Great video as always hope you had a great holiday looking forward to seeing more videos very soon 💪🇳🇴

@Vidarsteinsland

Жыл бұрын

Hei Dylan🙂The holiday was very nice, it was good to not have to commute to work for a few weeks🤗. The videos are coming continuously forward now😎👍

Excellent sir🎉

@Vidarsteinsland

27 күн бұрын

Thanks🤩👍

Keren systemnya👍

@Vidarsteinsland

Ай бұрын

oilquick dan rototilt adalah sistem yang luar biasa 🤩🤩

Absolute operator brother , great skill ! We love these things in Australia haha hopefully I get a seat in this operation either civil or mining ! I have my qualification for it but so hard to get seat time cause it’s good money here in Aus so no one wants to leave the vehicle haha ! Awesome videos brother keep it up .

@Vidarsteinsland

7 күн бұрын

I know it's hard there and well paid🤩👍. I have someone I know from New Zealand who has got a job there now😳👍. but don't give up

Nice

great work

@Vidarsteinsland

Ай бұрын

Thanks🤩👍

Nice system 😊😊😊

@bjornmagnusson259

Ай бұрын

i think that system is Engcon made in SWeden

@Vidarsteinsland

Ай бұрын

@bjornmagnusson259 I have rototilt R8 on my excavator🤩👍. Onley that this is painted black and had now called cat RTS23🫣.

I'm very happy with this 335 🤩🤩👌To be honest, I don't know what the oilquik mount is called, but there are 70mm bolts on the bucket. So we just call it S70 here in Norway😎👌

Hope you had a nice vacation!

@Vidarsteinsland

Жыл бұрын

Yes, the vacation was nice🙂👍. I renovated our TV room in the basement, which my wife has asked nicely if I couldn't do for several years.. She has asked me every summer for the last 16 years🫣🫣

Did you guys install the sheet piling ahead of time? Is it deep enough that you don't need to brace it? If you did do sheet piling ahead of time did you expose the wires on the left first with a hydroexcavator first or something?

@Vidarsteinsland

Ай бұрын

They started drilling these steel pipes into the ground before I got there because there was such a tight and poor space there. We got a cable surveying company to survey where the cables were. But we had to dig out some places to find out where some cables crossed the street. They used a well drilling machine for the job of getting these pipes down into the mountains. These pipes are drilled 6 meters down. we had full voltage on all the power cables when we dug out this street😵‍💫. But it went well and I have done this many times before🙄. And we have a wheel excavator on this job too to take care of the small thinks🤩as you can see on the other videos from this job😀

re bonjour content de te revoir , j espère que les vacances ce sont bien passe , tout cas une très belle vidéo bon courage a toi pour la suite 😍👍👍👍👍

@Vidarsteinsland

Жыл бұрын

Salut. Les vacances ont été formidables et maintenant nous y revenons après 3 semaines de vacances 😎👍. Alors maintenant, il y aura de nouvelles vidéos à l'avenir😎👍. J'espère que vous avez également passé de bonnes vacances d'été 😀👍

@michaellorio9774

Жыл бұрын

@@Vidarsteinsland re bonjour content que tu a passe de bonne vacance moi c est demain

😱😱😱 wow Geilomatic.. ich will auch paar Bagger, Radlader, LKW um Spaß zu haben 🥹🥹

Crazy work around cables. This is how fibercut happens.

@Vidarsteinsland

4 күн бұрын

hello and nice of you to comment here🤩👍. But I can assure you that no cables were damaged on this job. Although it looks a bit brutal. They withstand more handling than we think. But if you look closely, there is a lot of clay in the bucket which is an assurance that the cables will not be damaged when I do it this way. I've been digging for cables and other strange things in the ground for 40 years, so I think I know my job😀

The more I'm looking at it, are those cast iron pipes driven into the ground on the sides?

@Vidarsteinsland

Ай бұрын

Yes they are 6 meters deep

@brianpearl7504

Ай бұрын

@@Vidarsteinsland so cool thanks for explaining

@Vidarsteinsland

Ай бұрын

@brianpearl7504 🤩👍. I think it's nice to get questions here and I'll always answer as best I can🤗

Where did you buy that floor mat?

@Vidarsteinsland

Жыл бұрын

Hello. I ordered the floor mat through the CAT dealer here in Norway 🤩👍. But they have very nice floor mats at www.fordon262.se too😉👍

5:27 Are these really 4,27t in the shovel? Hard to believe, somehow. And on the other side of the display, you can see what the total load is from the Truck, right?

@Vidarsteinsland

Ай бұрын

First, I have to say it's nice to receive questions here🤩👍. It is true that I have 4.27 tonnes in the bucket. This blue clay we have here in Norway is extremely heavy😮‍💨. I have actually had over 5 tons at most in the bucket shown in previous videos. What you have observed is correct, that the weight loaded onto the lorry appears on the left.

@Nasenharbaer

Ай бұрын

​@@Vidarsteinsland I drove trucks myself for some time, including steel coils, and was always very impressed by how a relatively small coil that nevertheless weighs 22 tons can bring a truck to its knees. And now these almost 5 tons, in a shovel, that is somehow impressive. Also how easily the excavator can lift it. Thanks for ur answer. :)

@Vidarsteinsland

29 күн бұрын

@Nasenharbaer After I got a weight system in the machine, I have been very surprised at how much the different masses weigh🙄

Como flyer moon mee😂

Why didnt you load the truck from the side?

@Vidarsteinsland

4 ай бұрын

The reason why I don't load the trucks from the side is that there is no room for it and I would then have to close the street and load over our fences and we are not allowed to do that here due to safety. Normally, I would have loaded from the side because it goes faster😉👌. This was a narrow area we worked in and a lot of pedestrians outside the fence at times. This is why I load them from the back😎👌

@ibix8406

4 ай бұрын

@@Vidarsteinsland thanks for the reply, thats what i also thought i just wanted to know if this is the case. Nice excavator ! What size of the OQ do you have it seems like an OQ 65, am i right?

To treba tak že si sadnem naštartujem a už aj motor tlačím do otáčok? Netreba pár minút nech sa motor trošku zohreje??? Pán strojník hm??

@Vidarsteinsland

3 ай бұрын

Spustenie stroja CAT si vyžaduje čas😮‍💨. Má pomalý operačný systém. Už 3 týždne je v kľude, tak je dobré sa na začiatok oddýchnuť 🤪👍

@BAXTERKA.

3 ай бұрын

@@Vidarsteinsland 🤜🤛👍

Is it hard to learn the controls of a tilt rotator system?

@Vidarsteinsland

2 ай бұрын

yes, it was a little frustrating the first week learning to use those rollers for the rotor tilt😮‍💨. But then it got better and after 14 days there was no problem 👍. I got my first rototilt in 1999😳. so it has been a few years with tilt on the machine😀

Kamyon çok büyük😂

@Vidarsteinsland

2 ай бұрын

HAYIR. Çok küçükler, yüklemek çok hızlı 🤪🤣🤣

har kommet meg i arbeid nu ^^ men er på prøve tid i 3 mnd hehe. ikke så mye maskin kjøring på meg enda haha. klarte og få jobb hos Einar Sørensens Maskin. jobbar da som hjelpemaskinfører og grunnarbeider.

@Vidarsteinsland

Жыл бұрын

Det er jo kult😉👍. En plass må en jo starte😀. Det var sånn jeg også begynte i jobb i 1984. Da er det bare å gi bånn gass å møte opp på jobb hverdag og gjøre så godt man kan😎👍. Lykke til🤗🤗

@Snipesdesigns

Жыл бұрын

@@Vidarsteinsland skulle nu ha vært på jobb i dag men 2 dager inn i den nye jobben så ble jeg syk. men skal bare være borte 1 dag. er bare sikkelig forskjøla

@Vidarsteinsland

Жыл бұрын

@@Snipesdesigns Det er sånt som skjer🤧🤧. Det kommer nok flere sånne dager når vi går å trakker i all denne dritten vi gjør🫣🤣🤣👍

@Snipesdesigns

Жыл бұрын

@@Vidarsteinsland yup

@user-eg9wv9iw8l

2 ай бұрын

@@Snipesdesigns nnnn. Nnnnn

What’s the price of this machine? Any idea?

@Vidarsteinsland

2 ай бұрын

Good question 😀. I mean I have heard that it costs NOK 5 million with all the equipment I have for it. So it's a very expensive machine🤩👍. It is about 440,000 euros.

@Mudisolo

2 ай бұрын

@@Vidarsteinsland Wow, i sell second hand caterpillar machines from China, nice video man! Have a nice day.

@Vidarsteinsland

2 ай бұрын

@@Mudisolo Have a Nice day you too and nice that you like the video🤩👍

0505?

@Vidarsteinsland

Жыл бұрын

En hemmelighet😉👍

Dude's whole languange sounds like me trying to eat something sour.

@Vidarsteinsland

2 ай бұрын

This is how my voice sounds in Norwegian. So it's not so good to get anything done with it🤪👍. I film and dig and do the best I can here😉. Here on my channel, nothing is edited or done that much, so then it will be as it will be😀. But I hope you enjoyed the movie🤩👍

@NickKautz

2 ай бұрын

English probably sounds weird to you the way your language sounds weird to me.@@Vidarsteinsland

@Vidarsteinsland

2 ай бұрын

I think English is a difficult language, but I have started to speak more and more English in my videos🫣🫣😱. Even if it's a little bad English🤣🤣. When I started in this industry in 1984, we had almost no English-speaking workers in the construction industry in Norway. so the English knowledge I had from school disappeared because it was never used and that's a shame😩. But I try my best to speak more and more English 😉👍

Maybe let it warm up….

@Vidarsteinsland

2 ай бұрын

I usually do it when it's cold, but here the weather is warm so I don't always do it 😉👍

Melany 🎉si lo copiastes

If you are reading this right now, know that Jesus Christ loves you.

norska

@Vidarsteinsland

Ай бұрын

Ja🤩👍

29:54 finally speaks English. hahahahahaha

@Vidarsteinsland

Ай бұрын

😂🤪👍

@Vidarsteinsland

Ай бұрын

I'm trying my best at this English stuff😵‍💫😵‍💫🤣🤣🤣

My name is frank owusu from Ghana am excavator operater I heva 2years experience in job I need work

@Vidarsteinsland

20 күн бұрын

sorry, unfortunately I can't help you😳. You must consult the Norwegian authorities about what you must do to get a job in Norway 😉👍

@FrankOwusu-dw6ri

20 күн бұрын

@@Vidarsteinsland okey

No warming up?

@Vidarsteinsland

Жыл бұрын

Hello😃. I have an engine and cabin heater in the machine. So the machine is nice and warm when I get to work. But sometimes it doesn't work, but it works well because it's not that cold now🤩👍

Aà

can you add a translator thanks already a

@Vidarsteinsland

2 ай бұрын

Hello. As you can see, I'm not very good with data, editing and div🫣. so I'm constantly learning this KZread stuff. I've started to speak more and more English in my videos and it's far out of my comfort zone, I'm not good at speaking English 🤪. so this is a steep learning curve for me. So you have to be a little patient here. But I appreciate the call to have my films translated. I'll try to get into it and see if I can get it to work. But I don't want to promise anything😉👍(I'm using Google translate to write this🫣🫣)

@harmen4839

2 ай бұрын

@@Vidarsteinslandok have a nice weekend

@Vidarsteinsland

2 ай бұрын

@harmen4839 you too🤩👍

I think you are a novice driver

@Vidarsteinsland

2 ай бұрын

I have driven a machine for 40 years, but I still have a lot to learn😉👍. So in a way I'm a beginner as a machine operator 😛🤣🤣🤣

@utherlightbringer3868

20 күн бұрын

bruh these internet geniuses

@Vidarsteinsland

20 күн бұрын

@utherlightbringer3868 Those people, the cables are exactly where they fit😵‍💫😵‍💫🤣🤣. Always where we have to dig ditches😩

А кто технические жидкости проверять будет? Так же можно двс запороть не говоря о остальном! Выбесил аж!!!!

@Vidarsteinsland

2 ай бұрын

Я не совсем понимаю, что вы имеете в виду!?? Зачем мне тюнинговать двигатель? Для этого вам необходимо подробнее объяснить, что вы имеете в виду🤗 и зачем мне проверять уровень мешка на машине. Машина сама это делает.