This is the only helpful maintenance video I've found so far for dongfang I can't find anything on it. Thanks Joe 1000x👍

@billthames9564

4 жыл бұрын

yeah, the Chinese build some pretty good stuff for the price, but their documentation and "manuals" are a total joke, or missing altogether.

@JoshBarrios

4 жыл бұрын

I got one for a 200cc it wasn't even for my utv

@TEXASpatriot76

2 жыл бұрын

Also can't find parts for them! I have been hunting balljoints for mine. I gave up. I'm just going to cut the control arms and and American made parts.

I don't know why anybody would give this video a thumbs down but in my opinion it was a good video. Thanks Joe

@billthames9564

4 жыл бұрын

Thanks mustang man. I've got over 1,000 HARD, 90% offroad, miles on this cart now. running good.

@skat3stepvirgo

4 жыл бұрын

Just curious who owns the glass Pyrex measuring cup ?

@billthames9564

4 жыл бұрын

@@skat3stepvirgo belongs to my wife. had to sneak it out of the kitchen...

Thank you for the info!. To note the second drain plug next to the oil plug with screen is the actual oil drain plug. So should open the oil drain plug 1st then open the oil filter screen 2nd clean then reinstall then refill oil. Generally all GY6 engines take about one quart of 10w-40

Thanks for the video. I was lost. My 2019 Trailmaster Xrx 150, has the same setup

@billthames9564

4 жыл бұрын

Yes Sir. If the Chinese ever figure out how to write operating manuals for their products, they might do very well.

Great video, thanks man.

@billthames9564

2 жыл бұрын

Yes Sir !

Gracias muy buen video me sirvio de mucho para el que yo tengo y hacerle. Servicios

@billthames9564

4 жыл бұрын

Yes Sir! Gracias

so glad i found this video i recently bought a df200gke has the same engine as this, mine also did not come with any build instructions or owners manual.

@joenovice5476

7 жыл бұрын

Yeah, we have to kinda feel our way with some of this Chinese equipment. They are not big at all on documentation.

Well done

@billthames9564

Жыл бұрын

thanks

You were wise not to jack with the other bolt. Overtorqued by factory slung my wrist into the frame when it finally broke free. Some huge screw that was hollow inside and with a ball bearing on the end. No oil came out of it either since it all came out of the other one. Wish I'd found your video before. No idea if that was supposed to be there or if it broke free inside. My transmission had been leaking so I was replacing. I think the rear bolt is stripped some how. It makes it to the final twist and then doesn't want to tighten. Thanks for the video.

@joenovice5476

3 жыл бұрын

Wow, Tom, some bad news on the bolt. I thought it might be something to do with the transmission, not sure. Thanks to you for confirming to leave that one alone - this info will be helpful to the other gy6 owners who also wish the Chinese would learn how to write manuals for their equipment.

Great video Your engine is the taida engine if you need any parts and the stud spacing is 57mm

@billthames9564

3 жыл бұрын

Mighty Fine! Thanks for the info, Dustin.

I realize this video is fairly old....but it is the same setup as the new Linhai Crossfire LHU2000 "Adult Golf Cart". This is also the ONLY video I've been able to find to explain this simple process. The golf cart has a manual...but it doesn't show anything, and the English is...well....rough. If you don't mind, please add a Tag or edit name to include the Crossfire Golf Cart.....this video is badly needed in that community. I might do one as well...but yours is the first I've seen and I've been looking hard. Thanks!!!!

@billthames9564

Жыл бұрын

will try to do that

best vid ever !

@billthames9564

3 жыл бұрын

Thank You Sir

What type of oil does the gearbox use

I think this is similar or about same thing as the Yerfdog Side by sides UTVs or as they call them CUV.

@billthames9564

3 жыл бұрын

yeah, you're probably right. I think most of these Honda clones are pretty much the same.

You talk about smell. I just changed my trans fluid in my Mudhead 208r and it was black and smelled like burnt garlic. Is that the smell you were talking about?

Thank you so much. I have a Cazador 170 (179cc) and no manual. What engine oil weight? What transmission oil weight?

@billthames9564

Жыл бұрын

engine oil depends on your area temperature. Here in mid- texas where it rarely gets below 40 degrees, I use 20W40 or 30 weight. wouldn't use synthetic on a brand new engine - needs to break in with regular oil If you are in colder climates , probably want 10W40. wouldn't ever go to a thinner weight in these air cooled engines. On the transmission, I used 75W90 - I think there's a picture of it in the video.

That bolt you said not to take well took it off was like a gray fluid how do I refill it?

@billthames9564

3 жыл бұрын

Motor oil would be black, so if its gray, it must be old transmission fluid. You can verify that it wasn't motor oil by checking your motor oil dipstick. My video that you watched tells how to refill the transmission fluid . New transmission fluid will be gold colored. wear gloves - that transmission fluid really stinks

what grade of oil is used for the transmission?

@joenovice5476

7 жыл бұрын

I used 75W90

I cannot find why oil type to use. I was thinking 5W-30 but I can’t find anything. I have the same engine. What weight did you use?

@billthames9564

3 жыл бұрын

I use 10W40. the place that sold me the kart suggested that.

Do you still have this kart. I have one and am trying to repair it. Someone took it apart and lost a lot of parts. A reference would help greatly.

@billthames9564

7 ай бұрын

Sorry , I sold it a month ago. the Chinese were never very good about publishing manuals or even diagrams. sorry I can't help.

Joe, im in the process of an engine replacement, would you mind messaging me somehow? i have some questions

@billthames9564

5 жыл бұрын

I may not be much help, but try joe@joenovice.com

What kind and weight oil do you use?

@billthames9564

8 ай бұрын

10W40 any name brand oil. synthetic OK

Does anyone know what that screw that is X'ed out at 2:37 seconds is for? I removed this and there's a little ball bearing at the end and a little liquid came out. Not sure what it is.

@billthames9564

4 жыл бұрын

I could never find any details on the GY6 clones. If a ball bearing was in there, I'm guessing it was some kind of check valve, or backflow preventer, ????, in the oiling system????

@AntonioPerez22

3 жыл бұрын

its for shifting gears .... ball, spring, bolt.

@tomw6308

3 жыл бұрын

Same thing happened to me. I put it back up there, but I'm not sure if the ball bearing stayed. Hopefully I didn't screw up the kart more than before.

I have a dong fang that I bought new for my kids. After a long ride with the kids the kart would not go in forward or reverse. After draining the gear oil not very much came out. What could it be please help.

@billthames9564

Жыл бұрын

you need to put a pint of oil into the transmission case, as per the video. I used 70W90. if that doesn't make it go, I'm not sure what to do.

@IsaiasMoreno.

Жыл бұрын

@@billthames9564 I seen on a post that these go karts also have a belt and clutch so I will be trying to work on it and hope that's it.

How often do I have to change the transmission oil??

@joenovice5476

7 жыл бұрын

what makes sense to me is to change the tranny oil every 600 miles and the motor oil every 300 miles. That dirty transmission oil that is shown in the video was about 600 miles, and it was also the original transmission oil that came in the kart, so technically it was "break-in" oil, and may have been carrying some metal shavings, etc.

@germanshepard3586

3 жыл бұрын

What type of transmision oil should I use?

@Jesus_Saves_J2415

2 жыл бұрын

@@germanshepard3586 SAE 85W-90

Anyone know why you might have oil in air box. Too much oil?

@billthames9564

4 жыл бұрын

that's all I could think of. not sure where any other oil would come from on these Honda clones

@bellyacre1

4 жыл бұрын

@@billthames9564 Thanks, the airbox has drain hose with plug. I noticed oil under kart. I found it to be coming from the hose. And, opened it long enough to empty. I do keep extra oil in it. No smoke or anything. Just something I need to watch.

@billthames9564

4 жыл бұрын

@@bellyacre1 very good.

That’s not oil drain that’s the oil filter and the other bolt is your drain so just FYI I specialize in these Chinese engines

@user-neo71665

6 жыл бұрын

The oil screen needs to be cleaned anyways and the oil drains from it just fine. All the years I've been working on gy6s I've always used the oil screen and have never had a problem.

@devshewitt4809

6 жыл бұрын

The x is the other side of case oil drain but others the main

@devshewitt4809

6 жыл бұрын

But some gy6 have a spring with a ball bearing in that kind of bolt so be careful removing any bolt

@devshewitt4809

6 жыл бұрын

The other bolt on motor is oil drain other is oil filter only you will not get all oil out

@trevorbrown5517

6 жыл бұрын

Devs hewitt rr U

My engine revs up but no forward or reverse any help?

@billthames9564

Жыл бұрын

all I can suggest is make sure the tranny oil level is OK. other than that, I'm at a loss. never had that problem.

@Jesus_Saves_J2415

Жыл бұрын

@@billthames9564 thanks for the tip 🙂

Thank you so much for posting this. I have almost the same buggy, the DFG200GKD. The only difference is the roll cage and front end. You are correct about the lack of documentation, all I got was a manual that appeared to be for a different product or too general in nature. I had read that you should change the oil soon after riding a little. Mine has 24 miles on it so I went to change the oil and drained the gear oil instead, lol. I had no idea where to re-fill it until i saw your video. By the way in one of your related videos (I watched all 3) you mentioned that it had 6 or 7 hp I think? These have approximately 10hp. Sometimes I've seen them listed as 7.5Kw which translates to about 10hp. Please share any more helpful info you have acquired. Here is a video I made of mine, and yes it was fine at the end. kzread.info/dash/bejne/dICYo5iIqZXUaMo.html

@billthames9564

2 жыл бұрын

Great video of your kart. Yeah, it may be 10 HP. When I bought mine in 2014, they had just "upgraded" the engine from 149CC to 170CC or so they said. Will do 30 MPH on level road. Mine now has 1200 miles on it, with 90% of it being in rough terrain. All the geometry, struts, springs, etc on this kart have never failed, and the grandkids hit some pretty tough bottomings, so I think it is well engineered to be an off road vehicle. I encourage you to make the wheel lug changes mentioned in my You Tube video. I will leave the url at the end of this reply. I had some instances of the fenders flying off ( you gotta have fenders if you go in mud), but I fixed that by welding on some slightly larger plates where the bolts go thru to hold the plastic fender on the frame. the only really maddening thing that it did was that the FUSE HOLDER, of all things, rusted inside (poor chrome coating), and caused intermittent problems with starting. I almost never figured that one out - who looks INSIDE a fuse holder?? that's what you get with Chinese stuff: some well done stuff and some poorly done cheapo stuff. I also changed out the 9 MAH battery for a 14 MAH battery. starts with only half a turn of the starter, even in 10 degree weather. had to enlarge the battery box a bit. go to this url: kzread.info/dash/bejne/oIyAxamznZe1d5s.html

@Autoxdriver

2 жыл бұрын

@@billthames9564 Thanks for the reply Bill! And for the tips re. the fuse holder and wheel lugs. It's nice to know that overall it's reliable. I don't have little people driving mine and I'm looking to up the HP, I'd like about twice what it has now. This 169cc motor is a GY6 but it has a slightly different head size than the 150ccs that have tons of performance mods available, although intake and exhaust mods should be the same. Also I understand one of the best improvements you can make to the GY6 is changing the variator slide weights in the CVT/torque converter. Supposedly it allows it to operate at higher RPM, etc. but I'm not sure if they are the same as the ones for the 150cc. If you are ever interested in performance mods I'll share more of what I've learned and learn by doing in the future. Take care and thanks again. - Alan

@billthames9564

2 жыл бұрын

@@Autoxdriver got it. thanks

This video is extremely helpful, I can't figure out anything on mine (Jaguar 200) Thank you!! Repent to God, sins are forgivable. Christ is King!

@billthames9564

11 ай бұрын

Did that at age 9. covered.

@e_s.0848

11 ай бұрын

@@billthames9564 An oil change? Or repentance?

@billthames9564

11 ай бұрын

@@e_s.0848 soul saving repentance

@e_s.0848

9 ай бұрын

@@billthames9564 Every day we sin