Motorcycle Wheel Chock
Автокөліктер мен көлік құралдары
Motorcycle Wheel Chock
I primarly build this to use when changing the out the fluids in the motorcycle. I have been using a scissor style motorcycle lift, but was having trouble getting a drain pan to fit to catch the used oil. I stumbled across a KZreadr, Willy Coletrain. He made a 3 part video on building a nice motorcycle stand. Below is a link to part 1 of his motorcycle wheel chock.
• Homemade Motorcycle St...
I wanted to also make a motorcycle wheel chock, so I gathered up some scrap wood that I had lying around from other projects and came up with this. The scrape wood that I had in the shed was just the rights size. I used pocket hole screws and gorilla glue to secure the wood together. I used a Kreg Jig to make the pocket holes. Please measure the width of your front tire to determine the width of your tire chock.
Пікірлер: 21
Time is money 💰..... I'll just buy one thanks 😆
Thank you for this design. I built one per your design except I used 2x8s where you used 2x6s because my fender isn't as low. I thought it would add even more stability. My isn't as refined as yours, but works like a champ. Thanks man.
Thanks. Making it today!
Good idea
I'm looking at it informally.^^&
Super video! I was looking to build one (no clue how) since I want one for the same purposes: General fluid changes/checking. Thanks!!
@alivan7334
2 жыл бұрын
You probably dont give a shit but does any of you know a tool to get back into an instagram account..? I somehow lost the account password. I appreciate any tricks you can give me.
@nelsonsamir3611
2 жыл бұрын
@Ali Van Instablaster =)
@alivan7334
2 жыл бұрын
@Nelson Samir Thanks for your reply. I found the site on google and Im trying it out atm. I see it takes quite some time so I will reply here later with my results.
@alivan7334
2 жыл бұрын
@Nelson Samir It worked and I finally got access to my account again. I'm so happy! Thank you so much, you really help me out!
@nelsonsamir3611
2 жыл бұрын
@Ali Van Glad I could help xD
👍
Do the measurements really matter?
@cheapjoker3321
11 ай бұрын
No, these were just what I used that I was comfortable with to stand my bike up with.
We are looking for a way to hold our motorcycles on a moving truck fr VT to SC I wonder if this would work..we cant bolt it down
@cheapjoker3321
3 жыл бұрын
Sue crayz I don’t think this would work. Just standing up there seems to be a lot of movement when putting light pressure on the bike, so I can’t imagine what would happen on a truck.
Nice and all for say $500 bike but you've got $20k+ one, just spend another $300 and buy Condor or Wheelchuck brand one, proven, well made and safe.
The wood has to be below the rotor and I assume that only the tire up to the rotor is really clamped into the wood.
@cheapjoker3321
9 ай бұрын
Yes, the wood is below the rotor. It is slightly higher then the tire, but as you can see I had to remove a little bit to accommodate for the fender.
@erwinerwin1245
9 ай бұрын
Thanks for your reply and video. I am going to make one also @@cheapjoker3321