Пікірлер

• 
  @davidk1061Күн бұрын

  I cannot find where you explain how the fan is wired into the power source?

• 
  @nickaschenbecker9882Күн бұрын

  You kinda destroyed the geometry of the thing, rounding over all the details. Power tools are great because they do things fast. They're also terrible because they screw things up fast. Should've used sanding blocks.

• 
  @HouseMadeUS3 сағат бұрын

  I disagree

• 
  @yooperpilot2 күн бұрын

  I just pulled my DD-750x out of the box and, in an effort to try something new, I decided to read the instructions. That led me to KZread for the manufacturers video and ultimately to here. This is a super hands-on, in the workshop, practical application video! I, too, recently did the math and decided I've spent just about enough on drill bits over the past [insert number] years. Fortunately, like most of the DIYers who have, or will be, watching this, I don't have the inner strength to throw away perfectly dull drill bits - even ones that snapped off just above the drill chuck (no, I won't try sharpening those - but they help tell the story). Anyway, thanks for the boost of confidence, Brian. I'm off to resurrect the contents of my shoebox and prove to myself that it's ok keep some things that appear beyond the help of superglue and duct tape!

• 
  @HouseMadeUS2 күн бұрын

  Excellent! Glad it helped! 👊🏻👊🏻👊🏻

• 
  @Memo-nd6fj2 күн бұрын

  I replaced the transom same way you did on my 1987 Bayliner. I used long drill bits to remove most of the wood in the transom along with some large heavy screwdrivers to scrape the old glued on wood from the fiberglass walls. Designed a long hose to reach on down and vacuum out any residual wood and scraps. The transom was as hard as a rock and lasted the rest of the lifetime of that boat which was decades before it was junked. DIY not to hard. Going to redo the transom on my 1983 V20 that I just started worked on.

• 
  @augiedad543 күн бұрын

  Very down to earth explanation of the alignment process. Good work!

• 
  @HouseMadeUS2 күн бұрын

  - Thank you! 🧨🧨🧨

• 
  @ed.sol.crafts4 күн бұрын

  That's awesome! Thanks for sharing!

• 
  @HouseMadeUS2 күн бұрын

  Thanks Ed!! 👊🏻👊🏻👊🏻

• 
  @adairjanney71094 күн бұрын

  Yeah but there all magnetized now arent they

• 
  @HouseMadeUS2 күн бұрын

  Only when you use them during the day.

• 
  @frostizz20724 күн бұрын

  I’ve been using this throw for 2 years pancakes every time wondering if this will work for 8ft thinking of getting one

• 
  @HouseMadeUS2 күн бұрын

  I have a 10ft and it doesn't work with one that big. Maybe 8ft might work.

• 
  @frostizz20722 күн бұрын

  @@HouseMadeUS alright so I just bough a 8 foot and the throw works preety well it’s harder to get distance but I can still get a decent circle

• 
  @The_Unobtainium5 күн бұрын

  😂😂😂😂The guy got crazy because he found milling machine isnessential in the workshop😂😂😂

• 
  @HouseMadeUS5 күн бұрын

  What

• 
  @muwahh986 күн бұрын

  I wonder if the rectified dc part of the pc power supply could just be used directly into a dc motor controller

• 
  @kennethbellotte86786 күн бұрын

  Assembling

• 
  @HouseMadeUS6 күн бұрын

  The two words are synonymous

• 
  @hainesknives6 күн бұрын

  All I hear is Wierd Al's, "Gump" 😅

• 
  @HouseMadeUS6 күн бұрын

  Hahahaha yep

• 
  @jeremyfatfab7 күн бұрын

  In the into you mention a separt video on how to build the ribbon burner, Is that video out? Killer vids, thanks for all the info!

• 
  @adelblanchet7 күн бұрын

  Love this song ❤

• 
  @louisvanrheedevanoudtshoor67577 күн бұрын

  Brilliant!

• 
  @gilbertmckown61618 күн бұрын

  While the copper and brass are easy to form and hammer texture, does anyone have any tips on forming and hammer texturing the stainless version? I have to hit twice as hard just to get the hammer texture i like out of the stainless scoop and its murder when your making 20 in a row.

• 
  @HouseMadeUS8 күн бұрын

  Apply heat to the stainless and that makes it more malleable

• 
  @jasonscott78038 күн бұрын

  👍✌️⚒️

• 
  @9stripes_10 күн бұрын

  My dad used to bump this whole album all the time when i was little. Good times man

• 
  @wyattlouisjane758411 күн бұрын

  I've built a couple of grinders down here at the bottom of the world and had them finished off before I found your channel. Wish I'd found it sooner, your video's are awesome thanks. This build looks solid and amazing, very similar to mine, I've never bought your design but refer people to you if they ask about the grinders. People are building them down here in NZ so I've been told. Anyway thanks for all your hard work and content, love your work.

• 
  @benneisam11 күн бұрын

  Great song. Love the hammer texture

• 
  @KnuckleBuster11 күн бұрын

  You got lucky

• 
  @ia698011 күн бұрын

  How do u lift that motor?

• 
  @I-wonder-what-he-saw12 күн бұрын

  Type shi

• 
  @way1234ne12 күн бұрын

  thanks for the tips!

• 
  @davidscadlock556912 күн бұрын

  I’ll be there!! See you then!!

• 
  @jeffreymiller970613 күн бұрын

  THIS could be my Best Birthday ever!!!!!!

• 
  @HouseMadeUS13 күн бұрын

  Yussss it could!

• 
  @jeffreymiller970613 күн бұрын

  @HouseMadeUS ringing in the big 50 the proper way.

• 
  @chrisxl515213 күн бұрын

  I always remember Weird Al Yankoviches parody version called "Gump" before I remember lump the original lol

• 
  @elijahfjerkenstad442213 күн бұрын

  Will it be live streamed?

• 
  @HouseMadeUS13 күн бұрын

  I do not think so unfortunately

• 
  @fxnepilogue13 күн бұрын

  Hopefully they record some of it and post it for content!! 👍🏻👍🏻 I’m still using my revolution grinder as often as I can and it runs as well as it did when I built it in May of 2020

• 
  @user-be2zu7ld9e13 күн бұрын

  final design is unclear, but, IMHO, it is easier to 3d print multiple pieces, combine them into desired shape of the future "combustion chamber" of the forge, and cast that mulripart piece into refractory.

• 
  @way1234ne13 күн бұрын

  Recommended motor I purchased from Amazon shaft is too large for the 7" drive wheel. Brian, can you tell me what I should do? Can you enlarge opening for fit my shaft? Many thanks!

• 
  @HouseMadeUS13 күн бұрын

  There is a small cover over that shaft, all you have to do is pull it off. 😁👍🏻 Easy!

• 
  @way1234ne13 күн бұрын

  @@HouseMadeUS thanks!! Can’t believe I missed that!!

• 
  @germanfamily583813 күн бұрын

  Pizza oven in the future :)

• 
  @benneisam13 күн бұрын

  This song sounds like my childhood.

• 
  @HouseMadeUS13 күн бұрын

  Haha! Yes

• 
  @jakequinsey751113 күн бұрын

  Honestly get rid of the rust and clear coat the vise, all those scratches and dings are a story

• 
  @HouseMadeUS13 күн бұрын

  You're right. I left it as is. 👊🏻

• 
  @Denise-wd3kr13 күн бұрын

  Price??

• 
  @Marckusmtrmth13 күн бұрын

  Nice. Always love the song Lump!

• 
  @jetski77814 күн бұрын

  what is that piece for, the lil door you stick the metal through

• 
  @HouseMadeUS14 күн бұрын

  Yes this is the entrance into the forge

• 
  @user-ds6ur2og5p13 күн бұрын

  @@HouseMadeUSis the just concrete (cement)? Won’t that expand with the high temp and explode? Asking for a friend.

• 
  @gatorcreekcustomknives32113 күн бұрын

  @@user-ds6ur2og5pit’s a high temperature castable refractory cement, probably kastolite 30. So it’s rated to 3000 f.

• 
  @eusudjeje14 күн бұрын

  yeah. change the title to 2% 3d printed belt grinder.

• 
  @bigdbigd40414 күн бұрын

  Where is the reverse option?

• 
  @HouseMadeUS14 күн бұрын

  You have to purchase a separate switch to make that happen with this VFD.

• 
  @bigdbigd40414 күн бұрын

  @@HouseMadeUS thank you.

• 
  @bigdbigd40414 күн бұрын

  Is the switch difficult to install into the VFD?

• 
  @jasonscott780314 күн бұрын

  Great information.👍✌️⚒️

• 
  @HouseMadeUS14 күн бұрын

  - Thank you! 🚀🚀🚀

• 
  @davmanlop33315 күн бұрын

  Could of just used two nuts and would of been able to take it off with welding

• 
  @hciii741918 күн бұрын

  You placed the hook right in front of the door of the welder.

• 
  @HouseMadeUS16 күн бұрын

  Yeah, I cut that off

• 
  @ThompsonGrant19 күн бұрын

  I don't understand how the gate valve works. When you start to close the valve wouldn't that just cause the air to speed up not produce less air flow. I know your system somehow works but if you could explain it that would be great.

• 
  @HouseMadeUS19 күн бұрын

  Air works like water, so the gate valve slows the flow, just like water. In fact air can be measured using water column.

• 
  @kjbigslim19 күн бұрын

  fyi. I plasma cut your rev 5 plates recently, like last week. Your hinge plates (3/8" material) have the 3/4" pivot holes drawn at .77. Seemed all the other holes were drawn to size, any particular reason for this? I found that too large to pivot accurately (lots of slop in the 3/4" hinge bolt), and my plasma table is set to offset holes smaller than they really are. I would've emailed, but I couldn't find an address on your site

• 
  @HouseMadeUS19 күн бұрын

  You can adjust the kerf on your plasma table to adjust for tighter tolerances. We use .77 due to being cut by laser and our bolts have a zinc coating so we require that small bit there. Easy enough fix is to just tighten that big axle bolt more and it will cinch up nicely. Thank you.

• 
  @kjbigslim17 күн бұрын

  @@HouseMadeUS aren't co2 lasers more accurate than plasma? My bolts also have the zinc coating. Your bolts in the video appear to have an accurate fit. Like I said. All the other holes were fine with my kerf offsets in place. It's not really a problem. I plan to re-cut them and mill them to size. Just thought you'd like to know

• 
  @Rstifleable20 күн бұрын

  You sound like you know what the hell you’re talking about. So let me ask you a question. I’m trying to set up a 1940’s drill press so I can drill steel and wood. I have a 1/2hp 3 phase motor I want to use. Here’s the question: if I have a converter which can step up or down voltage do I also need a VFD?

• 
  @way1234ne24 күн бұрын

  does it matter if the black wire is on left and white wire is on right of male 50 amp 250 volt plug? That was on diagram that came with plug vs what's on this video???

• 
  @HouseMadeUS23 күн бұрын

  They are interchangeable, however you may need to swap them if your drive wheel is going the wrong way.

• 
  @way1234ne23 күн бұрын

  @@HouseMadeUS Thanks for the reply. I left the black on left and white on right. Finished the VFD wiring and motor wiring. Plugged into 220 and motor spun counter clockwise! Think I'm set for now! Great instructions on video. Just waiting on Gen 5 Revolution kit that seems hung up at Fort Myers post office for last 3 or 4 day? Thanks again for your reply!

• 
  @HouseMadeUS23 күн бұрын

  Forward should be counterclockwise actually so you will want to swap those wires. Your kit is on the way but with the Memorial Day holiday tracking is lax. All good my man, thank you for your business. 👊🏻

• 
  @goodnight75024 күн бұрын

  Hey new subscriber just can from your treadmill motor video. I was wondering if you could use a treadmill motor in reverse to generate power if you hooked it up to a bike. I have a stationary bike and i have figured almost everything out but i don't know how to control the power generation without gears on the bike. I just have an old exercise bike that just uses a friction pad to slow down the flywheel. I would like to be able to turn the resistance up or down on the DC motor to generate more or less power making it easier or harder to Pedal . Any chance you can help with this. Even just the smallest tip to get me in the right direction would be huge. Your videos are great keep them coming

• 
  @HouseMadeUS23 күн бұрын

  Unfortunately I do not have any info on generating electricity. I just know how to make motors move. 😁

• 
  @goodnight75023 күн бұрын

  All good, thanks for the fast reply. From what i understand most treadmill motors can be run backwards to generate DC power. My search continues

• 
  @denniscasey496724 күн бұрын

  DID C.A.D. TELL YOU THAT YOUR HOOKWELD IN FRONT OF HOBART DOOR BLOCK OF SPOOL CHANGE OR WHAT EVER , THE WElder use the never ending spools of WIRE ❓

• 
  @HouseMadeUS24 күн бұрын

  I removed the hook after I realized that was the case. Works great.👍🏻

• 
  @darinmullins477025 күн бұрын

  a wok would be cool with a hollow handle at 6 OCLOCK , a C handel at 12 oclock and a pour spout at 9 .

• 
  @HouseMadeUS24 күн бұрын

  That would be great!

• 
  @qzwqsy25 күн бұрын

  Very nice, how would you set up a switch to have forward & reverse?

• 
  @stirredpudding26 күн бұрын

  I would describe this video with one word... Flaccid. Seriously, I am confused. Are you offering some kind of hammer kit? Some kind of guide to building a hammer? Advocating for the purchase of your equipment to build a hammer?

• 
  @HouseMadeUS26 күн бұрын

  It's a video showing off the handmade hammer we make. You can buy the hammer, but there isn't many left so hurry.