Motorcycle turntable made of plywood, materials cost $253
Жүктеу.....
Пікірлер: 39
@andykrask31842 жыл бұрын
extra points for paint theme. Great job.
@BigBlok5022 жыл бұрын
Almost looks like an aircraft carrier Flight Deck, good job on it.
@valley21187 жыл бұрын
Perfect as I simply want to ride up and ride out, keeping it in up dedicated spot. Out of all that I've seen this one is the style that I'm going to make. Thanks
@sawyerramos3113 Жыл бұрын
"ok, start recording" hahahaha priceless
@pm35772 жыл бұрын
My initial thought was you’ve invented a solution to a problem that doesn’t exist. But then I saw you bike weighs 2 tons so it’s actually a very good solution to your situation.
@45eno2 жыл бұрын
It’s nice being able to 180 the bike in a the garage. I just installed the factory center stand on a NC700x and I’m able to do the same now on the smooth garage floor simple on the center stand. Balance both tires off the ground and turn it 180. Love being able to spin it for the next ride.
@christownsend76022 жыл бұрын
Really cool looking turntable, I don't have enough room to spin mine around like that though. I just use a motorcycle jack so I can spin it enough to park behind my Polaris RZR in the garage and then spin it around again so I can back out of the garage. Works for me. If my wife isn't home then I have the whole other side of the garage to use then.
@Jenuin2 жыл бұрын
This I can see why you need it compared to a smaller bike kickstand turn deal. Way smoother and safer.
@jerryjeromehawkins17122 жыл бұрын
Just too cool!! 👍🏾🇺🇸
@Alex-loc0132 жыл бұрын
He must love Top Gun
@nzbeeker16 жыл бұрын
That’s cool. I have the 1000lb Lazy Suzan bearing,,, I am going to do that...
@AzzKicker-bz1cb
2 жыл бұрын
@nzbeeker Where did you acquire a 1,000lb “lazy susan” bering???
@warntheidiotmasses71142 жыл бұрын
Good idea but those Harleys are ridiculous. I'll take a Ninja any day.
@karlkelley83532 жыл бұрын
Nice job 👍
@fraher676 жыл бұрын
Hello! Very smart construction! Is it just made of plywood or is there a steel structure underneath? Thanks for the video!
@pmacc35572 жыл бұрын
The man is a class act☺️💪🏍️👍😄😉
@ronsvt11 күн бұрын
hi, can you give a description on how you made it. Parts list? Thx.
@grantjennings319010 жыл бұрын
This looks like just what i am after for my narrow driveway. Are you willing to supply the plans / parts list so that i can also make one?
@reneflippe32862 жыл бұрын
Whatever next ! For inapt riders who should not be on the road !
@swamppifi61862 жыл бұрын
what a good idea...
@verylildre6 жыл бұрын
Any plans for this? Looks like what i need
@bigghungry7710 жыл бұрын
That's awesome! Did you build this?
@Michaelobama184
2 жыл бұрын
No
@chrissmith76692 жыл бұрын
I don’t mind having to do a push back before leaving. I would like a way to just slide it as close to the wall as possible.
@gauthmr5 жыл бұрын
I am looking to built a motorcycle turntable for my 2003 Yamaha Royal Star Venture Midnight. This looks very nice and would love to built one. Are there any plans available?
@Starch-Wreck
5 жыл бұрын
Marcel Gauthier good thing you included the color. In case the turntable only works for a 2003 Yamaha Star Royal Venture in red and doesn’t fit one in “midnight”.
@willp20422 жыл бұрын
easy peasy....smart move
@randomrides2 жыл бұрын
I want one 😁
@yellowcake24782 жыл бұрын
Sweet
@chrisbarberi41732 жыл бұрын
Where can you buy this?
@carlosc78776 жыл бұрын
can send me the sizes of the project? thanks
@Michaelobama1842 жыл бұрын
Yay
@drmrjon2 жыл бұрын
Ok, what's the point?
@XxsteamerxX7 жыл бұрын
I want to build a shed in the backyard that houses my bike and some other yard equipment. I am extremely interested in this idea. Please send me specs and any info you can provide on materials. Message me here or I can give you an email address.
@pmacc3557
2 жыл бұрын
Did you get it built?
@XxsteamerxX
2 жыл бұрын
@@pmacc3557 Nope. Never heard from the original poster. I will have to reverse engineer it from what I see here and what I know about Batmobile Lazy-Susan-type platforms.
@pmacc3557
2 жыл бұрын
@@XxsteamerxX go on , give it a try. I imagine step 1 is a shaft fixed in the vertical on a good concrete platform on top of shaft a good hefty bearing for the swivel. then the boarding - metal frame covered in wood and then at each end of sloped drive on to have some kind of mini rollers to support weight + assist in the rotation. itl be a good project and in USA ye can buy almost anything local..
Пікірлер: 39
extra points for paint theme. Great job.
Almost looks like an aircraft carrier Flight Deck, good job on it.
Perfect as I simply want to ride up and ride out, keeping it in up dedicated spot. Out of all that I've seen this one is the style that I'm going to make. Thanks
"ok, start recording" hahahaha priceless
My initial thought was you’ve invented a solution to a problem that doesn’t exist. But then I saw you bike weighs 2 tons so it’s actually a very good solution to your situation.
It’s nice being able to 180 the bike in a the garage. I just installed the factory center stand on a NC700x and I’m able to do the same now on the smooth garage floor simple on the center stand. Balance both tires off the ground and turn it 180. Love being able to spin it for the next ride.
Really cool looking turntable, I don't have enough room to spin mine around like that though. I just use a motorcycle jack so I can spin it enough to park behind my Polaris RZR in the garage and then spin it around again so I can back out of the garage. Works for me. If my wife isn't home then I have the whole other side of the garage to use then.
This I can see why you need it compared to a smaller bike kickstand turn deal. Way smoother and safer.
Just too cool!! 👍🏾🇺🇸
He must love Top Gun
That’s cool. I have the 1000lb Lazy Suzan bearing,,, I am going to do that...
@AzzKicker-bz1cb
2 жыл бұрын
@nzbeeker Where did you acquire a 1,000lb “lazy susan” bering???
Good idea but those Harleys are ridiculous. I'll take a Ninja any day.
Nice job 👍
Hello! Very smart construction! Is it just made of plywood or is there a steel structure underneath? Thanks for the video!
The man is a class act☺️💪🏍️👍😄😉
hi, can you give a description on how you made it. Parts list? Thx.
This looks like just what i am after for my narrow driveway. Are you willing to supply the plans / parts list so that i can also make one?
Whatever next ! For inapt riders who should not be on the road !
what a good idea...
Any plans for this? Looks like what i need
That's awesome! Did you build this?
@Michaelobama184
2 жыл бұрын
No
I don’t mind having to do a push back before leaving. I would like a way to just slide it as close to the wall as possible.
I am looking to built a motorcycle turntable for my 2003 Yamaha Royal Star Venture Midnight. This looks very nice and would love to built one. Are there any plans available?
@Starch-Wreck
5 жыл бұрын
Marcel Gauthier good thing you included the color. In case the turntable only works for a 2003 Yamaha Star Royal Venture in red and doesn’t fit one in “midnight”.
easy peasy....smart move
I want one 😁
Sweet
Where can you buy this?
can send me the sizes of the project? thanks
Yay
Ok, what's the point?
I want to build a shed in the backyard that houses my bike and some other yard equipment. I am extremely interested in this idea. Please send me specs and any info you can provide on materials. Message me here or I can give you an email address.
@pmacc3557
2 жыл бұрын
Did you get it built?
@XxsteamerxX
2 жыл бұрын
@@pmacc3557 Nope. Never heard from the original poster. I will have to reverse engineer it from what I see here and what I know about Batmobile Lazy-Susan-type platforms.
@pmacc3557
2 жыл бұрын
@@XxsteamerxX go on , give it a try. I imagine step 1 is a shaft fixed in the vertical on a good concrete platform on top of shaft a good hefty bearing for the swivel. then the boarding - metal frame covered in wood and then at each end of sloped drive on to have some kind of mini rollers to support weight + assist in the rotation. itl be a good project and in USA ye can buy almost anything local..
Why?