Are MIP the best RC tools? If not....which ones??

@RC-Overkill

10 ай бұрын

Never tried mip tools, because they hard to get in europe, but I use Hudy tools for 10 years now and I am satisfied. Would be nice to see a comparisons between the two brands

@michaellucre8249

10 ай бұрын

MIP FTW

@meirdeaph

10 ай бұрын

I think there worth every penny never stripped a screw or wore out

@slappomatthew

9 ай бұрын

yes. they are the best.

@kjflyte5088

9 ай бұрын

Mip is the best r/c hand tool.. I've snapped many other brands . Now if they could make some tuff lexan scissors lol jj...

“THE” RC Network?? Welcome back Rich

@TheRCNetwork

10 ай бұрын

Thanks buddy!

Whoah! Big exclusive on that new Tekno SCT. You heard it here first folks. Putting those MIP tools to good use building that. Can’t wait to see it.

@TheRCNetwork

10 ай бұрын

Thanks buddy! You getting one?

Great to have you back buddy. I've always enjoyed your content and have definitely missed you.

@TheRCNetwork

10 ай бұрын

I appreciate that! Glad to be back

Great video as always, welcome home!

@TheRCNetwork

9 ай бұрын

Cool to see your name pop up in the comments! Thanks for watching

Are you back???? Good to see you doing vids again!

@TheRCNetwork

10 ай бұрын

Not sure.....testing the waters 😁. Thanks buddy!

yooooo look who's back!😁

@TheRCNetwork

10 ай бұрын

Thanks buddy!

What a welcoming surprise, seeing a video from you. Hope all has been well!!

@TheRCNetwork

10 ай бұрын

Wow, thanks - it's a warm welcome back, indeed!

Nice to see you back!

@TheRCNetwork

9 ай бұрын

Thanks buddy! More to come

Wow its like they were reading my mind. Ordered one.

@TheRCNetwork

10 ай бұрын

It's a great bag...and compliments their great tools

What the heck! This was a notification I wasn’t expecting!

@TheRCNetwork

10 ай бұрын

Thanks Jack.....it's been about 2 years 😬

Nice to see you back🎉

@TheRCNetwork

10 ай бұрын

Thanks RCU! It's good to be back

Yay tool Tuesday 🎉. Hope this is a sign of more awesome videos to come. Thanks for the excellent video. Love my mip.yes they should do a speed bit handle.

@TheRCNetwork

10 ай бұрын

Thanks for stopping by. Yes, next Tuesday there will be a string of videos on the new truck

The very BEST is back! Welcome back my friend!Absolutely YES for the QUIK RELEASE speed bit handle.

@TheRCNetwork

10 ай бұрын

Wow, thanks for the kind words!

Excellent quality stuff, excellent quality video. Welcome back!

@TheRCNetwork

10 ай бұрын

Thanks buddy! This was a fun one to film

Dude, where have you been? It's been so long. Welcome back Rich. 👍

@TheRCNetwork

10 ай бұрын

Wow, thanks Vas! It's been a solid 2 years. I've been living the MTB world (riding 3-5 times a week) and recently got into Toyota Tacomas this past year. I sold off my entire RC collection with the exception of one 1/8th scale buggy (Tekno EB48 2.0) and haven't touched it since OCRC (my last and only local track) closed in December 2021. I've really forgotten how much work goes into not only RC, but filming and editing. I have 4 videos headed out next week....we will see if I can keep up.

Great to see a post from you Rich!

Glad to see you back

@TheRCNetwork

9 ай бұрын

Thanks buddy! 4 new videos released today

So glad your back man!

@TheRCNetwork

9 ай бұрын

Thanks buddy! 4 other videos launched last week, check them out!

Welcome Back!!!!!! Great video keep them coming!!!! We have all been missing your videos in the RC community.

@TheRCNetwork

9 ай бұрын

Thanks for the kind words! I dropped 4 videos last week - check them out!

My favorite channel is BACK!!

@TheRCNetwork

9 ай бұрын

Thanks buddy! 4 videos dropped today...go check them out!

Wow totally awesome seeing you back!❤❤

@TheRCNetwork

10 ай бұрын

Thanks, I appreciate that!

I‘m so excited you‘re’ back！！

@TheRCNetwork

10 ай бұрын

Thanks....it's good to be back

Best RC channel ever is back!!!!!!

@TheRCNetwork

10 ай бұрын

Thanks buddy! It's been a minute!

Good quality rachet tool is always a must.

@TheRCNetwork

10 ай бұрын

100% agree. I've been asking MIP for years!

Your videos are top notch glad your back ..love the build series you do ..no matter what kit you build there so awesome!! 👌

@TheRCNetwork

9 ай бұрын

Thanks buddy! It was a fun build. 4 videos released today - check them out!

Great to see you making videos again!

@TheRCNetwork

10 ай бұрын

Thanks Tom, it's been a minute!

Wow blast from the past good to see you back! Spent many an hour watching and learning, since then I've started my own RC related channel. Hope all is well dude.

@TheRCNetwork

9 ай бұрын

Nice! I'm doing great...just found an RC/tools worth doing a video on!

Thanks for another awesome review

@TheRCNetwork

10 ай бұрын

And thanks for stopping by!

Good to see you back.

@TheRCNetwork

10 ай бұрын

Thanks buddy!

Well dang! It’s good to see ya back Rich.

@TheRCNetwork

10 ай бұрын

Thanks buddy! It's a warm welcome

Awesome, welcome back. I suddenly have an urge to become interested in RC cars again. 😂👍🇦🇺

@TheRCNetwork

10 ай бұрын

Hey, Garszy - good to see your name pop up in the comments! Thanks for the kind words

Hooray!! about time, I’ve been using the Hudy case for my MIP tools. Looking forward to the Tekno series 🤙

@TheRCNetwork

10 ай бұрын

Nice! I had the Hudy set/case for a bit...it was quite a bit smaller than this one. Next Tuesday is the release date - 5am CA time. Stay tuned!

Yes! He’s back!!! 😃

@TheRCNetwork

10 ай бұрын

Thanks for stopping by!

Good to have you back, Rich ;)

@TheRCNetwork

10 ай бұрын

Thanks Roger!

Yes they shoud make a handle for the speed bits. Im using 2 Integy handles that work great for that.

@TheRCNetwork

10 ай бұрын

Yes they should!

MIP should DEFINITELY make a speed bit handle....!!! Surprised that isn't already a thing... This tool bag is just what I need, I have a Serpent one that has failing zippers, and the reason I love that bag so much is that it has the smaller elastic spots for speed bits... I think I'm gonna have to pick this bag up, along with a few new MIP tools to keep my collection up to par with my son's assortment of amber handled tools... Cheers, can't wait to see the SCT 2.0 videos!

@TheRCNetwork

9 ай бұрын

Agreed on the MIP handle! BTW, the SCT videos launched this morning. Watch them here: kzread.info/head/PL5_p3gwitPInOWACnchwgeIPUdbN1RY0X

Welcome back Rich !!

@TheRCNetwork

10 ай бұрын

Thanks Losiho!

Using my old Integy pouch. Has the clear plastic on the front to see those MIP drivers. Love the patriotic vibe!

@TheRCNetwork

10 ай бұрын

Nice!

MIP are the best all around RC tools for sure. Although if they could somehow incorporate a bearing top piece in their handles or maybe a 2.0 version and still keep the old ones they would perfection!! When I’m on my bench I find myself reaching for my Vanquish drivers just cause of that bearing top handle makes it so nice. OMG YES!!! MIP PLEASE MAKE A 1/4” QUICK CHUCK HANDLE!!

@TheRCNetwork

9 ай бұрын

100% agree! I've owned the VP drivers and wasn't a fan of the overly smooth, heavy handles...but the bearing was cool

welcome back mate!

@TheRCNetwork

10 ай бұрын

Thanks buddy!

Heyyy RC Network is baacckkkk

@TheRCNetwork

10 ай бұрын

Thanks for stopping by!

Enjoy your build. Maybe with some Rockstar if the formula is still the same.

Yes they should

@TheRCNetwork

9 ай бұрын

I agree!

You have a million dollars worth of mip drivers that must be really nice I only have three

@TheRCNetwork

9 ай бұрын

Naw, not $1M...but close

Mip shock pliers and Philips and flat head drivers!

@TheRCNetwork

10 ай бұрын

That would be really cool..especially the shock pliers...the Tekno's are my favorite to date and I've hade the Protek, Associated, and TLR

Yes

@TheRCNetwork

5 ай бұрын

Thanks for watching!

I use the wera 813r small handles with my MIP bits. I don't like the handles on MIP screwdrivers. You aren't beating MIP, they are a must have.

@TheRCNetwork

9 ай бұрын

Thanks for commenting and stopping by!

It's Tools Tuesday again! Thanks for your video! I consider Hudy Tools are the Best, but I think mip tools are very good quality too (only heard good things about), but they're not available in Europe. For the ratchet, I like the tamiya one the most. Thanks again for your content

@TheRCNetwork

10 ай бұрын

Thanks buddy! Yeah, I think RC tools are geographical based on availability. Hudy are great, but very expensive in the US if you can find them. I'm sure the same goes for MIP in Europe.

@RC-Overkill

10 ай бұрын

​@@TheRCNetwork Yeah you're right! I would love to try the mip tools, maybe they get an eueopean distributor in future. However, it's great to see an upload from you👍 please continue making content 🤞

@TheRCNetwork

10 ай бұрын

Thanks! Yes, should have 4 videos being released next Tuesday AM. Stay tuned!

Hey Rich they made the handle we have been asking for

@TheRCNetwork

3 ай бұрын

Yeah, I heard a couple of days ago and pre-ordered one. I'll say - I had lunch with Eustace (Owner of MIP) in 2017 and told him the things that his company was missing: 2.0mm ball end, MIP tool case and a 1/4" QR Amber Handle. I'm thinking I wasn't comped for my ideas....

@odomandr

3 ай бұрын

@@TheRCNetwork yeah I agree. Can we get some part time remote work opportunities where we develop product ideas and are compensated for suggestions??? Just a couple hours a week I could submit it as contract work if needed

Now if i could get the Standard set in black , i have the blk metric set.

@TheRCNetwork

9 ай бұрын

I believe MIP just released the Black handle tools as a limited edition. They can only be bought on their site though.

I vote: yes, they should.

@TheRCNetwork

10 ай бұрын

Nice!

They definitely should do either a ratcheting 1/4dr handle or just a 1/4dr bit holder. I personally am using a pair of Hudy handles for my 1/4dr bits I have a dirt pick as well but mine is an old 0.50 Thorp wrench I broke the tip off instead of a 1.5mm all my SAE orange handles are OG Thorp BTW only my metric and nut drivers are MIP 😂

@TheRCNetwork

10 ай бұрын

Ratcheting would be cool....I just want a fat amber handle with that speed bit QR. Last time I spoke to Eustace, he actually bought Thorp with a license agreement for so many years and then it would be 100% MIP's at some point. I forget the dates and times, but I believe it's all MIP now. They fully adopted all of Thorp's practices and efforts on the tools which is a good thing

What time zone you doing this from? So I can plan on time difference!

@TheRCNetwork

10 ай бұрын

The Tekno series will be going up on my channel starting at 5am PDT (CA time) next Tuesday (October 17th). Should be 4 videos, all up with in an hour starting at 5

Welcome back where u been?

@TheRCNetwork

9 ай бұрын

I thought I retired from making KZread videos...but then Tekno has to come out with a new truck! 4 videos released today

Mip does have a speed handle

@TheRCNetwork

20 күн бұрын

@@redstar199 now they do…..bought it when released about a month ago

Hello can i pre order the Tekno SCT410 2.0??

@TheRCNetwork

10 ай бұрын

Dealers were just given the details this morning. They should have pre orders ready by end of today. I know Fierce Pete is always quick to get them up...larger retailers like Amain may take some time. I believe Tekno will have them ready to ship by the end of the month though.

@linusfredriksson6554

10 ай бұрын

Ok bro love your vids

I think this should be been out years ago. Why does a killer tool company not have this already.

@TheRCNetwork

10 ай бұрын

100% agree. I mentioned the tool bag, 2.0 ball end and the 1/4" speed bit handle many moons ago!

That is what support was telling me about?

@TheRCNetwork

10 ай бұрын

Most likely. They've been saying they were working on a newer "outdoor" SCT for a while.

@joeddejohn

10 ай бұрын

@TheRCNetwork I've been out of the loop for a while. Just the last month learning a little about the Tekno line up. Not sure the differences between the the.1 .2 .3 versions or what parts support is like. Seems like a model is active for something like 6 years. The MT410 looks interesting but don't have 8th scale electronics for it. If I go with the SCT would throw the Tekin system from my TLR SCTE 2.0 in it.

@TheRCNetwork

10 ай бұрын

The SCT410.X is not discontinued in wake of the SCT410 2.0. Tekno has great part support in the US, either locally or online. Tekno direct usually ships out next business day and arrives pretty quick, as does Amain. The MT will need 1/8th scale electronics and a 4s minimum Lipo. In comparison, the TLR SCTE 2.0 vs the SCT410 2.0 - you will see a massive improvement in handling, durability and steering and your electronics will drop right in

@joeddejohn

10 ай бұрын

@TheRCNetwork Thank you Rich. Great point about the 4s lipo especially if Thunder Power. Also about the steering. On the Losi scte you are right the steering wore out so fast.

Where you been?

@TheRCNetwork

10 ай бұрын

Little vacation....😁. 4 videos being release next Tuesday on the new SCT410 2.0. Stay tuned!

Road to MT410 2.0 .....................................

@TheRCNetwork

10 ай бұрын

Quite possibly.....I believe they stated that many ET48/EB48 2.X upgrade parts will work on this platform.

Wait what?! Richard didn't ban RC from his existance ?!

@TheRCNetwork

10 ай бұрын

😂 not ban...just reduce by a lot! I have two RC's now....and that's double from about a week ago.

Click play faster than a Concorde in a high speed Dive!!!!

@TheRCNetwork

10 ай бұрын

😂 😂 😂 Thanks for stopping by!

Another “tool Tuesday” like you haven’t been gone 2 years…. lol

@TheRCNetwork

9 ай бұрын

You musta missed the 4 videos that released yesterday then…..😳

@ARR5ifty

9 ай бұрын

@@TheRCNetwork no, no, I seen them that’s why I had to back track to this and see what was going! And now I’m glad you made a comeback!

Wow, new video from @thercnetwork ??

@TheRCNetwork

10 ай бұрын

Oh, you know it!

@lowjack100

10 ай бұрын

yikes what have you done with rich

@TheRCNetwork

10 ай бұрын

@@lowjack100 😂