Model Car Building - AMT Mack Cruise-liner 1/25th Scale Model - Part 1
Note: I installed the 5th wheel too far forward!!!! Part one of building the 1/25th scale AMT Mack Cruise-liner. Part two coming soon....
Жүктеу.....
Пікірлер: 34
@bobyoung1698 Жыл бұрын
"Look at all the guns!"😄
@ChickpeaHobbies
Жыл бұрын
🤣🤣🤣 I installed the fifth wheel too far forward! Live and learn !
@PartsTreeC Жыл бұрын
Thanks for making a video! This kit is the first model I've built since the early 90s and I needed a little help
@ChickpeaHobbies
Жыл бұрын
Hey mate! Thanks for watching! The biggest tips I’ve got are that I put the 5th wheel too far forward (was my first time too, should have been back over the axles) and I also had a lot of trouble fitting the cab over the turbo, I couldn’t get the cab to sit flush with the turbo on the engine. Some people have cut a chunk out of the cab interior to make room, let me know how you go!
@PartsTreeC
Жыл бұрын
@@ChickpeaHobbies I'll do my best to follow up, thanks for the extra tips!
@PartsTreeC
Жыл бұрын
Just an update after a few build sessions. The AMT instructions seem more like an exploded view than a step by step construction manual, and I'm struggling. The engine is assembled now, I had to sand down the turbo intake to fit properly, and I've glued the oil filters directly to the engine block haha
@THROTTLEPOWER2 жыл бұрын
Nice update, that's a great kit!!!!!
@ChickpeaHobbies
2 жыл бұрын
I installed the fifth wheel too far forward though 🤣
@myesenc2 жыл бұрын
Looking good so far, but you 5th wheel is too forward, it should be between the back axles.
@ChickpeaHobbies
2 жыл бұрын
Thank you you’re definitely right.
@fred5977_2 жыл бұрын
looking good man! currently building this kit too..
@ChickpeaHobbies
2 жыл бұрын
Thanks mate! I installed the fifth wheel too far forward 😂
@fred5977_
2 жыл бұрын
did you had any issues?
@ChickpeaHobbies
Жыл бұрын
Sorry mate yes I did I had trouble getting the cab over the engine. It was touching the turbo I think I heard some others get around the issue by cutting some of the floor of the cab
@butchsbasementbuilds6828 Жыл бұрын
Just found your channel, dropped u a sub
@ChickpeaHobbies
Жыл бұрын
Thanks mate I will check yours out this weekend 😎😎😎😎 happy modelling!!!!!
@jonathandellinger15959 ай бұрын
Thanks for not showing me how to put the duals together, that's what I needed...take care
@ChickpeaHobbies
9 ай бұрын
😰
@ChickpeaHobbies
9 ай бұрын
I put the fifth wheel in the wrong spot too.
@wendyst.germain4482
6 ай бұрын
@@ChickpeaHobbiesyou can’t please everyone. I love your videos. Keep up the good work.
@ChickpeaHobbies
3 ай бұрын
😎
@bobyoung1698 Жыл бұрын
You did a terrific job on that engine. I'll try pre-shading my next diesel engine to see if I can replicate the results. About the axle color - painting them to match or complement the cab color is nice but they are typically the same color as the chassis. Another way to tone down the brilliant shine of hobby chrome is to lightly mist it with a flat or semiflat clear coat.
@ChickpeaHobbies
Жыл бұрын
Ooh, I’ll have to try that idea! Thanks ☺️
@ChickpeaHobbies
Жыл бұрын
Thanks for the kind words 😁
@wendyst.germain4482
Жыл бұрын
When you lightly mist to dull the shine, how many coats do you apply? It’s a good idea. Thanks for sharing.
@bobyoung1698
Жыл бұрын
@WJ St.Germain I've done it in one, actually. A light mist gives you more of a polished aluminum look. Of course, it depends in the chrome quality, and they're all different. Practice on the sprue.👍
@maulol4410 Жыл бұрын
Beatiful 👍🇨🇷👍🇨🇷 carros mj
@ChickpeaHobbies
Жыл бұрын
Thank you 😊!
@doctorpc4x4 Жыл бұрын
nice video. 1/25th truck are big, Do a 1/16 truck they are about 4 times the size
@ChickpeaHobbies
Жыл бұрын
I didn’t know those existed ?! I’d love to do one for the channel. Recommendation ??
@lox_5013 ай бұрын
What part of the world is this video coming from?
@ChickpeaHobbies
3 ай бұрын
Australia :)
@kimstanley64962 жыл бұрын
YEAH Your 5TH wheel is Not Mounted Right CHECK your Sheet Directly 😉 or BOX 10-4 O.G.CALIFORNIA DIRT HAULER BACK QUIET 🤫.
@ChickpeaHobbies
2 жыл бұрын
Yep it’s been moved backwards now to sit over the axles 😎
Пікірлер: 34
"Look at all the guns!"😄
@ChickpeaHobbies
Жыл бұрын
🤣🤣🤣 I installed the fifth wheel too far forward! Live and learn !
Thanks for making a video! This kit is the first model I've built since the early 90s and I needed a little help
@ChickpeaHobbies
Жыл бұрын
Hey mate! Thanks for watching! The biggest tips I’ve got are that I put the 5th wheel too far forward (was my first time too, should have been back over the axles) and I also had a lot of trouble fitting the cab over the turbo, I couldn’t get the cab to sit flush with the turbo on the engine. Some people have cut a chunk out of the cab interior to make room, let me know how you go!
@PartsTreeC
Жыл бұрын
@@ChickpeaHobbies I'll do my best to follow up, thanks for the extra tips!
@PartsTreeC
Жыл бұрын
Just an update after a few build sessions. The AMT instructions seem more like an exploded view than a step by step construction manual, and I'm struggling. The engine is assembled now, I had to sand down the turbo intake to fit properly, and I've glued the oil filters directly to the engine block haha
Nice update, that's a great kit!!!!!
@ChickpeaHobbies
2 жыл бұрын
I installed the fifth wheel too far forward though 🤣
Looking good so far, but you 5th wheel is too forward, it should be between the back axles.
@ChickpeaHobbies
2 жыл бұрын
Thank you you’re definitely right.
looking good man! currently building this kit too..
@ChickpeaHobbies
2 жыл бұрын
Thanks mate! I installed the fifth wheel too far forward 😂
@fred5977_
2 жыл бұрын
did you had any issues?
@ChickpeaHobbies
Жыл бұрын
Sorry mate yes I did I had trouble getting the cab over the engine. It was touching the turbo I think I heard some others get around the issue by cutting some of the floor of the cab
Just found your channel, dropped u a sub
@ChickpeaHobbies
Жыл бұрын
Thanks mate I will check yours out this weekend 😎😎😎😎 happy modelling!!!!!
Thanks for not showing me how to put the duals together, that's what I needed...take care
@ChickpeaHobbies
9 ай бұрын
😰
@ChickpeaHobbies
9 ай бұрын
I put the fifth wheel in the wrong spot too.
@wendyst.germain4482
6 ай бұрын
@@ChickpeaHobbiesyou can’t please everyone. I love your videos. Keep up the good work.
@ChickpeaHobbies
3 ай бұрын
😎
You did a terrific job on that engine. I'll try pre-shading my next diesel engine to see if I can replicate the results. About the axle color - painting them to match or complement the cab color is nice but they are typically the same color as the chassis. Another way to tone down the brilliant shine of hobby chrome is to lightly mist it with a flat or semiflat clear coat.
@ChickpeaHobbies
Жыл бұрын
Ooh, I’ll have to try that idea! Thanks ☺️
@ChickpeaHobbies
Жыл бұрын
Thanks for the kind words 😁
@wendyst.germain4482
Жыл бұрын
When you lightly mist to dull the shine, how many coats do you apply? It’s a good idea. Thanks for sharing.
@bobyoung1698
Жыл бұрын
@WJ St.Germain I've done it in one, actually. A light mist gives you more of a polished aluminum look. Of course, it depends in the chrome quality, and they're all different. Practice on the sprue.👍
Beatiful 👍🇨🇷👍🇨🇷 carros mj
@ChickpeaHobbies
Жыл бұрын
Thank you 😊!
nice video. 1/25th truck are big, Do a 1/16 truck they are about 4 times the size
@ChickpeaHobbies
Жыл бұрын
I didn’t know those existed ?! I’d love to do one for the channel. Recommendation ??
What part of the world is this video coming from?
@ChickpeaHobbies
3 ай бұрын
Australia :)
YEAH Your 5TH wheel is Not Mounted Right CHECK your Sheet Directly 😉 or BOX 10-4 O.G.CALIFORNIA DIRT HAULER BACK QUIET 🤫.
@ChickpeaHobbies
2 жыл бұрын
Yep it’s been moved backwards now to sit over the axles 😎