Monkey 125 First 600 Mile Oil Service & Oil Spinner clean-out - LONG VIDEO!

Автокөліктер мен көлік құралдары

-- WARNING -- LONG VIDEO! -- GET BEER! --
Shortcuts: 1:35 - Oil drop, 10:35 - Cover off, 14:30 - Spinner cover off, 16:00 spinner sludge!
Visit my Monkey Merch store! : wright-motorsport.square.site/
In this episode I tackle tackle the first oil service with a difference.
The official Honda service schedule stipulates that the engine oil should be changed at 600 miles from new, but states that the oil spinner (Basically a centrifugal filter) doesn't need cleaning out until 8000 miles.
If I paid my local dealer (£70) to do this first service, all I would get is essentially a (£9) oil change and a visual external poke about. So I'm going to do it properly myself instead.
I show you why this is a rather bad move on Honda's part...
This is a rather long video, so sit back with a few bottles of Dom Pérignon, and enjoy.
Note: I DID remove the 2p from the engine before re-attaching the case!
Torques:
- Spinner cover plate: 12 NM (9ft lb)
- Cover bolts: 12 NM (9ft lb)
- Sump plug: 24 NM (18ft lb)

Пікірлер: 44

  • @jonnysteel3595
    @jonnysteel35953 жыл бұрын

    Got anxiety about not seeing the penny removed,but great video.

  • @janly4
    @janly44 жыл бұрын

    Excellent video, really appreciated you sharing. I’ve got just under 300 miles on my blue 2020 Monkey, but anticipating the first oil change/service. I agree, worth going the extra step with the spinner. Well done, look forward to your future videos. Thanks!

  • @hondamonkeytv4138

    @hondamonkeytv4138

    4 жыл бұрын

    Thank you! No problem at all, Good luck :-)

  • @stevehughes2356
    @stevehughes23564 жыл бұрын

    Great video I enjoyed that. Re your comment the old oil looked dark. At my monkey first service the tech said Honda fill the engine with mineral oil from the factory. This allows better bedding in of the wearing surfaces. Then at first service they switch to synth as you have shown.

  • @hondamonkeytv4138

    @hondamonkeytv4138

    4 жыл бұрын

    Hi Steve, Thank you :-) Ahh I see yes that makes sense - I usually use low-grade oil in my car engines for breaking in.

  • @ChristianThwaites
    @ChristianThwaites3 жыл бұрын

    Just bought a Monkey so this will be very helpful! Thanks

  • @sammariti3686
    @sammariti36863 жыл бұрын

    Very helpful! Clear, complete, good camera work. Thanks so much!

  • @hondamonkeytv4138

    @hondamonkeytv4138

    3 жыл бұрын

    Glad it was helpful!

  • @tomservo3401
    @tomservo34014 жыл бұрын

    Had my monkey 2 weeks, 150 miles. Looking forward to doing its first maintenance/oil change.

  • @UnknownOverLand
    @UnknownOverLand4 жыл бұрын

    Having to pull the entire case for an oil change (spinner and filter clean) is one of the reaons I opted for the kitaco clutch cover (added bonus of removing the oil spinner altogether). Now I've just got a standard oil filter that's easily accessible during maintenance. Tons of good information here for those doing their own oil changes.

  • @hondamonkeytv4138

    @hondamonkeytv4138

    4 жыл бұрын

    Hi, Yes agreed, I am very much considering getting one - Are there any adverse effects from removing the spinner? such as rough idle or stalling?

  • @apio3810

    @apio3810

    4 жыл бұрын

    @@hondamonkeytv4138 The Kitaco clutch cover will not install with the stock exhaust.

  • @hondamonkeytv4138

    @hondamonkeytv4138

    4 жыл бұрын

    Ah - I wasn't aware of that, thank you!!!

  • @UnknownOverLand

    @UnknownOverLand

    4 жыл бұрын

    Honda Monkey TV I’ve had no issues with removing the spinner. Without the added weight the engine can spin up a bit faster without the spinner, but hard to quantify how much that has helped anything. Like was mentioned there is a clearance issue with the stock exhaust (I hadn’t realized this when I mentioned it as I had already replaced the exhaust before I moved to the cover).

  • @hondamonkeytv4138

    @hondamonkeytv4138

    4 жыл бұрын

    Thanks for replying - ok that's good, I was thinking along the lines of cars where I've fitted lightened flywheels, sometimes it can cause issues at low revs, as it lacks inertia. Not sure what the compression ratio is on these, obviously issues surface in the higher range (10+)

  • @YuthKhun
    @YuthKhun2 жыл бұрын

    They made it so hard for oil change. Glad 2022 model has oil filter now!

  • @CurtEdwards
    @CurtEdwards4 жыл бұрын

    Nicely done thanks!

  • @Shewwler
    @Shewwler2 жыл бұрын

    Clear concise video. Marvelous. Thank you.

  • @RobertDeloyd
    @RobertDeloyd4 жыл бұрын

    Great video! I am considering purchasing a Monkey and watching every video I can find. Thanks for the decent instructions Oh, did you remember to take the penny out? Just kidding ;)

  • @alexzingo6952
    @alexzingo69522 жыл бұрын

    Just bought Monkey, this is greatly helpful video.

  • @hondamonkeytv4138

    @hondamonkeytv4138

    Жыл бұрын

    Glad I could help!

  • @biologySoon
    @biologySoon3 жыл бұрын

    Good video, thanks!

  • @bogeyfly1
    @bogeyfly13 жыл бұрын

    brilliant video 👍

  • @hondamonkeytv4138

    @hondamonkeytv4138

    3 жыл бұрын

    Thank you 👍

  • @stanleydenning
    @stanleydenning3 жыл бұрын

    I'm not familiar with this particular Honda engine. But I have worked on a few other Hondas. I am willing to bet that removing the entire side cover is not necessary. Instead, just the small circular one with three screws. To stop the spinner from turning while extracting the screws on the spinner, just put it in gear. Other than that, I agree with the auther.

  • @hondamonkeytv4138

    @hondamonkeytv4138

    3 жыл бұрын

    Nope, the side cover is completely solid. They have put a proper filter in the 2022 model.

  • @Timberjo2
    @Timberjo22 жыл бұрын

    Thanks for the video! Where did you find the oil spout that you attached to the oil bottle?

  • @superquax1
    @superquax14 жыл бұрын

    Really good 👍🏽😃

  • @hondamonkeytv4138

    @hondamonkeytv4138

    4 жыл бұрын

    Thanks 😁

  • @shabbos-goy9407
    @shabbos-goy94072 жыл бұрын

    New 2022 motor is 5 speed and has a proper paper filter.

  • @wim-xc4pj
    @wim-xc4pj3 жыл бұрын

    I didn't see him take the coin out before reassembly.

  • @davidemmett1
    @davidemmett14 жыл бұрын

    Very informative but what happens about the warranty?

  • @williammoore9609
    @williammoore96094 жыл бұрын

    Good video. What Loctite number did you use?

  • @stanleydenning

    @stanleydenning

    3 жыл бұрын

    Blue. Not necessary.

  • @athanasiospapadimitriou5216
    @athanasiospapadimitriou52162 жыл бұрын

    My friend we must clean this metallic stuff in every oil change? The oil filter is inside the engine? Excellent video.

  • @michaelwolf8090
    @michaelwolf80903 жыл бұрын

    What an awful way to change engine oil! I can't believe Honda did that. I imagine a lot of people will just drain and replace the oil 50% of the time!

  • @terjelundstrm3553

    @terjelundstrm3553

    3 жыл бұрын

    On my Honda Innova, which is basicly same engine, you first have to do it by 7500 miles (12 K). First time there was quite a lot of debree(?), I just did it again by 27 K, a lot less, so I think I will wait longer until the next cleaning of the inner filters. I do, however, change the oil according to the service schedual (2500 miles /4 K) or sooner. And that was the Honda ANF 125 Innova.

  • @nolan1437
    @nolan14373 жыл бұрын

    Anyone know if its the exact same procedure with a super cub?

  • @hondamonkeytv4138

    @hondamonkeytv4138

    3 жыл бұрын

    Yes its the same engine, though access to it will be different

  • @tessblog3384
    @tessblog33842 жыл бұрын

    awesome my friend like the content good luck cute

  • @chrisneed_for_speed851
    @chrisneed_for_speed8513 жыл бұрын

    Well done. Is monkey have any oil filter?

  • @0007dro
    @0007dro3 жыл бұрын

    New Monkey owner just wish my Hennessey 650 Camaro was so easy to do maintenance, Lol.

  • @paulvallejo
    @paulvallejo4 жыл бұрын

    Until this video, I had no clue what the oil spinner was for. Most videos only mention removing it

  • @hondamonkeytv4138

    @hondamonkeytv4138

    4 жыл бұрын

    Hi Paul! Glad I could be some help. Its an interesting concept, not sure why they don't just have a filter but hey it is what it is!!

Келесі