. Of course if you’re buying I’ll throw it out right now lol.

LOL

@JMB676

3 ай бұрын

Yeah I think it’s something to laugh about now

Yup lying 😢 If he didn't lie about it he would be worth teaching to ride. Stop and start, lean the bike, only the left foot down, bring the right pedal up ready to take off and he stays on the seat. I watched closely, he puts both feed down every stop! Even worse he didn't follow previous instruction. Broken handle handlebar = core sample😮 There is something wrong with him! Is he stoned! Tell him a 70 year old women can ride better than him, true dat. Too bad you weren't in my area, I would ride with you and I have my own bikes 😁👍

@JMB676

5 ай бұрын

Yea there’s a bunch of basic stuff that’s just off with the ride I agree. But I go easy cause there is something wrong that I don’t know the technical name of it to do with his brain and stuff. Also why I still keep trying to cause I know it’s not necessarily on purpose just seems like it cause it happens so often and to me and others it just seems like very simple stupid mistakes that keep happening but in the end there’s a mental block and he’s a very genuine dude through thick and thin. I have anger issues I have worked on for years and got very good at controlling but being honest he brings it out crazy fast kinda like road rage still does. Basically stupidity or dumb mistakes are what gets me furious and he’s full of them. So we just chill a lil less, at least till spring for now.

Big gay Benny just caulking over programs relentlessly

@JMB676

5 ай бұрын

Lol

I'M A BETTER RIDER THAN OLE BENNY

You know what man I don't think you treated your buddy appropriately yes he may be a little troublesome I have the same problem also I have a buddy that is almost a little same way. But I don't talk to him like that. I'll tell you what man that kind of just makes me want to unsubscribe thanks for all your content but that did it for me goodbye. Have a nice life.

@joshuamoon8442

5 ай бұрын

By the way in the future if you want to keep continuing to get subscribers I would either leave that content out or don't do it at all I don't think a lot of people appreciated that.

@JMB676

5 ай бұрын

Well this is real life and to be honest you don’t know everything that goes on that’s not recorded. Your free to your wrong opinion but do you I’ll live another day. Thanks.

I'm not defending Benny, he is an idiot! However. that weld on mild steel looked pretty sketchy.

@JMB676

5 ай бұрын

Have no doubt I’m not saying the weld was the best as I have said I am NOT a good welder. However I rode the bike with those bars since new for over a year and never had a problem. It was very hard to weld it as I kept blowing through since my welder has melt metal mode or blow through in a second modes only to choice from. So there’s a learning curve for sure. But the long of the short is the bike is just way to big for him and because of that the way he got up on the bike he pushed down and then pushed forward to sit back and pedal, so it was basically up and down and I had no other gusset for support and the way the weld seem was just happened to be in the perfect spot to be bend and affected by the way he got up and down and pedaled. So if it had been just ; hey the handlebars are cracking I would have just been like damn this blows cause I literally had that fear for like the first few months about it happening to them but just never did. So I by now just never thought about it being an issue again but when he said he got side swiped and that’s how they broke, well that’s an entirely different thing and had me all messed cause I thought it was some idiot driving stupid, not some idiot pushing and pulling. So basically I totally agree.