Excellent ideas. One word of caution. I learned this the hard way a few weeks ago. I accidentally knocked my Les Paul guitar off its stand and seriously cracked the neck. Because I needed the adhesive to flow all the way into the cracks, I decided to use super glue because of its water-link consistency. I used a 3ml hypodermic syringe with 18 gauge needle which I filled with the super glue so that I could inject the glue deeply into the crack. I intentionally used a lot of glue hoping it would ooze out. I immediately attached the clamps to hold the neck back together tightly with the intention of wiping off the excess glue. At that very moment, I discovered how noxious the fumes are when using that much superglue. I couldn't breathe around it and it immediately left my eyes burning severely. Consequently, I wasn't able to rub off the excess glue which meant I had a lot of unnecessary sanding to do once everything set up. The next time I work with that much super glue, I'll wear a respirator and eye protection.

@dimik3855

8 ай бұрын

A little fan beside your work area blows the fumes away nicely.

@sureshfrancis9202

8 ай бұрын

Use glasses when handling glue . Don't inhale .

@lilycarolyn4Christ

7 ай бұрын

Fan blows the soda n graphite😊

@RobertHollander

7 ай бұрын

@@dimik3855 Great idea. Thanks.

@creationholic101

7 ай бұрын

Hello! thanks for your comment. Wish you all the best!

I'm Bruce from Church Creek, Maryland, USA 'This' - was marvelous to watch. Super-thanks.

Creative and precise. A pleasure to watch. Thanks

@creationholic101

8 ай бұрын

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

Excellent tutorial!

👌👏👏👏👏👏 Realmente útil e inteligente GRACIAS Desde España

Man, as a longtime superglue/cyanoacrylate enthusiast I have to say these clever ways of making repairs rock! A refreshing change from all the clickbait and useless crap on YT.

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Excellent ideas and well presented. Thanks from Miami, Florida.

@creationholic101

8 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Thank you for your exposition. Very creative. Keep it up.

@creationholic101

8 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

High professionalism at work. And a very cool idea😊

@creationholic101

8 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Essa ideia da engrenagem foi demais!... Obrigado!

@creationholic101

8 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Nice one, that super glue is great once you add those ingredients to it. Thank you for those tips.

@creationholic101

5 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

I did know about baking soda but nothing about graphite! Many thanks from Rome Italy!

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

You saved the best for the last! Your improvised gear repair is brilliant! If you really want superior strength, use graphene powder. As others have mentioned, cyanoacrylate fumes can be noxious (the first time) but actually deadly on repeat exposure due to sensitization.

@creationholic101

6 ай бұрын

Hello! thanks for your comment. Wish you all the best!

I am from Saudi Arabia and I am honored to follow you because your videos are very, very useful

@alialavi3361

6 ай бұрын

سلام برادرم . من از ایران هستم . چرا به فکر مردم مظلوم غزه نیستید ؟ چرا اجازه می‌دهید رژیم قاصب صهیونیستی زن و بچه های بی گناه مسلمان را میکشد؟

Estoy iendo el vídeo por segunda vez, son muy buenos se aprende mucho de ellos desde Margarita Venezuela

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Excellent ideas and ingenuity. Good research.

Perfeito, já conhecia a cola de plástico com acetona mas a grafite com supercola e bicarbonato foi novidade, a reconstrução da engrenagem foi incrivel.

@creationholic101

7 ай бұрын

Thank you for your comment. Wish you have a nice day!

Mind-blowing impossible ideas, a great help to every house holds, thanks a lot bro.

@creationholic101

8 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Amazing idea, I deed not see that coming.

This kinda inspired me to reinforce some plastic things i have to prevent breaking.

@kaleungchan4989

7 ай бұрын

111111¹

Excelente q nuem trabajo con el carbon de la pila ,gracias desde lima peru

👍 super idée, bonjour de FRANCE 👋

I hadn't seen the use of graphite before. Thanks for sharing. The repair to the cog was inspired!⚙️

@creationholic101

5 ай бұрын

Glad it was helpful!

대단한.수리기술.👍🎉

Very well done! Kudos... from Brazil

@creationholic101

8 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

素晴らしい知恵です😮

The last one is tricky very good one indeed😊

Absolutely amazing thank You 😅😅😅😅😅

@creationholic101

9 ай бұрын

Thank you too!

Eric de France. Super je découvre, moi qui fait beaucoup de modélisme ça va bien me servir surtout que ce sont des ingrédients facile à se procurer. Un grand Merci. 👍👍👍

@coyote1311

Ай бұрын

Je fait partie du même monde que toi, si les astuces fonctionne vraiment je vais faire de sacré économies 😅

@creationholic101

Ай бұрын

Glad you like them!

I fix the oil pan on my car with this and no more driping❤❤

Genial 👍👏

thank you for your videos, love them. The technique used for the gear was genius & Clever (Brasil)

@creationholic101

4 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Excelente dica! Fortaleza -ceara! Brasil!

@creationholic101

9 ай бұрын

Hello. Thanks for your positive feedback. Wish you all the best

very creative, bro, the glue results are perfect and strong like this

@creationholic101

9 ай бұрын

Thank you very much!

Thank you from Poland

Excellent work and would have saved me a lot of trouble if I had known

@creationholic101

6 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Desde León España , lo había probado con cianocrilato y bicarbonato

貴方は天才です😊 このギヤの型取り方法は、とても参考になりました❤

@creationholic101

3 ай бұрын

I'm glad you enjoyed this project! Feel free to connect with other viewers in the comments section and share your results. It's always inspiring to see what everyone creates

De argentina!, Gracias por compartir todo este conocimiento!, 👏👏👏👏👏👏👏👏

Super Idee 💪🏻💪🏻danke für den Tipp. 👍🏻 LG Martin 🙋🏻‍♂️

@creationholic101

8 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

玄関のサッシが外れたので、この動画を見て修復できました。この考え方は凄い。

@creationholic101

8 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

De Argentina, voy a probarlo

Trop cool la super glue 😀

That is brilliant. Will try it on a dough mixer. From Cyprus

@creationholic101

20 күн бұрын

Glad you like them!

From _Belo Horizonte/BraSil_ Very good ideas!!! Congrarulations!!!

@creationholic101

8 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

danke für die guten ideen aus Rumänien

Senin gibi yaratıcı insanları severim.harikasın Türkiye den

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Muito bom!Inteligente.

@creationholic101

9 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

@gyulakerner8252

9 ай бұрын

​@@creationholic101❤❤❤❤❤❤ Ft

Se ve interesante tu idea trataré de ponerla en práctica y después daré mi opinión, gracias.

@soportecovein221

29 күн бұрын

yo he probado el bicarbonato y funciona. el que no he probado es con el lápiz pero lo haré.

@creationholic101

26 күн бұрын

I'd love to hear if you've tried this idea yourself or if you have any other creative suggestions to share

Une excellente idée de bricolage. Merci de l'avoir partagé.

@creationholic101

5 ай бұрын

Hello! I am very happy to read your comment. Have a good day!

Not surprised, thanks for the heads up!

@creationholic101

4 ай бұрын

Thanks so much for watching our video. Wish you all the best

A superb demonstration from you. What is the difference from using baking soda, verses baking soda with the graphite power and super glue? Thank you.

@creationholic101

6 ай бұрын

it's sturdier

@stewartbruce8902

6 ай бұрын

Thanks for your answer.@@creationholic101

Anyone ever test super glue with graphene powder?

@elauxiliarx

7 күн бұрын

Graphene powder is the same powder from the pencil... right?

@bradysimmons84

7 күн бұрын

@@elauxiliarx No. That's Graphite. They're similar. Graphene is a newer discovered substance, and has waaaaaaaay stronger properties.

Veo tu vídeo desde España, probaré tu idea. Gracias. Me suscribo.

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Hiệu quả và chắc chắn với cách làm của anh. Tôi ở Việt Nam rất thích anh chia sẻ ❤

@creationholic101

8 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

@uckhai-othicuocsong

8 ай бұрын

Cảm ơn anh

Que imaginación!!! Soy de Zaragoza, España

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

ممتاز انا اتعلم منك بعض الاشياء الهامه شكرن على مجهودك الرائع

@creationholic101

26 күн бұрын

Glad you like them!

入手不可能になったプラスチック歯車の修理ができるなんてすごいです。 ただ、もうほとんどプロの仕事ですね。 It is amazing that you can repair plastic gears that are no longer available. But it's almost a professional job.

@creationholic101

8 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Ottimo molto professionale

Nice video!!!. Greetings from Spain

@creationholic101

8 ай бұрын

Hello! thanks for your comment. Wish you all the best!

wonderful ideas , however what is cyanoacrylate please explain its composition and strength , thanks and God Bless you for Shearing your wisdom and knowledge .

@mymai5859

10 күн бұрын

Super glue

Ciao! Troppo bello e funzionante! Grazie, Fausto (Roma, Italia) 26-07-2023

@creationholic101

9 ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like my ideas. Wishing you all good things!

Ben Türkiye'den yazıyorum. Gerçekten süpersin. Seni tebrik ederim. Çalışmalarında başarılar dilerim. E.GUNES

@creationholic101

6 ай бұрын

Hello, you are so kind to leave me a comment! If you have any other better ideas, please share them with me! Wishing you health and happiness always!

Amazing technique, Very nice thanks for this great idea

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

Saludos desde España. Alucinante tus reparaciones e ideas.

@creationholic101

3 ай бұрын

Thank you! Cheers!

felicitation de France

Kỹ thuật hay và hữu ích. Thanks

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

It's verygood👍

Merci ❤

@creationholic101

24 күн бұрын

Thank you! Cheers!

👍👍👍Mükemmel...

احترامي و تحياتي من المغرب 🇲🇦❤

Amazing. Cool to get the graphite/graphene from the pencil

@creationholic101

2 ай бұрын

Thank you! Cheers!

Walter - Florianopolis - Santa Catarina. Muito bom esses experimentos.

@creationholic101

5 ай бұрын

Hello! I am very happy to read your comment. Have a good day!

Tokat'tan. Güzel emeğine sağlık.

@creationholic101

9 ай бұрын

Hello. Welcome to my channel. Thank you for your feedback!

Υπέροχο ευχαριστούμε πολύ

@creationholic101

6 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

Jestem z Polski.....swietny pomysł

@creationholic101

9 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

Thank you

@creationholic101

8 ай бұрын

😍😍😍😘😘😘💕💕💕

Harika olmus, cok begendim👍. Abone oldum. Rusyaliyim. Ahiska turkuyum.

@creationholic101

Ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

تعمیر چرخ دنده خوب بود 👏👏👍👍

Excellent Bravo 👍👏.

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

Great job ❤

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video

Thanks alot. beacuse teach me about this important team.

@creationholic101

5 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

¿Sirve para el vidrio?

This idea to use graphite with baking soda will be great. I'm in drag racing rc, and you need to stiff the arm to make less flexible. This idea will help a lot and don't need to spend to much metal with I can make the arm more durable and stronger for fraction of the cost

@creationholic101

Ай бұрын

Glad you like them!

Than you from Hungary

@creationholic101

4 күн бұрын

Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best

good idea

@creationholic101

9 ай бұрын

Many many thanks

Been looking for this account...appreciated thanks

@creationholic101

5 ай бұрын

Glad I could help

Excelente

@creationholic101

8 ай бұрын

"Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things! "

The one beginning at 4:05 to the end. I had to laugh to keep from crying. Brilliant. If my life depended on me thinking of stuff like this I’d be long dead.

@creationholic101

20 күн бұрын

Thank you for watching

انت رائع ..اتابعك من ليبيا👍

@creationholic101

6 ай бұрын

Hello! Welcome to Creation Holic channel. I am very happy to read your comment. Have a good day!

Kind regards from The Netherlands, Europe !

@creationholic101

Ай бұрын

Hello! Welcome to Creation Holic channel! I am glad you like this ideas. Wishing you all good things!

You the best

Great...Now let's see the gear in operation under load.😁

Muy inteligente, felicidades y gracias por su inventiva

@creationholic101

6 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

Jeniusssss

@creationholic101

9 ай бұрын

Thank you for your comment. Wish you have a nice day!

От България гледам...😊♥️

Thật là thông minh ! Rất tuyệt vời !

@creationholic101

4 ай бұрын

Thank you! Cheers!

SUPER , MERCI

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Thank you so much for your support

wow, i think i learned something...

@creationholic101

8 ай бұрын

Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful

شكرا لك على تقديرك لمشاهديك .

@creationholic101

6 ай бұрын

Welcome to Creation Holic channel! Hope you have a good time while watching the video