Mosaic Tile kitchen back splash installation

Тәжірибелік нұсқаулар және стиль

Never tiled a back splash before? Jody shows us the tools, the tricks and what you should think about before starting your project. This is the best 16 minutes you could spend if you're considering tackling a kitchen back splash.

Пікірлер: 64

  • @-erm2918
    @-erm29184 ай бұрын

    I have to agree with other comments, you are an EXCELLENT teacher. Not only is the information detailed, without being over whelming, but you manner of presentation is actually calming. I think I'm ready to give it a try. (Oh, by the way, I'm 71 and this is my first go at tiling.) Thanks for the lesson and the encouragement.

  • @winnahkrazed
    @winnahkrazedАй бұрын

    Great video and pace, with good explanations!

  • @Mira-gk9vr
    @Mira-gk9vr4 жыл бұрын

    Thanks Jody. Very clear instructions....would have loved to see how you cut the indentations for the outlet and the cable hole.

  • @andysantos8286
    @andysantos82862 жыл бұрын

    The best explanation that I have found until know. Thank you for your video.

  • @jasonl5589
    @jasonl55892 жыл бұрын

    Excellent step by step instruction What a detailed explanation

  • @RipplyPig
    @RipplyPig4 жыл бұрын

    Searched for hours for a good tutorial on backsplash and I have to say you are an excellent teacher. Keep up the good work

  • @jodycybulski8530

    @jodycybulski8530

    4 жыл бұрын

    Wow, thanks!

  • @esgarlopez6052

    @esgarlopez6052

    3 жыл бұрын

    true

  • @VIncentSunflowers
    @VIncentSunflowers6 жыл бұрын

    You are an excellent teacher! Your tutorials are thorough and clearly explained. Thank you!

  • @jodycybulski8530

    @jodycybulski8530

    5 жыл бұрын

    Thank you kindly Vincent

  • @martyworksalot4168
    @martyworksalot41683 жыл бұрын

    Excellent 👌 video, well detailed. Great tutorial thank you

  • @loramcclamrock5549
    @loramcclamrock55495 ай бұрын

    very clear instructions

  • @jamesvaliquette1690
    @jamesvaliquette16903 жыл бұрын

    Great tutorial. Thanks

  • @copperfox7646
    @copperfox76463 жыл бұрын

    Very nice Great Job 👏🏽

  • @fishnlady
    @fishnlady6 жыл бұрын

    I have watched several videos of installing glass mosaic tiles and this is the best video that I have seen yet. A big huge thank you!!

  • @jodycybulski8530

    @jodycybulski8530

    5 жыл бұрын

    thank you kindly Gail!

  • @dc5325
    @dc53254 жыл бұрын

    great instructional video.......excellent teacher. Thanks.

  • @jodycybulski8530

    @jodycybulski8530

    4 жыл бұрын

    Glad it was helpful!

  • @oro5z
    @oro5z3 жыл бұрын

    Great video! Easy to understand well done. I'm now motivated to do my own backsplash. Thanks so much!

  • @stabby463
    @stabby4635 жыл бұрын

    Great instructional video! Tools, prep, problem resolution when they come up and all of it very clear and easy to follow. Thanks very much.

  • @jodycybulski8530

    @jodycybulski8530

    5 жыл бұрын

    Thank you Mike, your comments are appreciated,. Hopefully we could help you in a small way.

  • @liljoker8803
    @liljoker88034 жыл бұрын

    AWSOME VIDEO SO CLEAR N PERFECT TUTORIAL THNKS 100x

  • @jodycybulski8530

    @jodycybulski8530

    4 жыл бұрын

    Glad you liked it

  • @barbarybar
    @barbarybar Жыл бұрын

    All those old fashioned imperial measurements are doing my head in.

  • @shane3996
    @shane39962 жыл бұрын

    Great video. Did your space your first row off the countertop, or are the tiles touching the countertop?

  • @brianskellenger9344
    @brianskellenger93442 жыл бұрын

    Is there grout used?

  • @medicmike4906
    @medicmike49064 жыл бұрын

    Another option is a laser line, that way you can get rid of that chalk line.

  • @JodyCybulski

    @JodyCybulski

    4 жыл бұрын

    Thanks Medic Mike that is a great alternative to a chalk line if you have a laser line too!

  • @rajeshamazaakaaa
    @rajeshamazaakaaa4 жыл бұрын

    Hi..thanks for the video..when I’m applying the Mosiac tile I’m running into the situation where I have to cut along the length. Is it advisable to cut along the length ? Or should I increase the spacing between tiles and grout it ..

  • @JodyCybulski

    @JodyCybulski

    4 жыл бұрын

    Hi ra gu. I have cut along the length of the tile at the top and bottom rows of tile. It works fine but you should go slowly to prevent glass mosaics from chipping or splitting. You can increase the space between the tiles if you wish, to avoid this but I prefer to use my chosen spacing and stick with it. I would use a sharpie to mark the line and follow it as glass mosaics with backer shift as you push them through the wetsaw. Or you can follow it with an angle grinder. Note that if you have a completely level counter, you can start the first course, one grout width above the counter so your only cutting is up underneath the cabinets where the cut line is somewhat hidden. Have fun

  • @serafinflorendo340
    @serafinflorendo3405 жыл бұрын

    I like your instructions, I just have a question about setting out the electrical outlet. How do you adjust the depth of the outlet to the tile?

  • @JodyCybulski

    @JodyCybulski

    5 жыл бұрын

    Hi Serafin, You loosen the screws, then pull out the electrical and set the tabs of the outlet on top of the tile.

  • @rustjunky764

    @rustjunky764

    4 жыл бұрын

    They also sell spacers to put in between the receptacle and the box. They work really well to bring out a recessed receptacle

  • @glennda5id
    @glennda5id4 жыл бұрын

    I am installing a marble mosaic backspalsh. Sheets are ~12x12 and 4.5lbs each. Do you recommend back buttering the sheet in addition to putting mastic on the wall?

  • @jodycybulski8530

    @jodycybulski8530

    4 жыл бұрын

    Hi Glenn. I would not back butter the small tiles. I would just place it in the thinset on the wall. Good luck with your project.

  • @rzu7120
    @rzu71202 жыл бұрын

    I just bought some mosaic tile similar to yours. The instructions on the tile say to spread the mastic on the wall with a 3/16 x 3/16 trowel, then use the flat side of the trowel to spread the mastic evenly on the wall, and also butter the back of the tile with mastic. Does this make sense to you, to put mastic on the wall and the tile?

  • @jodycybulski8530

    @jodycybulski8530

    2 жыл бұрын

    R Zu, yes you can add the thinset on the back of the tile too. but I would not drive it in too far or it will come through the front of the tile. I would only use the notched side to final spread the thinset on the wall. The flat side won't allow you to place the tile "into" the thinset. as noted in earlier comments use thinset on glass tile. mastic won't dry easily in some cases.

  • @EdStaniszewski
    @EdStaniszewski2 жыл бұрын

    Hi, im starting my very first mosaic tile install on my kitchen backsplash. Just a few noob questions. Is there any particular reason you started on the right , open ended side opposed to the left corner? Also the place im buying tile is pushing a grout with sealer mixed in. Is mastic a better choice for beginner than thinset? I have glass and what looks to be aluminum for my tiles. When you stop for the day, how do you mastic the last pc?

  • @jodycybulski8530

    @jodycybulski8530

    2 жыл бұрын

    Thanks ES. There is no reason that I started on left or right, I just choose the exposed outside to start on and work in to closed corners. grout with sealer is a good idea. Use it carefully some of it dries really fast!. Mastic is not good for glass and you should use thinset for glass. Yes mastic is easier than thinset. its premixed most of the time.

  • @jodycybulski8530

    @jodycybulski8530

    2 жыл бұрын

    And good luck with the tiling!

  • @EdStaniszewski

    @EdStaniszewski

    2 жыл бұрын

    @@jodycybulski8530 We are finished laying in the thinset. It looks fantastic! Its like a big puzzle and wasnt bad at all to cut on my crappy 7" blade wet saw from HD. They were glass and aluminum linear tiles on a mesh mat. I bought a Pearl P4 blade and had no problems at all cutting around 4 outlets and a window sill. I wish i could post a pic. , goes great with our quartz counter tops.

  • @tellmaster207
    @tellmaster2075 жыл бұрын

    Strike a pose let’s get 2 it

  • @theactualBDG
    @theactualBDG4 жыл бұрын

    Watch out deployed guys. Jody has taken to home improvement to get at your girl!

  • @JodyCybulski

    @JodyCybulski

    4 жыл бұрын

    I have too many girls already... LOL. But thanks for your suggestion A Orelup

  • @theactualBDG

    @theactualBDG

    4 жыл бұрын

    @@JodyCybulski "Jody" is the mythical guy that steals military guys' wives/ girlfriends while they are deployed/ at basic training/ etc.

  • @marcopoulin1897
    @marcopoulin18974 жыл бұрын

    What pro no protection on conter top men who teach you

  • @bluejaystudio2029
    @bluejaystudio20295 жыл бұрын

    No mastic for glass tiles!!!

  • @jodycybulski8530

    @jodycybulski8530

    5 жыл бұрын

    Thank you Jerry, you are absolutely correct. I have just learned that Mastic is not the optimal adhesive for glass. Mastic doesn't completely dry behind glass. One should use Polymer Modified Thinset, which is sand cement and additives. They don't rely on evaporation to cure, but rather a chemical reaction. It is great to learn new things from you Jerry. Thank you.

  • @R2sojr09

    @R2sojr09

    4 жыл бұрын

    Jerry J it can be used aslong as the back of the glass is painted to avoid seeing the yellowing and it’s not in a bathroom or floor. It will hold fine once your done grouting and such. Still thinset is preferred

  • @JodyCybulski

    @JodyCybulski

    4 жыл бұрын

    @@R2sojr09 thank you for that clarification. As you say, still thinset is preferred.

  • @dennisalvarez2518
    @dennisalvarez25182 жыл бұрын

    I thought your video was very informative, not to mention your absolutely handsome 😜!

  • @Brooklynraised68
    @Brooklynraised684 жыл бұрын

    Next install doors on your cabinets 😂

  • @vitomancini8647
    @vitomancini86474 жыл бұрын

    Everyone should know never to use mastic with glass period !!!!!!!! this guy has not done his homework and this video is so misleading and wrong never ever use mastic with glass

  • @vapdivrr5656

    @vapdivrr5656

    4 жыл бұрын

    So what will happen if you use this mastic? I have heard to not use mastic with glass, but what are the consequences? It seems this glass has a white backing and the mastic is pure white, so it seems that it wont show thru. Will it pop off the wall?

  • @JodyCybulski

    @JodyCybulski

    4 жыл бұрын

    @@vapdivrr5656 Thanks, no the tile will not pop off the wall. The mastic is not supposed to be used under glass as they say it will not dry. That is debatable with mosaics that are painted on the back. The water in the mastic will dry slower because the glass seals it. But because of the small size of this mosaic tile it will dry over a slower period of time. If you want the optimal adherent for glass tile use white thinnest, not mastic. There is a good brand called ultralite from mapei that mixes like cream and it great at holding up tiles on the wall. Have fun with your project.

  • @petergraham4666

    @petergraham4666

    3 жыл бұрын

    White thinset does not rely on water drying. Thinset sets by chemical reaction and is also much stronger.

  • @LuisHernandez-od1qp
    @LuisHernandez-od1qp4 жыл бұрын

    Bad work cutting around outlets

  • @jodycybulski8530

    @jodycybulski8530

    4 жыл бұрын

    thanks for the feedback Luis.

  • @Tom-qn5nd

    @Tom-qn5nd

    3 жыл бұрын

    Not sure what you mean, how do you cut around and outlet?

  • @marcopoulin1897
    @marcopoulin18974 жыл бұрын

    Talk to slow n work to slow

  • @ianmiddleton1877

    @ianmiddleton1877

    4 жыл бұрын

    Marco Poulin agree, we’re not completely dense.

  • @nateowings510

    @nateowings510

    4 жыл бұрын

    I agree, and loves to say the word mastic 🙄

  • @theactualBDG

    @theactualBDG

    4 жыл бұрын

    I like his approach. If it's too slow for you, you can speed it up!

Келесі