Watching this while the tornado sirens are going off. Priceless

@tterryshenanigans1820

25 күн бұрын

Hope everything is alright. Praying for y'all from NY.

@nickgraves7049

25 күн бұрын

Well dam!!

@davidborboa77

25 күн бұрын

Five hours later hope you're still there brotha.

@brockryan3405

25 күн бұрын

@@davidborboa77 crickets? Not cool man! Tell us you are okay!

I got faith in you guys you'll figure it out it's probably the simplest stupidest thing you can think of good luck love the show

I would suspect spark plug wires and firing order from the way it sounds, but start with the basics and check compression first. If compression is good on all 8, then use a timing light and check every spark plug wire to make sure it's firing. Also double check for any vacuum leaks. When you finally figure it out I bet it'll be something simple, just a pain to find out what it is. Good luck!

Mike, make a small skateboard for the turtle, its awesome.....think turtle turbos... The video i saw was a small turtle on a finger skateboard... Turtle was chasing the dog around having the time of his life...

I love the trailer build! The big block issues is something every one of us would have had so it feels like I'm in this with you! You guys are awesome.

@brockryan3405

25 күн бұрын

Mike does a great job filming solo. I can tell what he is doing.

For future projects. If you drill the panels and the Roof before you put your sealings on, you won't nacharel. Your drill bits up with sealant, Can't wait to see finished

Try an elastomeric roof coating over complete roof. Snow seal or equivalent. It has 300% stretch and made for it. Thanks for another great video guys..

Nice job on the roof patches Mike. By using both sealer and rivets, you lessen the chance of the patch moving during transport and cracking and leaking. Going down the road, these campers just flex and warp and vibrate like crazy. Never ride in a moving camper. It's nutty.

I can't wait til the camper is finished.

@brockryan3405

25 күн бұрын

But then what will Mike engineer? I'd prefer he continue to make it amaze-ballz

14:28 check and see if you have a tight value setting

Thanks for the shout out!!

@dirtbillydeluxe

25 күн бұрын

You bet!

Nice work on the camper Mike. Shawn - may be time to try a 12 valve 😂

Mike and Shawn!!! Great video.. Camper coming along and Shawn's truck will get there. You guys always do

18:01 check for vacuum leaks around the intake -- throttle body and do a compression and see the numbers ..... also check and see if the cam shaft is not flat in spots

@bradywilliams2666

25 күн бұрын

This. Also is that a 454 TBI or 350 TBI? The 350 TBI is smaller and does not match the factory adapter correctly. Leaves a big air leak. I'm assuming it's a factory 454 TBI truck since you have the adapter.

Hey look guys! Diesel Dave drove down to help out the Dirtbillies! What a guy, huh?! hahahhaa!

Watching, It's 106 here today, this video is from the 4th, 5 days ago. good luck on the engine problem. Blessings to you and yours

Mike when you get the camper done, everyone is going want one.

I know you just glued that sheet in although a max air fan does wonders. Love this project

Great work and fun video! Shawn don't be so hard on yourself, you turn junk into useful things every time! Mike, your perseverance is commendable! Good job!

Another great vid Shawn & Mike its a working progress, thanks for sharing, Jon UK

Mike, let's see some video of your tortoise. LOL. Turtles are cool

@christophersells9146

25 күн бұрын

Take it in a Ride with you guys and do Shots of it in different places..lol 😂

Put a HEI and carb on it and see if it is good or not! I watched the last video and it looked pretty good in side

Mike, you gotta introduce us to the tortoise! Lol

Thanks for sharing ! A bummer about the Engine !

Mike: Ask Santa to bring you an air riveter.

Great day at the shop, I remember those days , only one or two more things, next thing your done, and its 2 in the morning

GOOD JOB!

Sounds like the cam is too hot for the motor. 😁 Even that lap seal stuff doesn't last forever. When it starts looking old, instead of ripping off the old sealant, I just brush Flex Seal Paint over it. My trailer is now 10 years old and still no signs of water intrusion.

All your and rorys fleet need to have front bumpers that are 10 wide to stand on when working on without falling on your faces

Sean You never have a problem if that was a Ford engine in it👍🏽🤙🏽🤟🏾🤷‍♂️😎🙋🏽‍♂️💪🏻💪🏻

@christophersells9146

25 күн бұрын

Really....

The injectors are spraying way too much fuel into the motor at idle. They are probably sticking open and dumping fuel into the motor. If you pull the plugs, they should be wet with fuel. You can probably have a local mechanic that has an injector cleaning setup disconnect the fuel line and run injector cleaning fluid through them to clean off the varnish build up. If you plan to run fuel injection no matter what (ie, atomic), you should run a 195 thermostat in the motor, because all modern fuel injection setups use 200 degrees as the turn on point for closed loop operation. If the fuel injection doesn't see this, it will never go into closed loop, which means it will run full rich. The result is your fuel mileage will REALLY drop, the motor will never run right and the cylinders will wear prematurely (excess fuel washing the oil off of the cylinder walls). I know the tendency is to run a 180 (or 160) thermostat given where you live to keep the motor as cool as possible, but it is a bad idea because the fuel injection system won't go into closed loop.

You know when someone is making too much money they stuff a big block in the truck 😂. Or got a new gas card at Texaco 😅

VICTOREE the Big Block is running.

Shawn, we have all felt that frustration before.

TBI FOR THE WIN.. low hp but never really fail. Run upside down

That is a cool stubby ranger

I hated when I worked on a truck and it didn’t run right. I never had the patience that Shawn has tho. I snorted and cussed a lot. I like that camper

That truck is a monster 🤘😁🤘

Desert tortoises 🐢 are snack food for dimondbilled rockpeckers.

I think you should find an old school 427 out of an old chevy farm truck and put in there.

Maybe put a bedliner product for the roof of the off road camper

great as always great content very entertaining

That rig sounds jinxed 😒 might just be the fuel,or injection system, hope you can work it out,thanks for sharing, all the best to yous and your loved ones

Sean: I always start twitching when I see youse guyz running a motor with no coolant. Doesn't take much to break a ring.

I could hear low compression in one cylinder when you where cranking over. Compression test for sure.

Did you check the cam lobes? Could be a cam all worn out and rounded. Stick to the basics. Fire, fuel and air. Than go from there. Squirt some ether to see if you have a vacuum leak some place. Just throwing it out there to help.

Hope you get the motor situation figured out soon and it runs for more than a year.

It's all progress. 🍻

I would try a carburetor on it to see if that helps... Try a different distributor. I don't know the history of that one. Start with the basics.

With the 'new' motor. Have you checked compression and checked for leaks? If there's burnt wires, you need to pull them all to replace. At least they need to be checked. MSD Atomic are owned by Holley, the atomic and sniper look to share a lot of bits. (Not to self, do not let Shawn work on engines.)

Nothing worse then a " miss " you cant find Shawn. Sucks. But you got this 👍

Instead of that goop you should have used duraglass on the roof (or tiger hair)

You'll get it ..probably something stupid....the trailer is going to be rambo tough

Get ya some flex-seal for your camper roof. It does work

Great video

Take the big blocks apart and build one!

I am so happy you are not aircraft mechanics, as I am

@danielkingshott2659

25 күн бұрын

Lol, 😅 think they'de fit in pretty well in Renton.

@3.0colorado21

25 күн бұрын

Maybe a good fit at Boeing

@dennispalmer6007

24 күн бұрын

This is an old truck built with used parts. It’s not designed to leave the ground so as long as it goes, stops, and steers that all he needs. Oh and by the way he doesn’t have the budget that you have.

@3.0colorado21

24 күн бұрын

@@dennispalmer6007 it is hilarious seein some of these comments. They're building rock, bashers and cool, custom classic trucks and shit not airplanes. Ain't nothing needs to be precise, it just has to work, look cool, and not break lol.

Hey Shawn put a Ford Engine in it lmao just kiddin. I think Mike's idea about the wiring could be the problem. Thanks for the video guy's can't wait for the next one.

@Shawn Is that the 454 throttle body,? Because big block and small block use different injectors. And i don't know which throttle body adapter you have but some do have a passage way threw that would cause a vacuum leak , if not plugged. And Never getting down to proper idle is likely a vacuum leak. Slow to get down to idle could possibly be a failing or dirty IAC (idle air control) motor. If it helps, think about it as a computer-controlled vacuum leak. You might try removing it and see if the tip is dirty, clean just the tip of it with a brush and some carb cleaner, but be very careful to not get carb cleaner down inside the IAC or you'll kill it. Also be careful not to move the position of the pintle (tip.) Look inside the TBI where it goes and clean any crud from the IAC seat inside the TBI. You can watch the IAC work while it's installed, by looking down at the TBI unit with the air cleaner off. My next suspect might be the throttle position sensor - TPS.

@MichaelSmith-jv7zm

25 күн бұрын

I just watched the end. There is a big possibility that there is small block injectors in it. Even the ECU is different between small block and big block. Well the chips are different and can easily be changed. Wrong injectors can ruin an engine, and so can't wiring that's junk and cutting down amperage.

@bradywilliams2666

25 күн бұрын

It's not only the injectors that are different. The 454 TBI is has bigger bores. 2" compared to IIRC 1.5". So a 350 TBI doesn't work on a factory 454 adapter.

It’s a Chevy!!! So glad you guys made for affords the Dodgers and Toyotas figured I’d take a swing at the Chevy people sorry you got bad motor get another oneOr fix the one you got whatever it takes we’re gonna line enjoy your show Eric

Just fixed my boys it was running bad

There's a huge air leak into the manifold if you did not get that sensor fully installed.

Love that camper

I would check all your vacuum leaks that would cause a misfire

Hey Dirtbilly Deluxe! I really do want to give you a whole bunch of money to do a commercial or something but I don't have a product or business to advertise and I don't have a whole bunch of money! I hope that's ok! Big respect for the top quality vids you provide! Ride ride ride!

That engine doesn't look like it's going to use much fuel at all, probably less than a Prius.

I would do a compression test and if you don't have a bore scope they are super cheap should give you a idea how that engine is mechanically definitely fix those burnt wires and you can always swap a carb on see how it runs

But if you had the money for an MSD you'd spend it on the 4 Lug anyway, better to get a Dirtbilly Fan donation 👍😎✊

Frustration is fine as long as you don't send anything through the truck.

Somethins up with the Terminator Brocollii injection

@bradywilliams2666

25 күн бұрын

Someone watches too much VG.

HELLO MIKE AND SHAWN I really love your show can you do more new show for all of us please we will be waiting for you ok I will always praying 🙏 for 🙏 you Mike 🙏 and Shawn ok please 🙏 be careful out there ok 🙏 please be safe ok so you get home 🏡 to your family and friends ok 🙏 you 🙏 have a wonderful day and have a good night and day ok I have been watching 👀 you as soon you come on ok love Lorilee xoxoxoxox 🙏 😊 😀 ☺️ ❤️ 💙 🙏 I really love your smile 😃 😊 keep on smiling 😃 😊 🙂 ok

😎😎😎😎😎😎😎

Put a 460 in your chev

You mean you guys still have a lake out there wow

Visually... I see a GIANT vacume attachment @ the throttle body base plate wide open...just sayin ;)

@SkunkPresant

25 күн бұрын

Isn’t that the carb heater? Not that I would know…

@robneikirk8242

24 күн бұрын

@@SkunkPresant Carb heater...never heard of that before?...intristing...

Wow big block But you may have a problem Look at your video showing the throttle body Way too much fuel flowing through I want to come to Moab to go wheeling with you guys

The problem is that your truck is identifying itself as an 84 Yugo that was built on a Monday morning by workers who are badly hung over or still drunk from partying with the Russian hockey team during the Olympics!!!😂😂😂 that's my theory, and I'm sticking to it!!!

😅take it to chads

Shawn ,have you been getting your motors from Paul @ FabRats after he has worked on them ?

👍🏽👍🏽

You will get there … keep tyding up that wiring … or build Chad a smudge pot

It sounds like timing to me what are you swapping that was on the old engine. Bad dizzy coil🤔

👍👍👍👍👍👍👍

The spray from the throttle body looks off . The spray seems too intense . I'm sure you'll get in going better.

Just slap a carb on it to get it running then you will know it is the fuel injection

🤟🤟🤟🤟🤟🤟🤟

Cause it's a chevy

If Mike says that the wiring is questionable then it's really sketchy 😮

Byeeee

I wood say time for. A LS swap!

💖💘💖

Possibly a bad lifter would be my guess, a couple of them didn’t look great in last video.

Mike, why did you take out the roof vent? Have you never seen a WWII Prisoner of War movie with "The Box"?

@dirtbillydeluxe

23 күн бұрын

One less hole in the roof!

Put some diesel in it. Or not.

Are you and shawn like part owners of moab motors trail mater?

@helixhippie

25 күн бұрын

They're lucky to own the clothes they're wearing. Life is so much easier and better that way. 😂😎

Screw cab shlong box 👌

So was that a 350 tbi truck and you swapped it to a big block

Yoo

Sounds like it's a tooth off?

Sounds like the timing is off 🤷