Thank you for your video. Learned a lot controlling dc, stepper and servo motor. Your the only KZreadr channel that’s clearly explained the Arduino motor shield all the rest are very complicated. Thank you again, now I’ll subscribed to your channel

@UtGoTech

4 ай бұрын

Thank You Most Welcome...

Thank you, this was so great.

@UtGoTech

10 ай бұрын

Glad it was helpful!

Very nice video for someone who needs to learn how to use the Motor Shield.

@UtGoTech

Жыл бұрын

Thanks 👍

Nice buddy...

@UtGoTech

2 жыл бұрын

Thanks

thank you sir very much for your explanation, I have to plan build a sticker cutter using l293 d driver using nena stepper motor , can you help me to program how to make pls... help me

@UtGoTech

2 жыл бұрын

Welcome.

Thank you

@UtGoTech

Жыл бұрын

Welcome👍

Very good video 👌 Your explanation is very clear and easy to understand 👍 Can we run bldc motor using this?

@UtGoTech

Жыл бұрын

No, this motor driver cannot drive BLDC motor.

Thank you Sir, I have a question how it can be done if i want to control multiple motors independently?

@UtGoTech

2 жыл бұрын

Just code as per your requirement

we can combine control 4 dc gear motor and 2 servo motor on l293D motor drive.

@UtGoTech

2 ай бұрын

Yes

bro if i use 12v external to motor drive the. will all motor get 12v equally ???? i will use ac to dc adapter of 12 v so parellel it will work?

@UtGoTech

2 жыл бұрын

Yes

How we can use dc motor in cnc ? Plz without step motor i want the same list 4 dc motor and l293 driver ardouin

@UtGoTech

5 ай бұрын

CNC requires accurate positioning. That's why it seems difficult to achieve using simple DC motors.

Excellent video, it helps me a lot. Just one more question, when you directly supply power to the arduino motor shield, what is the voltage range? thanks

@UtGoTech

4 ай бұрын

You can give 6 volts to 12 volts. But I suggest you use it up to 9 volts.

i am using this to make a drone.So,how can i increase the speed very high?(its brushed motors with 50000 rpm) pls say fast .

@UtGoTech

13 күн бұрын

This motor driver can drive a drone motor

Can we run neema 23 steeper in place of CD-ROM drive steeper

@UtGoTech

Жыл бұрын

No. Neema 23 motor required much more current than L293D motor driver can provide.

Sir we have to connect two servos in a single motor driver shield and we have connected hc 05 to that servo pins so sir how can we solve it?

@UtGoTech

Ай бұрын

You can use pins from A0 to A5 to communicate with the bluetooth module and use 2 servo motors

Is there away to control all that with a pontiometer and a push button?

@UtGoTech

2 жыл бұрын

Yes

Hi ,thank you very much for the video,I have a project but I need to run 2 stepper motores with 2 servo motores and 2 dc motores in one arduino ,so I need to add one stepper and one servo to the configuration you've done in the video ,is that possible and how ,thanks

@UtGoTech

Жыл бұрын

No. It's not possible with Arduino Motor Shield.

@juliuscaesar5001

Жыл бұрын

@@UtGoTech OK, do I have to buy 2 arduinos to do it? Thanks

@UtGoTech

Жыл бұрын

There are different ways to achieve it. Yes you can do it with two Arduino board.

@juliuscaesar5001

Жыл бұрын

@@UtGoTech thanks

@UtGoTech

Жыл бұрын

Welcome

how to code motor DC and servo motor at the same time

@UtGoTech

11 ай бұрын

Code using the functions shown in the video. Just make sure to include Adafruit Motor Shield Library.

Please make solar flower opening & closing & opening 3 servo drive motor with LDR SENSOR. PLEASE HOW TO CODING.

@UtGoTech

5 ай бұрын

Share details. What project do you want to make?

@srihari1992

5 ай бұрын

Solar flower project.

@UtGoTech

5 ай бұрын

Please share some sample pictures with us through Instagram.

I need ir and ultrasounic please bro put it

@UtGoTech

3 жыл бұрын

For using all motor and sensor you have to focus on timing. Using proper timing you can control all the sensors and motors, which will look like you are controlling it simultaneously.

hi I am having problem with my motor running without the power going through arduino

@UtGoTech

Жыл бұрын

Can you explain little bit more

Hey can you make a tutorial on how to program the stepper motor using the motor shield

@UtGoTech

2 жыл бұрын

I have already made it.

@n9583

2 жыл бұрын

Link?

@UtGoTech

2 жыл бұрын

kzread.info/dash/bejne/qKOjrKeyk9KXepc.html

When I connect my battery with the driver shield then the green light do not glow. Can anyone help me plz?

@UtGoTech

8 ай бұрын

Check the polarity of battery. If the polarity of the battery is correct then check the voltage of the battery in the terminal where you have connected.

how much power should I give to the motor shield? and send a link for your screwdrivers to buy

@UtGoTech

3 жыл бұрын

You should give power according to the motor attached to the motor shield.

@UtGoTech

3 жыл бұрын

I am using Iron Spider (45 in 1 Tool Kit) www.amazon.com/Precision-Screwdriver-Tamperproof-Security-Extension/dp/B00SXF68IW

What about controlling motors with buttons? With the shield, I'm seeing a problem with adding buttons to this set up since all the pins are occupied with the motor shield.

@UtGoTech

Жыл бұрын

No pin 2 and all the analog pins are free. They can be used to take button feedbacks.

@williamlivingstone4326

Жыл бұрын

@@UtGoTech how would you plug them in? Would you just use jumper wires instead of plugging the shield in directly?

@williamlivingstone4326

Жыл бұрын

@@UtGoTech I didn't even notice the extra spaces leading to no where on the shield! You are 100% right! Thanks @Ut Go!

@UtGoTech

Жыл бұрын

Welcome

@UtGoTech

Жыл бұрын

I have plugged the shield directly which is shown in starting of the video.

how to conect to 2 servos

@UtGoTech

2 жыл бұрын

Watch full video and you will know

how to conect to servos

@UtGoTech

2 жыл бұрын

Watch full video.

Hi, I am so confused why my motor shield doesn't run. I used the exact the same code as yours.

@UtGoTech

8 ай бұрын

Are you using the correct power supply?

@zhengqiangyao4269

8 ай бұрын

@@UtGoTech I think so, I tried using jumper to power the motors at the same time.(not working) Also tried to use 6V battery to power it up but not working as well. I measure the voltage of the four connections and none of them have voltage. Then I guess my motor shield is broken so I get a new one from amazon, not working still.

Bro how could run all in. One code

@UtGoTech

2 жыл бұрын

Didn't understand your query

Hi sir! please provide me code to run servo motor and dc motor at the same time as you shown four (servo motor, 2dc motor, stepper motor)different motor at the same time(15:56 in this video)

@bramarambica8032

2 жыл бұрын

Same to you

@UtGoTech

2 жыл бұрын

You have to modify the code according to your need.

@inspire1453

2 жыл бұрын

@@UtGoTech Hi, can you show how to do that ??? Or can you share the code please ??

@UtGoTech

2 жыл бұрын

What is your requirements. Explain it clearly.

@inspire1453

2 жыл бұрын

@@UtGoTechI'd like to just see the code. Because i don't understand how to conect code servo and dc motor

How much power did you supply for running all motors at the same time? (@ timestamp 1:12)

@UtGoTech

3 жыл бұрын

6 volt

Sensors bro how to connect with this

@UtGoTech

3 жыл бұрын

Which sensor you want to connect ?

@smnsdf

3 жыл бұрын

@@UtGoTech ir and ultrasounic please

please tell why dc motor doesnt drive, it's only beeping. i use 9 v battery and did everything from the video

@UtGoTech

Жыл бұрын

Use lithium ion batteries as shown in the video.

@Christinanersisyan

Жыл бұрын

@@UtGoTech thank you very much, now it's works, I just put 18650 battery as you mentioned

@UtGoTech

Жыл бұрын

Welcome

Does the motors get the same amount of power you supply the board with?

@UtGoTech

Жыл бұрын

Partially true

@duljayasavinu3814

Жыл бұрын

@@UtGoTech what’s wrong then?

@UtGoTech

Жыл бұрын

Are you talking about power or voltage ?

@duljayasavinu3814

Жыл бұрын

@@UtGoTech voltage

@UtGoTech

Жыл бұрын

Average Voltage changes according to the speed of motor.

I really like your content and your videos keep going ♥️🔥

@UtGoTech

2 жыл бұрын

Thanks 👍

please can do that use python and how

@UtGoTech

2 жыл бұрын

I think Arduino support C programming only

Code?

@UtGoTech

2 жыл бұрын

You can find example sketch given with the library

Can we control this with bluetooth

@UtGoTech

Жыл бұрын

Yes you can

@harrys6342

Жыл бұрын

How??

@harrys6342

Жыл бұрын

@@UtGoTech can I control servo motor like steering for rc car

@UtGoTech

Жыл бұрын

Yes, you have to code according to your need.

@harrys6342

Жыл бұрын

@@UtGoTech ok thank you 😍😍