Most dangerous high speed run to date. Maybe. Back by popular demand, GO-PED SHRED (The finale)
Автокөліктер мен көлік құралдары
Due to popular demand, the GoPed is back and more powerful than ever!
Benny leathers up and gives the handle bars a squeeze to find out exactly how fast this little scoot scoot can go.
Plus, check out the progress on the Great Wall manual swap gearbox project with it's new Toyota parts in it, ready to bolt into the crown.
BCW Parts + Merchandise:
www.bennyscustomworks.com
Perks & Extras on our Patreon:
/ bennyscustomworks
Socials:
/ bennyscustomworks
/ bennyscustomworks
Sparesbox:
sparesbox.com.au/bcw
Benny's Custom Works brings you everything automotive!
Weekly Episodes right here on KZread, as well as the shop with new & used performance parts for most Japanese makes and models.
Benny makes this stuff look like a walk in the park. Please consider the risk factors and talk to a qualified mechanic, as well as a psychologist, if you’re thinking of attempting anything you’ve seen on the show.
Take into consideration your safety, the safety of others, as well as your vehicle’s best interests- warranty, etc.
Unless you’re trained & qualified to do so, we don’t recommend modifying your vehicle in any way. Stickers don’t add HP unless installed correctly.
Пікірлер: 107
I really like how Gian is speaking more and kind of asking questions to get Benny to talk about what is going on, love ya work Gian
@NeverLetOff
3 ай бұрын
Same
😂😂😂 that voice over..... gold 👏
I like the scooter content. And there has to be a 3rd episode. We didn't see Giann on his.
I'm here for the scooter content and to support you doing whatever makes you happy
We need comparison with the pipes, carb tuning and top speed run with Giann on both scoots. World's Greatest GoPed channel! There's no end to this Saga until 60 km/h
So glad to see the safety gear come out. you doing what makes you happy is really cool too. Keep up the great content guys.
@adrianzmajla4844
3 ай бұрын
Safety shorts!
Giarn best voice over ever, absolute gold, well done
We need a third episode. More scoot. Also the next time you're in Christchurch I'll shout you a beer 🍺
I had one of the fastest Bigfoot Goped…28cc bigbore kit with 1mm stroked cranked with stuffers , juice box..And it had a 1inch drive with lock down kit… 70kph ..I had shocks on the front with motor bike style front tyre…I rode it as a vehicle for a few years until the highway patrol hated me …
I totally blame Benny for taking the gearbox to the gearbox guys, I also would do the very same - there is far too much wizardry and magic that occurs in there for my tiny smooth brain to understand enough to risk the worst case cost. There be dragons. Edit : Haha that voice over edit was legit. Eleventy out of ten Gian!
Big fan of Gian’s step up. Love it. You guys should get Al to hold the camera. I hear he's nearly outta youtube frontman work.
Thanks for the video. This is the number one scooter channel, we need episode three with nitro fuel. We need face cam of Gian still. This was fun thanks.
‘I for one am outraged’…gold. 😂
The banter is soooo good!
There actually are efi twostrokes, the evinrude etec outboards are a nice example with direct injection oil/fuel.
sweet breakdown on camshaft detail guys. Excellent!
Hahaha I hope we get an update one day. I used to have one and loved it. Wish my parents felt the same 😅
@BennysCustomWorks
3 ай бұрын
My Mum made me sell mine.
@jonodragicevich1286
3 ай бұрын
@BennysCustomWorks Hahaha same mate, same. It's why I'm so jealous of your wicked thing. Having the two to compare is awesome too. Keep up the awesome work, thanks for showing us it's worth following your passions. Cheers bro.
What no 3rd episode great vids lots of variety is great
Put a Yamaha KT 100cc Kart motor on a scooter frame once. Wouldn't recommend unless you want to visit the hospital.
I watch you because of the no nonsense skills you have..watching you work on anything is unreal Benny thx
So stoked to see my old steed rocking on the other side of the globe!!!😍 Keep the scooter content coming Benny!!!
I love the little side quests! Should do a z50 modified pitbike build.
2 stroke EFI - in 2018 KTM changed from carb on their 250/300EXC to an injection system and met the relevant motorbike EURO emissions standard somehow
KTM amongst others have established EFI 2 strokes. it has established the resurgence of 2 Stroke as production bike, and many are happy.
I have a Zendoah brushcutter. The best small motor I've ever had.
Loving the scooter content🙂 And Gian's input is great - keep up the good work lads.
We love the scooters. Don't listen to the haters.
I'm here for the 3rd ep
I had a similar scoot to that one except one had a aluminium plate where you stand and a Stihl chainsaw motor on the back, the highest speed I got it to was 75kmh on a straight downhill and I would never try that shit again 😂
it's always fun to watch big dudes going fast on slow machines
Gian's voice over is gold
Does anyone else remember that early, early KZread video of the scooter out running a 4th gen trans am ws6? Let's get KZread back to its roots , scooters forever
More GOPED build! LOL 46k's in the paddocks will be bananas.
Ktm have fuel injected 2 strokes. They started as transfer port injected but now the new ones are throttle body injected. Pretty cool stuff
Third ep with Gian riding it!
You should have a look in to the 46cc reed engine thay make for them
NGL I love the Go-Ped content
We need a third episode after some tuning!
Good job Benny Fixing it up the Bike👏👏👏👏👏
Great video
Great videos guys, keep up the good work
More scooter content please
I enjoyed the variety of this episode
lol have you dealt with people on a daily basis line was perfect
Efi 2 strokes yes. In the Uk we had 2004 Aprilia sr50 scooter which was efi it also had a supercharger too. Not sure if that was required to run or just some fancy emissions control system though.
@feedingfrenzy123
3 ай бұрын
It was fuel injected but not supercharged. Great scooters though! I had a 2009 Derbi GPR 50 (was the same as the Aprilia RS50) throughout school and college
@LemartesLogistics
3 ай бұрын
@@feedingfrenzy123 they had a crank driven compressor. I just had to wiki it to make sure it's kind of a crude supercharger but forced induction to run properly just like the 2 stroke detroit diesels have a blower to run properly but still classes as na.
Benny! Thank you for getting a new fuel tank, or cleaning up the old one, it was doing my head in in the last episode 😂
Nose whistle! "Breath through your damn mouth!"
I'm here for all the content EFI mod when? ;) Also, video cuts off at the end, though i think we all got the gist of it
Auto-stop on my Ridgid dakdak (same manufacturer as Ryobi) does limit the torque even though it still sounds like it's impacting. I typically only use the feature on wheel nuts and it leaves them torqued way below 80ft-lb/100Nm.
You need to find a "Go-Quad". 👌
Smash the pivot pin out of the Upright and remove the bars. There is a hex bolt in the pice that stays with the scooter. From there it is the same as a Pedal bike
To my understanding more or less duration is how wide the tip of the cam lobe is hence duration and lift is just how high up the lobe goes to lift the pushrod opening the valve gian that’s how my simple mind works anyways lol
Who doesn't love the sound of a chip packet with your audio, mmmm Chippy's, My chippy's! Ha ha! Loved the voice over! Always good for a laugh with Benny's Dry Humour. Next step, Turbo & NOS! Ha ha!
As someone who's rebuilt autos and manuals, I won't do it anymore unless it's for myself even then I'd rather not. Odds are there are few people in my city that'd do a Getrag 282 anyway. Don't fault you one bit.
Get it Benny !
Gold chats boys 🤣 more gian benny voice overs please maybe some old kung foo movie dubs too 🤣
that editing tho... well done gian.
Poor Hopko
Third episode taking it down the quarter mile
Well hey ya didn’t die
EFI does exist in 2-strokes. I believe KTM just came out with a new one recently that has great performance AND is more economical. with EFI you can chose a how much fuel you want and it can be seperate from the amount of oil, no need to ruin your octane rating by using premix. kind of a shame fuel injection wasnt more common in 2-strokes, maybe if countries want to allow internal combustion engines but ban fossil fuels for vehicles then we will see a new generation of 2-strokes with biofuel and bio lubricants.
Benny I actually got told the same thing "you look like Travis.....
So with this conversion you change input and bell house do you need a Toyota yoke or use the Great Wall yoke
And where's the Gian clip of him riding it? Gian? 😂
Yeah there are fuel-injected two strokes, not many of them though, and I don't think I've ever seen a really tiny one (I know of 125cc, 250cc, and 300 cc FI two stroke dirtbikes and that's it.)
Stihl 500i is efi. Would be a great swap for the scooter.
Scoot or die bro!
Who tf is Taylor Seift?😂 17:26
Hey big Fan, have you guys ever put a 1uz to a r150? I am building a V8 Toyota Blizzard LD20 and was after info and advise on adapter plates/kits?
So what’s the magic stick part number 😊
Look at balta scooter made in Italia top shelf they are
Sounds like a swarm of mosquitoes and bees combined.
There all engines and things that make noise.
KYM have a fuel injected 2 stroke
WOT and bam, Kangaroo 😂
Hide the bolt guy is better than add three extra to the parts table.
hahaha heck yeah I can take some credit for this one! cyber-bullying works, kids.
Auto Stop is at 120nm
Hay I’m pleased as you got help when you needed it Plenty of other would #€¥£ it up To see someone as capable as you getting assistance from the experts mate me not feel so useless for doing the same in some matters Thanks for a great episode Ben
Stihl have an injected chainsaw, the 500i
KTM have fuel injected 2 stroke engines on some of their bikes.
Please dont die 😂😂
Bro, second channel for scooter stuff
Please tell us the top speed once tuned. 5/7 content.
Did this ep just kinda, end abruptly? Or is it me.
All that cam talk was much too complicated, I'm just gonna ring up Crow and ask for a "3/4 race cam" for my otherwise dead stock 300,000 km Holden 5 litre V8. Either them, or maybe Heatseeker - I could ask them for a "Stage 5"... (shit, are Heatseeker even still around any more?)
More like Jason Kelce....
0 To 60
i thought BMW drivers just forgot to refill the blinker fluid since they never use it
Gian you spanner. You cut the end of the video too short. It finishes mid sentence with Benny talking about the ignition lead being short
Nek minnit....
If you want to ship to the real action , scooter content starts at 16-23 .. lol
Not going to be a third episode? WTF? I'm new here I started watching because I saw a scooter. 8 second card are nice and all but I can't fit the scoot content!
Who has plastic in pocket
2 Strokes are cool. More episodes on 2stroke. Just no electric scooters please.
Moist
How are electric cars better for the enviroment when using coal power to charge.If one charge power a house for 5 days.Thats a heap solar charging good.Most use the grid to charge
if you add a tiny turbo to the go-ped you will really shred.