Mk4 2.0l Intake Manifold Swap on Mk3 - Part 1
Got all the pieces i needed pulled off the junkyard beetle that i needed so i can do the mk4 intake manifold swap on miley. This is part one gathering all the pieces and tomorrow illl show you guys how to install it all with the help of Greg.
Pieces you need off mk4
-Upper intake manifold
-Lower Intake manifold
-Valve Cover
-Intake hose
-Mk4 2.0 engine cover
Other needed items
-16-18 gauge wire to extend your MAF sensor
-1/2in Freeze plug or regular pipe plug
-Drill bit
-Sealant
Instagram @mk3smith
Twitter @mk3smith
Song - / no-sleep
-
Пікірлер: 43
Good shit man I'll be doing the swap also had all the parts for a while now
finished this a month ago, nice touch to the car and a little benifit but I've gone with a stage 2 kinetic turbo setup. I also had the 260 tt and chip but was a nice touch and felt a nice power gain for the 2.slow. awesome progress!
@omaralvarez1513
7 жыл бұрын
Qogu Are You Still On Stock Internals? Im Gathering My Turbo Parts Here Soon Too!
Nice video with excellent presentation!
i like the video bro i found you on insta. been watching for a month now keep it up.
@Mk3Smith
6 жыл бұрын
Thanks man! means alot!
can't wait to try this haha
thank you for this i got the parts before my car went into the shop. once i get it back im going to start this swap as well. the forums are a little choppy on information at times
@Mk3Smith
6 жыл бұрын
Glad this was able to help you hope the swap went well!
@Kydroshooter
6 жыл бұрын
Christian Smith still haven't done it yet getting my mechanic to due the wiring and trying to weld on a small metal plate for the sensor on the manifold so once that gets done I'll start and will be replacing my fuel filter at the same time
3:13 All 5 of these are supposed to be Allen bolts so you can slip a standard "L" shaped Allen wrench between the intake runners and remove the two hidden bolts. Excellent video none the less.
Nice
Doing this mod now on my MK3 2.0 swapped MK2. Did you have any issues plugging the crank case vent?
Hey Christian quick question bro If your obd2 vr6 cylinder 1&6 are misfiring is that the wires or coil pack?
Why Is It That Everytime I Try To Do Something Your Quick At It And Do It 1000x Better 😂
@Mk3Smith
6 жыл бұрын
Idk about doing things better but I manage to get them done somehow lol
Wow...thats a lot of volks that you can pick and pull parts.
What rims are those mate. Hot damn they look good. Running spacers?
Hi man im going to do this 2 but i want to carbe it btw awesome car
Can you use the stock mk3 fuel rail on the mk4 intake manifold?
What does this do ? Aren't the specs exactly the same on both motors to the t?
Yo también hice esta modificación pero al acelerar el motor y soltar el pedal de acelerador regresan muy despacio las revoluciones Ojalá me puedas ayudar con ese problema
What wheels are u running?
I've noticed you've used that Trim and bumper paint in other videos, what kind of durability have you noticed from it? I just picked up a front lip for my 93 Corrado and it could do with some refinishing.
@Mk3Smith
6 жыл бұрын
Yes!! I love that stuff its worth using 100% lol
@timmilton473
6 жыл бұрын
Christian Smith What brand trim paint are you using. Just found your videos, going to use it to do this swap!🍻
Were lucky to have you representing VW and Jetta. I don't know what you do for a living. I would recomend new car sales. You would make about 80K your first year. 125K your second year. They would eventually put you in F&I where you would easely double that amount. There is a nice Mercedies dealer in Bend Oregon. Also a Porscha Audi VW BMW in Bend Oregon. The owner is dick but he pays well. Keep up the good work. Love the video/ Peace Out.
Unrelated question. I assume you've had rust that needed repair. We're you able to go to the junk yard and cut your own rocker panel etc yourself? If so what did you use, how long and involved is it
@Mk3Smith
6 жыл бұрын
Jeremy White actually my car is a Florida and has zero rust so I’ve never actually had to do any type of rust repair lol
@Mk3Smith
6 жыл бұрын
Florida car*
@jeremywhite8639
6 жыл бұрын
That's fortunate lol. My car's never left New England, coated in salt every winter
I've been really wanting to do this to my mk3, how much in total did the scrap yard charge you?
@Mk3Smith
6 жыл бұрын
It cost me about $120ish for all the pieces!
You need to start carrying an umbrella or get you a umbrella hat
@Mk3Smith
6 жыл бұрын
Facts lol
Should of grabbed a mk4 throttle cable. I did thid mod to my mk3, 9yrs ago
@Mk3Smith
6 жыл бұрын
Actually didnt need it the stock one worked fine lol are there any advantages of the mk4 one?
@VolksbarGarage24
6 жыл бұрын
Yea you dont have a crazy bend in cable cause the mk4 cable is like 10inch longer. Because your moving the throttle body to the opposite side now with thr mk4 mani same reason you extend the mass air flow wiring. When i did mine I took the wiring from the mk3 maf out at a junk yard i cut the harness back like 10inch and added it to mine so i didnt have to extend 4 wires and splice 8 times.
MINT!!
Were did you get the Volkswagen flag???
Where you get those shades from there dope👍
@Mk3Smith
6 жыл бұрын
@lazer_shark makes them!
VALVE COVER not valve cover gasket lol...