Thanks nice video saved me grief. Am 72 bought 1st bike 99 Road King and rebuilding Triple Tree. U RAwesome.

@HouseMadeUS

10 ай бұрын

Thank you! 🙏🏼🙏🏼

Bought removal tool based on video for Harley Sportster and didn't fit due to taper in frame. If you trim/grind the bottom side of the tool at an angle (each side) but still leave a few mm of the lip and it'll fit snug in behind race. From there just knock it out with punch or drift. Not ideal especially if you just bought tool new, but if that's the tool you got that's easiest way to do it.

That's a great tool would work on some jobs on cars too very nice thanks

@HouseMadeUS

5 жыл бұрын

+Anthoney King - you’re welcome Anthoney. This job would be a bear without it! Definitely one for the tool drawer.

Use angle grinder cut a thin lip around the edge should fit in then tool may only be good 4 that clearance...

It’s the no shoes for me

It’s not working on my Harley, no flange to grab.

Side question, what garage cabinets are those behind you?

@HouseMadeUS

3 жыл бұрын

Seville Classics UltraHD Full Door Storage Cabinet www.samsclub.com/sams/a/prod1490064.ip

@big_air_jer9768

3 жыл бұрын

@@HouseMadeUS thanks!

U didn't put the new ones back in... cmon man... gotta do a complete job.

This is the most frustrating tool I have ever used! The bearing races on my bike has no edge or lip to get up under. So I just have to tighten the tool as HARD as I can. But the thing just jumps out.

@darryltarrayo5405

8 ай бұрын

Hi. Can i have an update on how you remove the bearing races.

@Arizona_rider

3 ай бұрын

@@darryltarrayo5405heat…

would worn out Races cause death wobble ? my Road Glide has death wobble...

@HouseMadeUS

3 жыл бұрын

That’s most likely due to a bad wheel bearing.

@kevinbergen4309

3 жыл бұрын

Or swingarm bearings. Be careful out there bro.

@joalvarez6252

3 жыл бұрын

Im also hearing that adding a brace on the forks can help with that.

@stevepembi5869

3 жыл бұрын

Update...the dealership said it may be the front tire, I had my doubts because the tire was new 🤷🏼‍♂️ but they warranty it and replaced the tire and holy shit ! It fixed it...rides like a dream 👍🏻

👍

will this tool work on removing tapered races?

@HouseMadeUS

4 жыл бұрын

+Ron c Shaw - yes, I’ve done it many times.

Did you get out of the boat restoring?

@HouseMadeUS

5 жыл бұрын

+Phillip Brame - yes. No room for a big boat at my new house. Smaller projects for now. Some day I’ll restore a sailboat. :)

I rode the hell out of my fat boy so my races came out easy lol

You have gloves on, and an apron. But your barefoot and pantless. Wtf 😂

@HouseMadeUS

Жыл бұрын

That's how I roll. 🤠

Using this exact tool and still can't get this thing out.

@HouseMadeUS

4 жыл бұрын

Are you using a drift? Any luck?

Only do this job with proper shoes or boots on. This even applies to hipsters, beat necks, Zoomers, Boomers, GenX'ers, Goths, or whatever else you may identify as. You only get one set of toes. They don't grow back. Good vid otherwise.

@HouseMadeUS

2 жыл бұрын

Steel toes every day now. 👍🏻👍🏻👍🏻

@hawkdsl

2 жыл бұрын

@@HouseMadeUS Good deal. :)