03/24/2023 this video helped me sooooo much doing this my first time I still made a ton of mistakes but I wouldn’t have been able to do it without this video!!!!

@HalfdeadRider

Жыл бұрын

I'm glad it helped mate, thanks for watching and ride safe 👍

BRILLIANT video - I'm sure this will come in handy to very many. I've got the same impact wrench and I absolutely love it!

@HalfdeadRider

5 жыл бұрын

Thanks, it's awesome you think so. That is a really good tool to have, I also bought an adaptor so it's now my drill also, no need for multiple tools 😊

Another quality video, best motorbike channel on youtube!

@HalfdeadRider

4 жыл бұрын

I don't know about that bud, but thanks for the kind words 😎👍

Brilliant how to. Will really help me in a few months. Thanks mate.

@HalfdeadRider

3 жыл бұрын

Thanks bud, glad to help 👍

Great in depth video will be very handy when i come to do mine cheers

@HalfdeadRider

5 жыл бұрын

Thanks bud, I'm glad you enjoyed it and it will be helpful too 👍

Probably should’ve watched this before I did my chain and sprocket but figured I’d check and make sure I did it right 🤣 great video bro. Biggest thing I was worried about was my new front sprocket looking different than the stock but glad my new one looks like yours

@HalfdeadRider

3 жыл бұрын

😂😂 Thanks for watching anyway 👍 Yea the stock sprockets have a rubber cushion to slightly quieten the chain, same on most bikes I think, but aftermarket almost always don't have them.

@asj12

2 жыл бұрын

It’s an interesting design to say the least. I bought two sprockets and an ek chain for my 06 ninja 650r. Have you ever had a clip master fail on you?

@HalfdeadRider

Жыл бұрын

@@asj12 Didn't see this comment originally sorry. I personally have never had a problem, but I got a little confused as to why it came with both on the larger chain for a more powerful bike. AFAM themselves contacted me as they were supposed to send me a new set last year, never did! but they said at the time that they recommend we use the other master link rather than the clip. I used it as it's a bit easier and thought "if it is there it must be ok", but now we know.

Fantastic quality video, your instruction is great.

@HalfdeadRider

4 жыл бұрын

Thanks bud, I hope it helps you to get to know your bike and save some money too.

Cracking in depth tutorial vid 👍 I would have cut my knuckles to shreds doing this 😂 Top job 👍

@HalfdeadRider

5 жыл бұрын

Thanks mate, I think this is one of very few times I did not cut myself working on a bike or car lol

Excellent video mate that should be very helpful to anyone who’s not done one before 👍

@HalfdeadRider

5 жыл бұрын

Thanks mate I hope so 👍 I hope you are doing well mate.

@BikeMates

5 жыл бұрын

Halfdead Rider yes I’m doing fine thanks mate. Getting a new bike soon video to come 👍

@HalfdeadRider

5 жыл бұрын

@@BikeMates Nice one mate, glad to hear it. I will keep an eye out for the video.

@BikeMates

5 жыл бұрын

Halfdead Rider the test ride video is up now 👍

@HalfdeadRider

5 жыл бұрын

@@BikeMates I'll open the video ready to watch while eating, food is almost ready 👍

Nice bike good video 👍🏾💯🇬🇧

@HalfdeadRider

4 жыл бұрын

Cheers buddy 👍

Thank you sir. Helped me a lot, I've the exact same bike and colours 😎. Gold and silver is nice and classy. The extra gold on the chain adds to it too.

@HalfdeadRider

Жыл бұрын

Awesome bud! thanks for watching and commenting. They are a good looking bike, great fun too 👍

Very helpful sir, thank you

@HalfdeadRider

3 жыл бұрын

Happy to help, thanks for watching my other vids too.

nice content buddy.

@HalfdeadRider

3 жыл бұрын

Thanks mate 👍

I've got a 07 same as yours I need to go thru it but she runs great I just wanna upgrade a few parts on her these vids helped me how much would u do my sprocket and chain for ??

@HalfdeadRider

3 ай бұрын

Good fun bikes, are you local to me?

awesome vid. subscribed just for the 18 year old cat :)

@HalfdeadRider

2 жыл бұрын

Thanks bud, unfortunately Tigger passed away not too long after, July 24 2019 😢

Cheers, useful. I had a very tight rear right slider, took me 4 hours today to get the wheel off. No amount of tapping with the wood block persuarder, wd40 or gt85 would work. Used an impact gun and wd40 and 30 minutes later got it free. Turns out corrosion had rusted the hub on my ER6F to the aluminium slider and the brake caliper mount bracket. What should I grease the shaft with to prevent this seizing again. Hear copper grease is a no no.

@HalfdeadRider

4 жыл бұрын

I'm glad you found it useful. Sounds quite bad, bit of a cleanup job now hey! Use an all purpose high temperature grease, copper grease is for non moving/mating surfaces to prevent them from becoming seized. Good luck getting it sorted, thanks for watching 👍

@Nordkapp65

4 жыл бұрын

@@HalfdeadRider cheers, technically these areas are non moving, but subject to temperature fluctuations, will look at the greases I have, will fit a new rear disk as the wheel is off. Plenty surface rust to clean on my 2007 model!

@HalfdeadRider

4 жыл бұрын

@@Nordkapp65 Sorry mate, I assumed by hub you meant the axle for some reason, either grease will be fine then. But on the axle, I like to put some all purpose grease. I've got my swingarm off for a refurb now, my '08 is quite bad on that, it used to be in Aberdeen before I got it and probably looked after quite well but not perfectly.

Have you ever had any issues using a quick link? I know lot of people complain about them on forums and what not and have horror stories of them falling off but I find it hard to believe without installing it the wrong way (open side forward) or not seated properly.

@HalfdeadRider

4 жыл бұрын

No, never had an issue and that is what comes with the AFAM XS ring chain, a very high quality race chain, so can't be bad. I had two on my 125 😂 👍

I would definately replace the tab locker and split pins with new ones though.

@HalfdeadRider

2 жыл бұрын

I assume you mean the lock washer for the front sprocket, you can use them at least four times, by bending at a different point each time. More times I'd possible if it's not weakened, but best to replace them when used the four times though, if not before. Split pins depends on condition really, but some do weaken and break after just one or two uses. Basically it's something to consider each time, but not necessarily something you have to replace. I always have one ready, but only use it if the old one snaps or is otherwise in bad condition.

@rickyknowles

2 жыл бұрын

@@HalfdeadRider yeah fair enough mate, great video by the way :) Just meant for there price and there importance, its worth replacing them .

@HalfdeadRider

2 жыл бұрын

As I've always been on a tight budget I've always tried to reuse where possible. As I trained and for some time worked as a mechanic in my younger days, I trust my own judgement too. Many people think in the same way you do and that's fine, a YT mechanic once replaced perfectly ok to use spark plugs, I said just clean them, inspect them, check the gaps and they'd be fine. But he also said for the price you might as well replace them, I see that as a waist of material, and money, especially as a set of iridium plugs cost £40+ for a four cylinder bike. They also can last for tens of thousands of miles, up to 100k miles in some cases. Thanks, glad you liked the video 👍

Thanks! Note that the cotter pin placement is completly wrong, check the manual

@HalfdeadRider

3 жыл бұрын

I'll take a look bud, but that's how they are generally put in (and how it was when I took it off of course). I can't think of another way other than putting it upside down lol, but I will make sure I have a look 👍

@ItsGosho

3 жыл бұрын

@@HalfdeadRider Do you know what is the size of that cotter pin, because I cant find out :) ?

@HalfdeadRider

3 жыл бұрын

@@ItsGosho No sorry, but here are all parts for this bike, the split pin is in the rear hub assembly. www.kawasakioriginalparts.com/road-bikes.html?machineid=733&year=2008&model=EX650A8F&country=GB

@ItsGosho

3 жыл бұрын

@@HalfdeadRider Thanks. It looks like it is 4.0X35

@HalfdeadRider

3 жыл бұрын

@@ItsGosho I also think I know why you feel its fitted wrong now, some people would bend one part over the end of the hub, no need as long as it solidly in place and not sticking out.

I just put the angels st on my 09 650 how did they hold up for you

@HalfdeadRider

4 жыл бұрын

Great tyres in my experience, these ones do not have a lot of miles on them yet. But when I got this bike two years ago it came with A-ST's on it, I done over 2.5k miles on those, in all weathers and had no issues. After getting a screw in the rear, and knowing I was going to change them before the M.O.T. due to the front being worn, I checked the dates. It turned out they were very old for tyres so where hardened, but still worked well. That was part of the reason for going for them again rather than the newer designed A-ST 2's or A-GT/A-GT 2's or other comparable tyres from other brands.

How do you tell if the chain is tight enough and not lose? my first bike 650R !

@HalfdeadRider

3 жыл бұрын

There is a measurement in your owners manual you check the slack with a ruler, different for many bikes. There will be dedicated vids to tightening your chain. Sorry if I didn't mention it in any way in the video.

Can u say about your spool size?..and thread size

@HalfdeadRider

2 жыл бұрын

If I changed anything from stock sizes I'm sure I would have said so in the video bud. If you need to know the stock sizes of the sprockets or bolts look on Kawasaki parts lisings like here www.kawasakiparts.com

What is the size of the front sprocket and rear thank you

@HalfdeadRider

3 жыл бұрын

It may tell you in the owners manual, or check the parts list on a Kawasaki main dealer site, but I think it was 15 stock. I did -1 for a little while before going back to stock. The parts site I use for my bikes - www.kawasakioriginalparts.com/

Did it change your speed?

@HalfdeadRider

4 жыл бұрын

I went down 1 tooth on the front sprocket, that makes it accelerate quicker but you lose a bit of top speed. You would not want to go up on the rear too, that would be to much on these torque monsters with quite a low top speed and good acceleration already.

@zstunts4843

4 жыл бұрын

What did you set your torque wrench to?

@zstunts4843

4 жыл бұрын

?

@HalfdeadRider

4 жыл бұрын

@@zstunts4843 Sorry I was not notified of this comment, torque settings are in the description if still of any help to you.

Torque specs?????

@HalfdeadRider

4 жыл бұрын

Did I not put them on screen or in the description? can't remember if I did. Sorry if not, but here you go. Rear Axle Nut is 108 Nm Caliper Bracket Bolts (Front) 34 Nm (Rear) 25 Nm Front Sprocket Nut 127 Nm Rear Sprocket Nuts 59 Nm Speed Sensor Bracket Bolts 10 Nm If I've missed anything let me know.

@HalfdeadRider

4 жыл бұрын

I just added them to the description too.

@diegomarines4012

Жыл бұрын

Amazing video thanks from California