Super Useful Tip! :) Im making One custom currently for my show. Couldnt get them back on! But i figure this will work perfectly! Thanks for the tip!
@ChristianBristol-zu1yb3 ай бұрын
Low heat in a small pan all four tires in at once
@Nezumi664 жыл бұрын
A hair dryer is quicker, easier and less messy :)
@bambilala1
4 жыл бұрын
I have no hair. So no hairdryer😂
@BxGengar
3 жыл бұрын
Sharon Tarshish lol
@tomtbi4 жыл бұрын
I have used hot water to take tires off of rims before.. It usually works well...
@snoopy6202 жыл бұрын
Thank you it worked
@bambilala1
2 жыл бұрын
Thanks for watching!
@precise3291Ай бұрын
Good idea but an absolute pain in the a.s!!!!!! Took me an hour to remove 4 tires. My fingers are numb.
@bambilala1
Ай бұрын
Oh. Why is that. It really took me few minutes and that's all!
@ChristianBristol-zu1yb3 ай бұрын
Put in freezer after to shrink back to regular and stay on rim
@bigcharliesmodelgarage2964 жыл бұрын
Cool
@tomtbi4 жыл бұрын
An easy way to get 2 variations of the same model.... I prefer the one with the black tires but that is only me ..
@akkadianrecords37093 жыл бұрын
I used these tires on my Walmart power craze RC. So much better than the tires it came with. Hobby shop wanted 39 bucks for ones like it. I paid three dollars. Lmao.
@bambilala1
3 жыл бұрын
Are they good? I think they are too stiff🤔
@akkadianrecords3709
3 жыл бұрын
Sharon Tarshish yeah you have to boil them to mess up the molecular structure of the rigid tires. Like 5 mins or so not on the burner though. After u take it off the burner from boiling point.
@bambilala1
3 жыл бұрын
But they will be stiff again once they cool down. I guess you need softer tires for RC car. I am saying that since i run a crawler with soft tires way better than the stiff ones.
@akkadianrecords3709
3 жыл бұрын
I’ll upload the video of it running. It does way better with these tires. You gotta get a bigger battery though mine was an 800mah micro for 7.99 at Hobbytown. I took the VUSE ones out.
@akkadianrecords3709
3 жыл бұрын
I just played with it for an hour and 20 mins straight on that battery.
@Tim-574 жыл бұрын
Happy Sunday Sharon. You are a good Dad🙂 Take care😁
@bambilala1
4 жыл бұрын
Thanks buddy. He really liked his new tires! Have a great new week!
@Tim-57
4 жыл бұрын
@@bambilala1 You are welcome my friend. Very happy that he likes the new look. Edit: I hope that your week coming up, is great as well😁
@Tim-57
4 жыл бұрын
@@bambilala1 Hey Bud A question... Do you have an email address for your channel?
@bambilala1
4 жыл бұрын
@@Tim-57 TARSHISH407@GMAIL.COM
@Tim-57
4 жыл бұрын
@@bambilala1 Thanks Bud🙂
@deanaanderson79536 ай бұрын
I have 3 questions. 1. Will microwaved water work? 2. Will the BKT printings come off if I use those tires? 3. Do they re-harden?
@bambilala1
6 ай бұрын
Why microwave? I dont think BKT printing would came off. And once cooled down the tires will be reharden.
@deanaanderson7953
6 ай бұрын
@@bambilala1 what temperature should you boil the water
@bambilala1
6 ай бұрын
@@deanaanderson7953 Enough hot so it will get softer but will not hurt your fingers😆
@22PathsTarot3 күн бұрын
Will this work for the larger, 1:24 scale trucks?
@bambilala1
3 күн бұрын
I guess it is the same.
@22PathsTarot
3 күн бұрын
@bambilala1 I tried it and it worked but took longer. I will write an update when I fit them back
@michaellawrence84282 жыл бұрын
How do I get the whole rim and tire off the axel without striping it?
@bambilala1
2 жыл бұрын
Maybe try heating the axel. Than put it back with epoxy but wait 24 hours untill full bond.
@PJMCollectibles4 жыл бұрын
waiter, what is your soup du jour? we have monster jam soup especially made by chef sharon 😁😁😁
@bambilala1
4 жыл бұрын
😂😂😂
@steverangon16583 жыл бұрын
Doesn't Monster Trucks have a screw and you can remove the body chassis?
@bambilala1
3 жыл бұрын
Yea i could do that. However, that donor car had a transperent tube chassis wich i did not like to have on my Sonuvadigger.
@JeffGordonFan
2 жыл бұрын
@@bambilala1 There Is Clips On The Actual Chassis And You Can Replace
@mikhailsubi6969
Жыл бұрын
@@JeffGordonFan WHERE???
@JeffGordonFan
Жыл бұрын
@@mikhailsubi6969 the cage is attached to the axles
@JeffGordonFan
Жыл бұрын
@@mikhailsubi6969 stretch the sides a bit after removing the body. And pull it off
Пікірлер: 51
I didn't know they had a blue GraveDigger. Cool!
@JuanchoYT69
2 жыл бұрын
Its actually grave diggers son (son uva digger)
@shineranda29er
Жыл бұрын
Son Uva Digger
Super Useful Tip! :) Im making One custom currently for my show. Couldnt get them back on! But i figure this will work perfectly! Thanks for the tip!
Low heat in a small pan all four tires in at once
A hair dryer is quicker, easier and less messy :)
@bambilala1
4 жыл бұрын
I have no hair. So no hairdryer😂
@BxGengar
3 жыл бұрын
Sharon Tarshish lol
I have used hot water to take tires off of rims before.. It usually works well...
Thank you it worked
@bambilala1
2 жыл бұрын
Thanks for watching!
Good idea but an absolute pain in the a.s!!!!!! Took me an hour to remove 4 tires. My fingers are numb.
@bambilala1
Ай бұрын
Oh. Why is that. It really took me few minutes and that's all!
Put in freezer after to shrink back to regular and stay on rim
Cool
An easy way to get 2 variations of the same model.... I prefer the one with the black tires but that is only me ..
I used these tires on my Walmart power craze RC. So much better than the tires it came with. Hobby shop wanted 39 bucks for ones like it. I paid three dollars. Lmao.
@bambilala1
3 жыл бұрын
Are they good? I think they are too stiff🤔
@akkadianrecords3709
3 жыл бұрын
Sharon Tarshish yeah you have to boil them to mess up the molecular structure of the rigid tires. Like 5 mins or so not on the burner though. After u take it off the burner from boiling point.
@bambilala1
3 жыл бұрын
But they will be stiff again once they cool down. I guess you need softer tires for RC car. I am saying that since i run a crawler with soft tires way better than the stiff ones.
@akkadianrecords3709
3 жыл бұрын
I’ll upload the video of it running. It does way better with these tires. You gotta get a bigger battery though mine was an 800mah micro for 7.99 at Hobbytown. I took the VUSE ones out.
@akkadianrecords3709
3 жыл бұрын
I just played with it for an hour and 20 mins straight on that battery.
Happy Sunday Sharon. You are a good Dad🙂 Take care😁
@bambilala1
4 жыл бұрын
Thanks buddy. He really liked his new tires! Have a great new week!
@Tim-57
4 жыл бұрын
@@bambilala1 You are welcome my friend. Very happy that he likes the new look. Edit: I hope that your week coming up, is great as well😁
@Tim-57
4 жыл бұрын
@@bambilala1 Hey Bud A question... Do you have an email address for your channel?
@bambilala1
4 жыл бұрын
@@Tim-57 TARSHISH407@GMAIL.COM
@Tim-57
4 жыл бұрын
@@bambilala1 Thanks Bud🙂
I have 3 questions. 1. Will microwaved water work? 2. Will the BKT printings come off if I use those tires? 3. Do they re-harden?
@bambilala1
6 ай бұрын
Why microwave? I dont think BKT printing would came off. And once cooled down the tires will be reharden.
@deanaanderson7953
6 ай бұрын
@@bambilala1 what temperature should you boil the water
@bambilala1
6 ай бұрын
@@deanaanderson7953 Enough hot so it will get softer but will not hurt your fingers😆
Will this work for the larger, 1:24 scale trucks?
@bambilala1
3 күн бұрын
I guess it is the same.
@22PathsTarot
3 күн бұрын
@bambilala1 I tried it and it worked but took longer. I will write an update when I fit them back
How do I get the whole rim and tire off the axel without striping it?
@bambilala1
2 жыл бұрын
Maybe try heating the axel. Than put it back with epoxy but wait 24 hours untill full bond.
waiter, what is your soup du jour? we have monster jam soup especially made by chef sharon 😁😁😁
@bambilala1
4 жыл бұрын
😂😂😂
Doesn't Monster Trucks have a screw and you can remove the body chassis?
@bambilala1
3 жыл бұрын
Yea i could do that. However, that donor car had a transperent tube chassis wich i did not like to have on my Sonuvadigger.
@JeffGordonFan
2 жыл бұрын
@@bambilala1 There Is Clips On The Actual Chassis And You Can Replace
@mikhailsubi6969
Жыл бұрын
@@JeffGordonFan WHERE???
@JeffGordonFan
Жыл бұрын
@@mikhailsubi6969 the cage is attached to the axles
@JeffGordonFan
Жыл бұрын
@@mikhailsubi6969 stretch the sides a bit after removing the body. And pull it off
Dumb