In this episode we modify chain store pre-made Roller Blinds to fit odd sized windows.
Жүктеу.....
Пікірлер: 28
@Tommo19764 жыл бұрын
You should always cut on the waste side, put your straight edge on the side of material you need. This is so if you accidentally cut a little off line, it's the side you are cutting off and don't need. You can always go back and cut the straight line again
@callmehank88
4 жыл бұрын
Yeah that made me nervous. I though, if he runs off that straight edge, he's stuffed the material he wants to keep.
@MartFishTank
Жыл бұрын
I CAME HERE FOR THIS. AAAAA THE ANXIETY LMFAO
@fayeashcroft7066
11 ай бұрын
What is the waste side ? Don’t know what that means ???? The off side ?? The left hand side or the right hand size ???
@kayplayforth90073 жыл бұрын
Can you please show how the fabric fits back into the Spool.
@jasonallen68363 жыл бұрын
Stuck on step 1. I bought a cat but it keeps shitting everywhere. Please help.
@darkwaterblue3 жыл бұрын
Great video, will grab a circular knife and give this a go! Cheers.
@Slowrex1235 жыл бұрын
Nicely done
@gmbh84433 жыл бұрын
I died when your cat walk on your roller blind 😂😂😂😂😂😂😂😂😂😂😂😂😂
@kathytoner4954 Жыл бұрын
Looks like my house, having to move the cat! Thank you for the video
@jchrisj2002 жыл бұрын
I liked your video and the cat helping was a nice surprise. Being in the US I mentally auto-translated 40 mil into 0.040" which seemed like a pretty small adjustment.
@dlon88993 жыл бұрын
Thanks mate, happy new year. London out
@eloadjointeplus11 ай бұрын
Thank you for all these clear instructions! I bought a roll-up blind and was wondering if I could change to a roll-up device like the one you use in the video. Do you believe this is possible? (I think so, because I saw some on Amazon) Last question: How do I remove the end caps from each side of the pole on my automatic roller blind?
@ets2mp7533 жыл бұрын
blind should face the other way around Just noticed that !
@ronnieteague5056
2 жыл бұрын
Yes.... I noticed that too ! :)
@arrahslichenmyer49862 жыл бұрын
I like cats. They are curious and belong on many a project :)
@a.m.93572 жыл бұрын
How do you shorten the drop (length, not width) if it's too long?
@miriamchannon9244 Жыл бұрын
Thanks I'm going to implement your tutorial tomorrow, I'll let you know how I got on, now tho , time to start dinner 🍽 😋
@gregscarfe66225 жыл бұрын
Video just in time, for my weekend task! But Ive got blind with interior roller spring, bit trickier...
@Dee.Cee.4 жыл бұрын
Why do u take off a extra 40mm ? And is that the same for modifying all roller blinds ?
@kevinfrost5271
4 жыл бұрын
What is the blue tool you were using?
@jonwilliams6996
4 жыл бұрын
To allow for the width of the fixings. It won't always be 40mm, but you will always need to cut that bit extra material (based on the width of the fixings of your own blind).
@nacholibre19622 жыл бұрын
"The land of Diet Coke"! Funny!
@OriginalNightStalker4 жыл бұрын
Just a suggestion to get your videos looking a bit more professional - turn the freakin' TV off..! :) It is very distracting. And I'd echo what somebody said below - always cut on the waste side of the line. I saw another video on this same task - and the guy did it on the entire roller blind setup, all tightly rolled up - on the chop saw! Great result, and very quick.
@gregscarfe66225 жыл бұрын
Haha 3:49
@artsline6042 жыл бұрын
i'm just going to use my shrink ray gun, much easier
@hotdog79883 жыл бұрын
He talks like Elliot Goblet.
@sanjivoberoi53613 жыл бұрын
Yes, turn off that stupid TV, get the cat out. Demonstrate how to cut the rod. The rod and measurements are the critical factors which you missed. Why 40ml for the fixings? Are they all the same? How to find out? Then cut your video to the basics needed. Thanks anyway, nice effort and somewhat helpful.
Пікірлер: 28
You should always cut on the waste side, put your straight edge on the side of material you need. This is so if you accidentally cut a little off line, it's the side you are cutting off and don't need. You can always go back and cut the straight line again
@callmehank88
4 жыл бұрын
Yeah that made me nervous. I though, if he runs off that straight edge, he's stuffed the material he wants to keep.
@MartFishTank
Жыл бұрын
I CAME HERE FOR THIS. AAAAA THE ANXIETY LMFAO
@fayeashcroft7066
11 ай бұрын
What is the waste side ? Don’t know what that means ???? The off side ?? The left hand side or the right hand size ???
Can you please show how the fabric fits back into the Spool.
Stuck on step 1. I bought a cat but it keeps shitting everywhere. Please help.
Great video, will grab a circular knife and give this a go! Cheers.
Nicely done
I died when your cat walk on your roller blind 😂😂😂😂😂😂😂😂😂😂😂😂😂
Looks like my house, having to move the cat! Thank you for the video
I liked your video and the cat helping was a nice surprise. Being in the US I mentally auto-translated 40 mil into 0.040" which seemed like a pretty small adjustment.
Thanks mate, happy new year. London out
Thank you for all these clear instructions! I bought a roll-up blind and was wondering if I could change to a roll-up device like the one you use in the video. Do you believe this is possible? (I think so, because I saw some on Amazon) Last question: How do I remove the end caps from each side of the pole on my automatic roller blind?
blind should face the other way around Just noticed that !
@ronnieteague5056
2 жыл бұрын
Yes.... I noticed that too ! :)
I like cats. They are curious and belong on many a project :)
How do you shorten the drop (length, not width) if it's too long?
Thanks I'm going to implement your tutorial tomorrow, I'll let you know how I got on, now tho , time to start dinner 🍽 😋
Video just in time, for my weekend task! But Ive got blind with interior roller spring, bit trickier...
Why do u take off a extra 40mm ? And is that the same for modifying all roller blinds ?
@kevinfrost5271
4 жыл бұрын
What is the blue tool you were using?
@jonwilliams6996
4 жыл бұрын
To allow for the width of the fixings. It won't always be 40mm, but you will always need to cut that bit extra material (based on the width of the fixings of your own blind).
"The land of Diet Coke"! Funny!
Just a suggestion to get your videos looking a bit more professional - turn the freakin' TV off..! :) It is very distracting. And I'd echo what somebody said below - always cut on the waste side of the line. I saw another video on this same task - and the guy did it on the entire roller blind setup, all tightly rolled up - on the chop saw! Great result, and very quick.
Haha 3:49
i'm just going to use my shrink ray gun, much easier
He talks like Elliot Goblet.
Yes, turn off that stupid TV, get the cat out. Demonstrate how to cut the rod. The rod and measurements are the critical factors which you missed. Why 40ml for the fixings? Are they all the same? How to find out? Then cut your video to the basics needed. Thanks anyway, nice effort and somewhat helpful.