I'm giving away this handmade knife at 3000 subscribers: kzread.info/dash/bejne/lYJrrNqSaNa5Z9I.html

Thats a beautiful little knife. Well done.😊👍

I've never seen a fingering like that, but you never learn from great work. Greetings from Germany

Beautyful knife from México at Your work

Good job, I have not seen that before.

Nice and beautiful! Thanks for the idea and tutorial!

@VahidCullsberg

2 жыл бұрын

Thank you and you are welcome. Thanks for watching 🙏

Well done. Really appreciate the ingenuity and thought process.

Beautiful idea. I love seeing new ways of doing inlays. I love the way that you used the file to rub the glue into the bark, as it uses the antler dust to fill in any small gaps. Mabe a tip you can use is when you glue the blade in. tape the blade to the point where the handle will meet it, and also tape the front of the handle and trim the hole. this way after gluing, it is very quick to clean up the glue by removing the tape. Great video.

@VahidCullsberg

2 жыл бұрын

Those are great tips! I'll definitely implement them. Thanks Tom. And yes that's exactly why I used the file to rub in the glue with antler dust glue 😊 It really worked out well

Perfekt

museum quality knife and workmanship.

@VahidCullsberg

Жыл бұрын

That's very kind of you.

Excellent job....great video....keep up the great work. Marry Christmas from Washington State :-)

@VahidCullsberg

2 жыл бұрын

Thank you kindly Mike! Merry Christmas back from us in arctic Finland 😊

Класс.

That is beautiful! A great video to start my day with.

@VahidCullsberg

2 жыл бұрын

Thanks Elijah, glad you enjoyed it and thanks for taking time out to watch it 😊

Amazing and beautiful !

@VahidCullsberg

2 жыл бұрын

Thank you Ans 😊

Good effort but long working hours, very cold but I think the result did not do you justice. Perhaps the inner hollow part of the horns did not allow you to escape the tubular shape of the handle. Of course, I express my personal taste.

Great work 🔥nice design great knife great made👍🏻👍🏻👍🏻

@VahidCullsberg

2 жыл бұрын

Thank you very much Michael!

Hey old friend, this looks pretty good as usual!

@VahidCullsberg

2 жыл бұрын

Thanks Mark. I'm glad you like it

Very artistic Vahid and I am only half way to the finished product

@VahidCullsberg

2 жыл бұрын

🤣 better save your compliment till you see the result...maybe I'll mess it up hehe. Thanks Richard

Я бы бересту склеил на бакситку а потом обрабатывал по месту

Thank you so much for this video. I really enjoy making the puukko style knives. Most of the time I use wooden wedges inserted vertically on each side of the tang. Is there an advantage or a weakness doing the handle this way? Very skillful and creative handle treatment with the birch bark! By the way, do you forge your own blades or where do you obtain them? I forge mine from antique buggy springs, sawmill blades and antique files. Have a blessed day my friend.

@VahidCullsberg

Жыл бұрын

Hi Richard, thanks for your kind comment. I think as long as the tang is firmly and tightly fixed and doesn't have room to vibrate when hit or dropped it should be fine. I'm just learning to forge and plan to make videos about it. I will certainly need input from a more experienced person like yourself to help me through this new chapter in my knife making. Uptill now I have bought me blades at puukot.fi Thanks for the greetings as well 🙏

@richardtrumbo164

Жыл бұрын

@@VahidCullsberg Hello Mr. Cullsberg. May God be our purpose and power today. Thank you for taking time to reply to me. I am certainly still learning how to forge, and I expect that to continue. I use mineral coal and my forge is a hole in the ground. One thing I need to remember is not to forge too thin. I like to forge to shape as much as possible, but I try to leave my blade edge just a bit thicker than a dime so it does not warp as easily when I quench it in vegetable oil. When the blade turns black in the oil but is still hot I look for straightness real quick and then I put it between two very heavy solid concrete blocks or put it in my blacksmith's vice. This usually controls most warping. It also is important to put the same amount and heaviness of hammer blows on each side of the blade as much as possible. Try to leave your blade tip thicker and longer than you need. You can grind it down later and it will not tend to warp as much. When you are getting ready to Quench harden your blade you can use a magnet to see if your blade is non-magnetic, which is a pretty god indicator that it is hot enough to quench. Make sure the blade temperature is rising to magnetic and not coming back down to magnetic. Hey, that was probably more info than you wanted!🤐I am getting ready to make a trap spring knife with moose antler handles for a friend. Any tips you can give as I have not worked with moose horn before. Have a blessed day, friend.

@VahidCullsberg

Жыл бұрын

That is indeed some juicy information. Thank you Richard. I'll reference this as I proceed.

Unbelievable good!!! First time see handle like this!!

@VahidCullsberg

Жыл бұрын

Thank you very much. I'm happy you liked it.

So, where do I find you items for sale ? Nice craftsmanship!

@VahidCullsberg

2 жыл бұрын

Hi, I put them up for sale with each video and you can check the availability on instagram @cullsberghandmade

@ItAintMeBabe99

2 жыл бұрын

@@VahidCullsberg Thanks for the reply. Not everyone has instagram, such as myself. Oh well ! Thanks anyway.

@VahidCullsberg

2 жыл бұрын

It's also possible to shoot me an email at cullsberghandmade@gmail.com I don't have a website yet to display the items. I do plan to have one in the future.

✌️🔪👍🔪🔪🔪👍💪

@VahidCullsberg

2 жыл бұрын

😊🙏

Ничего особенного.... Много лишней ненужной работы..

Hello Bro! I need an axe, and I want Axe with Something Cool, High quality, Traditional lappish mixed with Celtic and it should be small enough that I can wear it on my belt. 😉 I know you are able to do it, would you be willing to do it?

@VahidCullsberg

2 жыл бұрын

Hello, That sounds like a fun, creative and challenging project! I would love to but I don't have a forge at the moment. I do plan to start forging in the future 😊