Motor Grader Skilled operator grades the road
Автокөліктер мен көлік құралдары
This is the last video of this short road. I made it a bit longer so I could upload just 1 video.
More grader videos will come in the upcoming weeks. We will be grading a new road so stay tuned
Update on JCB videos: At the moment we don't have work for it so I have no material to record sorry. We expect to be working around 15 of April if not then maybe next month
I hope you enjoyed more grader videos coming I have the whole product from the start to the end so stay tuned!
I hope you like this video please subscribe and comment it really does mean a lot if you do
watch more:
• Grader-Greder Operatin...
• Grader Inside The Cab ...
• Grader-Greder Operatin...
• Grader-Greder Grading ...
subscribe here:
/ @tptimi
Пікірлер: 41
U can't RUSH ART. Do ur thang. Looks good
Bravo operateur !!
Great video 👍 Thanks for sharing 😉
I personally places a rough on the 4th or 5th gear, then for fine grade the crowned shape height, on 2nd, full trottle. !! Then the roller !
I just did 2 roads and a parking lot the same way with string and paint, no GPS.
I used 3 person as my assistant. 2 person to pull the string 1 person whos measuring and marking. Sometimes we use white sand as a marker
Beautiful! Looks families. Where were you?
Good
wow first and one to Commant on this anyway that roller at the start is that your roller or did you hire it just wanted to know keep up the good work guys much love from Australia
@TPTimi
5 жыл бұрын
Actually, for grader videos, we work for another company so it's theirs. Only JCB is ours for now. But thanks for the comment.
@luckyandlaylaandnathanmuel1269
5 жыл бұрын
TPTimi that's ok it looks good man just a other day in the office
TP as in travaux public? Vous etes francais?
What are the tolerances plus or minus in your area for a road like this
@TPTimi
4 жыл бұрын
About 1 cm
@davidhinson4820
3 жыл бұрын
Ours were a quarter inch.
Where is this job? I hope to find a job. I have a Grader operator certification Three years experience
@davidhinson4820
3 жыл бұрын
Where do you live???
You guys should really wear some reflect cloths for your own safety, otherwise nice video
Bien travailler 24:15
مرحبا ياريت بتكون عندي هاي
What grade tolerances are you required to achieve?
@TPTimi
4 жыл бұрын
1 cm usually
@arkansas1336
4 жыл бұрын
@@TPTimi--- We also have that same tolerance + or - 1" (2.54cm)
@hrv0.-
2 жыл бұрын
+- 0.5 cm on highway road
@hrv0.-
2 жыл бұрын
@tptimi you have experience obvious,and tell me one thing...is it possible correct grading if your blade is not straight...edges on both sides are 1.5-2 cm higher than in the middle of blade...
Bocciato,una macchina buona, anche se non la migliore,ma non e la macchina che fa il lavoro e neanche l,autista che usa le leve,ma l,impostazione del lavoro,e il materiale in più nelle banchine? Sarebbe la prima cosa da pulire e liberare i picchetti e non dico altro,senza nulla togliere alla,operatore,lavoro con il greder da quando avevo 12 anni ora ne ho 49
to much metal got 3 wind rows.gun have push or forward or blow off side
@TPTimi
4 жыл бұрын
what?
I’m Greader Opraitor work in Saudi Arabia 12 year where this country
@TPTimi
4 жыл бұрын
Slovenia
@dickmeisterling3924
3 жыл бұрын
@@TPTimi I was looking for the same info thinking it was a familiar nearby site. I live in Iowa... Ugh.
Once you have the level, why do you go so slow ?
@TPTimi
5 жыл бұрын
because we are not at a hurry you don't always have to go fast
@renohuskerdu4592
4 жыл бұрын
Easier on the machine. That roll of base weighs a lot.
@gsharma70
4 жыл бұрын
Nd he is working on ABC soil...grader suppose to grade slow 4 level
@wailnshred
3 жыл бұрын
Probably he goes whatever speed the machine will go without bouncing.
@tassi13827
2 жыл бұрын
We always went a lot faster on the interstate 1/2". no bounce.
A quella macchina dovevano uscire le fiamme dalla lama
Are you paying by the HR
Ever cut blue top?
That's just imbarrising