Aren't all shoes steel toes when you have them on?

@Nyitemare

3 жыл бұрын

underrated comment 😂

@bradleykiff5193

3 жыл бұрын

“Steele Toes”

@greghelms4458

3 жыл бұрын

Alectoes intolerant?

@mattwood9613

3 жыл бұрын

@@greghelms4458 that’s just not even funny, but i still laughed, but not funny, but i still laughed

@greghelms4458

3 жыл бұрын

@@mattwood9613 lol. And I wasn’t even drinking.

He's back! I needed this today!

@eliprice138

3 жыл бұрын

I can truly say iv been also missing me some Alex Steel show !!

@builtbybolt1595

3 жыл бұрын

Same ❤️ very inspirational.

@timjohns1155

3 жыл бұрын

You Nd me both. I love Alec but definitely will miss will.

@greghelms4458

3 жыл бұрын

Yep.

@StinkyHeXoR

3 жыл бұрын

He is also back to metric! 😊

Alec, holding a broom sideways, wanting to sweep the floor in the other room: "nope, won't fit through the door"

@Novur

3 жыл бұрын

This is like the vacuum chamber all over again, if he's not sitting down in Planning Mode his brain just switches off 😆

@nxtniklas

3 жыл бұрын

Yeah Alec just tilt it! 😂

You could have twisted those first legs through the grinding room door sir. Sideways.

@AndyFromBeaverton

3 жыл бұрын

I was yelling that at the time. I guess Alec couldn't hear me over the grinder.

@REAPER85151

3 жыл бұрын

@@AndyFromBeaverton same i was thinking aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa

@TheHungryCanadian

3 жыл бұрын

yeah i was scrolling down to just type this comment, glad others thought of it as well!

@robpalomo

3 жыл бұрын

so glad it wasn't just me

@kukri1877

3 жыл бұрын

He wanted wheels and a vice attached to it.

That coffe is from my home state! Hello, from Minas Gerais, Brasil!

“You can only imagine how i felt when they only had red dicam” *camera cuts to Will, looking up, puzzled, as if sensing a disturbance in the force* Missed opportunity 😒

How many people were as triggered as I was when he didn't even try to get the three-legged stand through the door before modifying it? I bet it would have gone through EASILY. 😅

@Robster-Craw

3 жыл бұрын

Yeah, I used to assemble and deliver couches and recliners, and those arent small enough to "just fit" through a door. But you have ways to do it like rotate it as you go in. I was totally thinking that he had plenty of enough room to rotate that stand through the door. With wheels, it would have been even easier. kids these days just don't take the time to venture into the possibilities.

@yehudahardoon3567

3 жыл бұрын

@@Robster-Craw I'm guessing Alec had already been planning ahead and fully intended to install the retractable wheel thingamajig - which means he probably wanted to be able to wheel the stand in and out of the grinding room without too much hassle in the future.

@kassnijders8372

3 жыл бұрын

Me to just turn it around the corner.

@ironbomb6753

3 жыл бұрын

@@yehudahardoon3567 Alec could have stated that a bit more clearly.

@madmodders

3 жыл бұрын

@@yehudahardoon3567 But you still don't need to wheel it in by having one of the triangle's sides paralell do the door. And Alec demonstrates exactly that at 8:13, and it's plenty of space to spare to the door frame. But I guess it was good he narrowed the wheel base / footprint, because he has a bunch of crap behind the door so it can't open up fully... 🤣

It's great to see that after only a short time back in the UK Alec is back to using proper units of measurement. 😂

@KipdoesStuff

3 жыл бұрын

How ever you measure, that is the proper way. Metric isn't superior, its just all you know.

@chasebelcher7932

3 жыл бұрын

@@KipdoesStuff metric is far superior. Once you go metric you never go back

@xanderstuff7

3 жыл бұрын

@@KipdoesStuff Imperial is based on metric nowadays lol. If your using imperial, your just adding an extra step and possible inaccuracies the more you go on.

@mwip972

3 жыл бұрын

@@KipdoesStuff lol

There is something just so satisfying about seeing a bit of a return to the older style Alec Steele. I didn't realize how much I missed it.

Alec: "I did make it when i was 13" me: *stands up to get more snacks

Why do I like videos with just Alec working alone ?

Is it just me or are y'all falling back in love with the cannel with these last videos?? Love the vibe of the videos back in britain with a smaller crew. It feels more like a family and like we're forgeing with a friend. Keep it up Alex!!!

"MODULAR DIES!" Poor modular, R.I.P...

@SilverloafCustomRazors

3 жыл бұрын

R.I.P MO 😔😁👍

@myrealname2022

3 жыл бұрын

New level unlocked! +2 dad joke power!

@sarchlalaith8836

3 жыл бұрын

@@myrealname2022 I was going to say that's a good dad joke in this time of social distancing... Certainly as close as I could get

Daily Steele series please come back. Miss those days. Lots of work but was very enjoyable.

Am I the only one that noticed the Captain America hex nut shield ?

@zacharyelliott7161

3 жыл бұрын

I saw it too.

@FlinnGaidin

3 жыл бұрын

Nope.

Cool fact about your coffee, Pau Brasil is a tree that grows in a big part of the Brazilian coast and it's the reason why the country is called Brazil, it has a red wood which is nice for knife handles

Glad to see you back home in the UK 🇬🇧 I’m sure your content has been shining brighter

Im at work, as a machinist, watching Alec machine a machine. Oddly satisfying.

I didn’t need to be told Jamie was back to know Jamie was back that camera work is amazing!

Where is my "Ladies and Gentlemen, welcome back to the workshop it's fantastic to have you here !" ?????

Best thing about Alec being back in England is he is talking in measurements that actually make sense 🥰

@marka4891

3 жыл бұрын

Only if your brain functions in multiples of tens and are incapable of processing the very reasonable method of indexing off of the various bits of the bodies of long dead kings! :P

@Wang-ker

3 жыл бұрын

@@marka4891 you know what I agree. Let’s Bring back cubits and spans

@marka4891

3 жыл бұрын

@@Wang-ker Exactly! Who needs standardization when you can use rough estimates that are different for everyone!

Brilliant job on the "Lift and Shift" trolley. Great vlog, thanks for sharing.

Coming from Malaysia, watching you switching back and fourth between metric and imperial is entertaining as I tend to use either for convenience!

This reminds me a lot of old school Alec Steele. Loving these new videos Alec. Awesome work.

Great Ooouuuuuhh at 1:46 when more little parts fall out of the power hammer. Looking forward to the DRO install.

First thought: RIP Modular...

Thanks for dogging us in and showing us your new holes! Red Dykem Rocks!

I just did a leg vice restoration this is perfect timing! always thoroughly enjoy the content. best, Nathan

Hey Alec, thank you for your generosity! Love the channel. From The Buckin Army! 👏🏻👏🏻

As a dog trainer, I love your pup hanging out on a place command in the shop ☺️

Dude that little tension rod on the wheel rig is genius!

The production of this videos is insane

I keep waiting for someone to pour red dykem in his blue dykem to make it purple dykem just to see his reaction.

whenever Alec posts a new video I'm like YES he posted I love this guy.

Machinists have been making properly spaced holes without DRO for long time BUT when the bag of gold drops I’m putting a DRO on my little lathe, big lathe, milling machine and the laser, drill press, and coffee machine and everything else that moves because they are so nice to have.

@chronokoks

3 жыл бұрын

nothing beats the massive increase in productivity with a DRO.

Great timing on this... I'm in the process of trying to figure out how to do something exactly similar. You just solved it for me. Thanks!

No matter how long I watch welding happen I still close my eyes when the welding starts

@KipdoesStuff

3 жыл бұрын

closing you eyes won't help. You can still do damage through your eye lids, lol.

@turnerloewen5744

3 жыл бұрын

And I’ll get a nasty sun burn from the camera lol

Good to see you back at it.

I always love your videos alec. They make my day better and it's really amazing to watch how and what you can make.

yes Alec, I've been waiting for AGES!!!!

For your face mill i suggest using copper slip.on the torque heads so when the fave mill gets hot it completely knacker the screws

How the heck is there dislikes on this?! Who has time to just go dislike everyone's videos?! Alec you do a great job on your videos!

@KipdoesStuff

3 жыл бұрын

When KZread puts and ad before the video then aAex adds another ad, that will get him a downvote.

Can't wait to see him to turn the steel he cut off those dies into a sword...

Great too see you back Alec been missing your content

Glad to see you back at work! Those are still some large dies.

9:32 "One important step we shouldn't miss..." **Yogo casually walks by**

I do enjoy these simpler and slower pace videos :)

Liked this because you've gone back to your why and how were doing something video's. Then at the end you show ++ We get to see Yogo, on her own camp style bed to keep her off the cold floor.

Man I needed this video, your zest for life is contagious Alec! Big love man

what would be cool would be the base of the stand being a plentum with many small holes drilled in the floor side of it. Then you have an air source pressurize the plentum and the vise floats on a cushion of air to where you push it. You could move a power hammer that way. Just a neat, elegant, "non moving part" way of doing it.

as always, entertaining, informative and a pleasure to watch.

Loving this new workshop series

nothing more I love than an alec steele video, my favourite KZreadr 😀😀😀

That mag drill with those drills is just incredible to watch going straight through that plate!

Released on a day of national mourning. Love this channel.

Thank you Alec, just a few days ago, I made my first “leaf.” I used a piece of rebar and turned out terrible. But thanks for getting me into blacksmithing. :)

this is perfect i just got out of class so i can now cool down and do some homework with Alec

Good idea for the wheels and legs. Simplest design usually works the best.

What fun it is to tag along with your random shenanigans good sir

Presentation and videography are on point as always, keep up the great content. Thank you

You might want to go find the piece you cut off the top of that die, drill matching holes in it, and use it as a template for all future die heads you make for it, to ensure proper peg spacing.

My ears are pleased listening to the Sound of metric measurments

Adding a doggo to the channel just made the videos better than I could have imagined

So glad for new content

Does Alec seem more relaxed? He seems more relaxed to me.

I’m learning how to use a Bridgeport. It’s really cool and I like to watch you work with mills to see what you know about them

That is so funny. You are in England and had Nick’s boots sent to you. I pass it every day on the way home from work. It is about 2 miles from my house in Spokane Valley.

6:57 what a mood

Really nice work Alex. As always to be true. Be safe

River sand ie for block paving would help more because it's spherical and not angular, which sticks, you can actually use a funnel with this when dry 🐹

Love these shop videos Alec!!

Wow, those chop saws really put in the work. Not much better of an advertisement for a tool than that.

Can't wait to see you do some sword or am axe soon. With all your awesome new tools it looks like it will be very entertaining as always.

Thats awesome that u watch jimmy diresta your videos and his videos and his videos are why i have a propane forge a grinder belt sander welder and many other tools iv gained over the past few years and i love it

Fantastic progress

You never cease to amaze me, Alec

I hope Evolution are going to send you a nice new blade in recognition of that unfeasibly giant cut

Great show Alec!

Alec your the best.

I've been waiting, welcome back!

Ever thought about making Damascus-Stilettos? I mean the heels?! With jewelry and engraving... put 'em on a plinth and you got a Discussion piece...

You are such a perfectionist! I’m amazed at what you build.

You should build a steel tensegrity table. Super cool and eye catching designs. Just look them up and see for yourself

Excellent video - keep them coming Alec

Red Dykem? That Devil's Dykem has driven you mad in the past. How will Alec deal with the insanity in a spray can? Will Alec now have to eat his own feet?! (edited for typos)

Filled a £50 pillar drill column with rebar and concrete, the table has a jack screw and its very solid.

Finally, the video we needed!

Oh Yeah!!! Thanks Alec!!!

Well, that answers the question about the 70 hammers video. The question was: "Why doesn't he just make a die set for the hammers? Of course it would take some time, but he'd get it back pretty quick." Apparently the answer was "doesn't have a modular die system." which honestly I thought was a standard thing!

This is gonna help me with my match today. Keep it man. You make me wanna wake up.

SAlut de France. Je suis vos vidéos c'est vraiment ma passion la forge. Continu comme ça.

In love with your coffee pot

Been looking everyday for another thats my night sorted 👌

Awesome video. Turned out very unique and awesome. Keep up the great craftsmanship and hard work my friend Forge On and Fab on God Bless

I like the lighting on the background

Hey Alec, great video, as always. You should consider buying a portable hardness tester! They're fairly simple to operate and you would get much more precise hardness readings.

It may be a little thing, but it's so good to hear you speak in metric again!

Love seeing your face and projects Alec!

The last minute was the pearl.

Looking great bud ! Keep them coming bro! ✌️🔥🙏💪