Very well done, Mike. I look forward to the next videos!

@cornfieldcustoms

9 ай бұрын

Thank you very much! hope your doing well Ron

Very clear explanation of shrinking/ stretching - best I've ever heard !

@cornfieldcustoms

9 ай бұрын

Glad it was helpful! Thanks for watching

This man is a master of his trade . So refreshing to see that there is still skilled people out there that have pride in their work .

@cornfieldcustoms

8 ай бұрын

Thanks but i am far from a master

I appreciate the details you dive into versus others that leave out all this pertinent gold you are giving us. Thank you Mike

@cornfieldcustoms

9 ай бұрын

thanks for watching

@cornfieldcustoms

9 ай бұрын

@@stanstelmach5326 the material gets thicker at the shrank area. So the material is compressed. If the grains dont move and stack up how would the material get thicker in the areas of shrink?

Thank you. Can't wait for the part 2

@cornfieldcustoms

9 ай бұрын

Coming soon, thanks for watching !

Thank you very much for this video, looking forward to the pt2!

@cornfieldcustoms

9 ай бұрын

thanks for watching part 2 coming soon!

One thing that still boggles my mind, despite watching yours and several other explanations, is how the thumbnail die works - my brain wants to believe that the metal would just end up right back where it started as you pull back out, yet it doesn't. I still can't quite wrap my head around how the die doesn't just simply "undo" the tuck :)

Great content Mike, this is the stuff 😊

@cornfieldcustoms

9 ай бұрын

Thanks

Excellent explanation and demonstration. Glad I found your channel at the recommendation of Make it Kustom.

This is great thanks ,i am 78 and still learning can.t wait to see more Bill

@cornfieldcustoms

9 ай бұрын

More to come!

First one I’ve seen in one piece. Beautiful! Thanks

I was just looking at that post earlier this evening trying to figure out how you did that wheel tub in one piece. Great explanation of the process. Thanks for sharing this. ✌️😁

@cornfieldcustoms

9 ай бұрын

Thanks for watching

Awesome work with great visual and audio to boot ! From Down Under 🦘 Cheers Andy

Well explained video, slowed down well to digest and process Looking forward to the next two or three to button them up

@cornfieldcustoms

9 ай бұрын

thanks for checking it out, hope to have 2 more on making this part

Nice to meet you, Karl said you were informative, He was right Thanks for the video

Thanks for paying attention to the comments asking to show this process and making the videos. Really good content, especially for those that can't take the classes.

Absolutely incredible. Thank you so much for sharing. Fantastic explanation and very well spoken! The drawings are great also!

Thru out my shoulder beating on my tree strump making art deco full fenders for my oxy/acetylene cart. Got bored one night. But gosh darn it those tubes look sexy. Great video

@cornfieldcustoms

9 ай бұрын

i am always way more sore after doing shaping by hand than working large panels in the hammer

Nice Work. Looking Forward to Seeing More. Thanks. #STAYSAFE #PHILLYPHILLY🇺🇸

Impressed by your work and how you explain!

@cornfieldcustoms

9 ай бұрын

Thank you very much!

Enjoyed watching your video very informative and clear tips 👍

Thank you so much, your a great teacher, looking forward to part 2

@cornfieldcustoms

9 ай бұрын

thank you, part 2 coming soon

Thank you for the video Mike I am forming some rockers and floor pan for my truck without even the simplest body tools. still this is education for the soul. Will make a Bonsai to honor your commitment to quality.

@cornfieldcustoms

9 ай бұрын

Right on

Nice work and explanations. It amazed me to see this done. Have a great day. 👍

@cornfieldcustoms

9 ай бұрын

Thanks, i appreciate you checking it out

great explanation can't wait for the next episodes

You killed it Mike. I even made my wife watch and listen to you explain stuff. One extra potentially helpful thought on teaching / explaining - perhaps a pencil sketch of the thickness of material in the shrunk zone through a cross section diagram - help is see where the material is being moved to and how that causes panel to spread in places and contract in others. Keep up the good work Mike. You have a gift to teach. You also just a humble guy. God bless. Aaron.

Brilliant explainer...still don't think I'll ever do it, but if I did I'd be replaying this video quite a few times to get schooled up. Nailed it!!!

Science = Organized knowledge. I'd say that was in and itself the best explanation and demonstration I've ever seen on how metal forming is done. Unbelievably cool 👀

Amazing!

@cornfieldcustoms

9 ай бұрын

Thanks

Absolutely amazing work, thanks for sharing. I understand shrinking and stretching from my blacksmith training, but this is another level. Great work can’t wait to see more.

Thanks for the straightforward explanation.

Hands down...absolute best shrinking explanation and demonstration on shrinking I've ever seen. You have an amazing talent to teach as well. Thank you for your commitment to share!!

@cornfieldcustoms

9 ай бұрын

Thanks i appreciate the kind feedback and that you watched the video.

Great video thank you for sharing your knowledge

@cornfieldcustoms

9 ай бұрын

Thanks for watching

That is spectacular workmanship.

@cornfieldcustoms

7 ай бұрын

Thank you

Thanks for sharing, always interesting and informative!

If l was a young man l would be at your door looking for a job. This work is fascinating! You sir are a genius and a master of this art. Outstanding teaching skills also. I can’t say enough good about you! Keep up the videos… please!

Very well explained process. I have made a set of these dies for use in a Pullmax and they work very well.

By far one of the most informative videos that I have ever watched your detailed explanation was spot on

Drawings looked spot on bro

You are an excellent teacher Mike. You make a complicated subject easier to understand. Thanks!

Great video, this made the lightbulb come on :-) thank you.

@cornfieldcustoms

9 ай бұрын

Glad it helped! Thanks for watching

Great video Mike 👍

@cornfieldcustoms

9 ай бұрын

Thanks man 👍

Thank you some much for sharing and explaining this. And for doing it so thoroughly

Thank you very much for sharing your expertise on KZread. Very interesting. You do a great job of explaining the whole process of shrinking metal. You do amazing work. Thanks again.

@cornfieldcustoms

5 ай бұрын

Thanks for the kind words and watching

Very informative .. cannot wait to see the rest of the process ! Truly incredible !

@cornfieldcustoms

9 ай бұрын

thanks for watching glad you enjoyed it!

Thank you for taking the time to share your knowledge and explain how it works so easily. Enjoy watching an artist work.

Great video. I can't wait for part 2.

Learning at this level is never boring. Please take as long as you like. Real time video is monkey see monke do. 👍

Great info as always!

@cornfieldcustoms

9 ай бұрын

Thanks again!

Thanks for the detailed and knowledgeable tutorial man 👌👌👌

@cornfieldcustoms

9 ай бұрын

thanks for watching

Wow. That is some serious shrinking and stretching of metal. Nice job! 👍

@cornfieldcustoms

9 ай бұрын

Thanks

Utmost respect to you metal worker guys. Really impressive to craft something so clean out of what seems like such difficult and unforgiving material. Interesting and informative video!

GREAT TUTORIAL MIKE, THANKS

@cornfieldcustoms

9 ай бұрын

Glad it was helpful!

Been watching you for a while now but just subscribed - I'm a big fan of metal guru's! Great work and thanks for sharing. Cheers.

@cornfieldcustoms

9 ай бұрын

Awesome, thank you! I appreciate the Subscribe

I had no idea that it was even possible to bend theae in one piece. Impressive!

@cornfieldcustoms

7 ай бұрын

Thanks, and thanks for watching

AMAZING information!! Incredible! Thanks for sharing your knowledge

Great video , you're explanation of the process is spot on I knew exactly what you meant as you explained it. That power hammer is a beast , the question I have is can you get the same results with a smaller power hammer ? , not everyone can afford a machine that size.

@cornfieldcustoms

9 ай бұрын

thanks for watching. Yes smaller hammers are more than capable of doing these parts. I have a smaller hammer that i used to make these on. I just use the big hammer on everything now

Oh so much easier than when I was an apprentice we had to do this very same exercise using only a blocking hammer and a block then later hammer and dolly. I prefer this method.

Really great video on a complex subject.

@cornfieldcustoms

9 ай бұрын

thanks for watching

Thank you for sharing this information Sir.

@cornfieldcustoms

9 ай бұрын

My pleasure

Thanks Mike! Great video, loads of good information. A key takeaway for me is to focus on getting the shrinks to accurately form the radius of the bend before worrying about the floppy outer edge. I know how much extra effort it is to produce videos on top of actually getting work done, much appreciated!

@cornfieldcustoms

9 ай бұрын

Thanks for watching, start and stop points are super important and often over looked

More of this i watch, the more i understand.

@cornfieldcustoms

9 ай бұрын

Thanks

👍👍😎👍👍 fantastic demo - thank you

I would love to be able to work metal like that. Very skilled work.

@cornfieldcustoms

9 ай бұрын

Thanks

Great work.

@cornfieldcustoms

9 ай бұрын

Many many thanks

Thanks man , explained very well 😎👍

Great video!

@cornfieldcustoms

9 ай бұрын

Thanks!

Very helpful. Thanks for posting.

@cornfieldcustoms

9 ай бұрын

Glad it was helpful! Thanks for watching

@rowycoracing

9 ай бұрын

@@cornfieldcustoms I tried making that piece on my MH19 early this year. I never could get the wavy part to come all the way over and tighten up the piece. After watching your part 1 I am thinking that I didn’t have the hammer blow intensity set right. Ultimately I ended up making the pieces in 2 parts using a round over die (covell tank die) in the bead roller and then welding the center of the radius. They came out OK but not great. After I watch you finish the one that you are making I will try making mine on the hammer again. I never installed the ones I made in the spring. Anyway thanks again for the post. It is much appreciated.

Very good ... Matt Precision Panel craft... Closing the panel a bit can help shrink.

@cornfieldcustoms

Ай бұрын

Thanks but i have it under control

fascinating process

@cornfieldcustoms

9 ай бұрын

Thanks, it changes the way you think about making parts when you dive into shaping

Wow, Absolutely one of the best teaching video's I have seen! I love seeing that wheel well made in one piece, and I love power tools, I understand they cost a lot of money, but doing it by hand kills my shoulder just thinking about it!

Thank you Mike!

@cornfieldcustoms

5 ай бұрын

Thanks for watching

This is awesome!! I’ll need to make similar wheel tubs for my project soon, so to see them come together is very inspiring.

@cornfieldcustoms

9 ай бұрын

thanks for watching , hopefully it was helpful

@RevengeCustomPaintCo

9 ай бұрын

@@cornfieldcustoms it was!! I was trying to get my head around how to make the radius happen without wrecking the area that need to remain flat. Can’t wait to see part2!!

G.R.E.A.T. VIDEO. Thank you

Awesome 👍

@cornfieldcustoms

9 ай бұрын

Thanks

wow, I'm just stunned!

@cornfieldcustoms

9 ай бұрын

thanks for watching

@rsigrowers3587

9 ай бұрын

@@cornfieldcustoms watch nothing!, I want to go live in your shop for a year and learn what you know

Great vid 👌

@cornfieldcustoms

9 ай бұрын

thanks

Great explanation,

@cornfieldcustoms

9 ай бұрын

Thanks for watching

great video thanks

@cornfieldcustoms

3 ай бұрын

Thanks, make sure to check out the rest of the series on it

Don't sell yourself short on your drawing skills. Although I've seen the thumbnail dies used plenty the view you chose and talking about being pulled back thru finally made sense to me for the first time. Kind of a "lightbulb" moment for me.

Much appreciated

@cornfieldcustoms

4 ай бұрын

Thanks for watching

Great video. I'd like to take one of your metal shaping workshops

@cornfieldcustoms

9 ай бұрын

Thanks for watchign, That would be cool if you come to a class !

Great

@cornfieldcustoms

9 ай бұрын

thank you

WOW

Top marks

Nice drawings

@cornfieldcustoms

9 ай бұрын

Thank you so much 😀

Great explanation! I'm struck by the difference between what you can accomplish on the big power hammer and others I've seen using hand tools or smaller spring powered hammers. That thing is a beast.

@cornfieldcustoms

9 ай бұрын

thanks for watching.

Thanks for the video...I'm heading back to the shop to practice 😊🏁👍

how cool is this video

@cornfieldcustoms

9 ай бұрын

Thanks for checking it out

Mike very good explanation, thank you, what type of steel do you use A K deep drawn metal? Can’t wait tell the next video, thank you once again.

Amazing knowledge and abilities. I am assuming you made many "mistakes" along the way to get to this point of your learning abilities. And I also assume you didn't start with the power hammer machine, but hand tools as you progressed. So that is where most of us are presently working with metal forming. Thanks for the lesson and video...

I'm in for episode 2 for sure! My question is if you didn't have a power hammer would you split this into 2 pieces?

@cornfieldcustoms

9 ай бұрын

yes if you were doing this with hand tools or some lighter power tools 2 sections would be the only way to achieve it, unless you spin it and cut out, but that a whole different topic

This was a great video, you're a great teacher Mike. If you were to make this part with a mallet and stump, you'd have to flip the panel, right? When you crush the tucks with a mallet, the panel is pushed outwards (convex). I'm trying to figure out how I could do something similar with hand tools.

@cornfieldcustoms

9 ай бұрын

if you were to make this with a mallet and a stump you would have to make it in 2 pieces and weld them together

Malleability, tenacity, and elasticity between materials also .

Are you using AK material? Great explanation on the process. Thanks

@cornfieldcustoms

9 ай бұрын

No just standard cold roll

thanks for this nice explanation. I have just one question. You said, it is essential to stop right at the line. Where actually are stoping in regards of the die? Is the outer flat area not crossing the line or is the tuck going til the line?

@cornfieldcustoms

9 ай бұрын

You dont pay attention to the die. You stop the shrink at the line. Not the die or the tuck itself. There is an area just in front of tuck thats kind of a horse shoe shape thats what is stopped at the line. Its the front edge of the shrink

@thorsten_w

9 ай бұрын

@@cornfieldcustoms Thanks for the explanation

well actually you can also drill metal draw it, upset it, and rivet it, but I suppose thats a differant type of metal work and names for much the same concepts but you say you offer classes and lessons in shaping and crafting? hmm sounds like I might be interested if I had the time. but thanks for showing us the layout, its so seamless its a work of art

@cornfieldcustoms

9 ай бұрын

Drilling is a form of cutting, drawing is a form of stretching it, riveting is a form of attachment

@cornfieldcustoms

9 ай бұрын

Upsetting is thickening = shrinking

@manga12

9 ай бұрын

@@cornfieldcustoms ah yes but you said welding, a differant method of attachment, and of course the operations I mentioed have more to do with bar stock or slug metal not thin plate or sheet metal, but I guess you do thick stuff too bending frame and tube and its crazy how well it works without even kinking the metal heh, I guess I am trying to be a wiseguy thats a big hammer, how much force does it hit with at max pressure per blow, I am more familier with forging type power hammers or presses which have the force of the ram or weight of the hammer, not necessarily the blows per minute.

@cornfieldcustoms

9 ай бұрын

welding and attaching are totally different things. lets say you have 2 pieces of .500 1018 Mild steel. You forge weld them together ( 100 % clean, no cold shuts, or delam, a perfect forge weld) , what do you have? 1 solid billet of 1018 mild steel. you can not go back in and separate the 2 back into their own individual pieces. now take 2 identical pieces of .500 1018 Mild steel, you rivet ( bolt, tape, glue, zip tie) the 2 pieces together, What do you have? 2 pieces of 1018 mild steel rivet ( attached ) together. you can easily knock the rivet out and you are back to the 2 individual pieces you started with. Welding and attaching are different theories and i was not talking about attaching since it doesnt have anything to do with the 5 core principles of modifying a ( singular) piece of metal. it doest matter material shape size or thickness, you want to modify a piece of metal you are shrinking, stretching, cutting, bending, or welding.

@manga12

9 ай бұрын

@@cornfieldcustoms right but I was playing devils advocate since they weren't mentioned by name, so how much force does the powerhammer hit with at max pressure curious to compare to a forging power hammer.

Do u stop the shrink on the radius line with the front or the back of the thumb nail

@cornfieldcustoms

9 ай бұрын

Neither, you stop it at the point where the shrink stops. In the video at the point where i show you the unclosed tuck, it is the front U shape of the tuck. You stop that U at the line

@chrismawby6241

9 ай бұрын

@@cornfieldcustoms thank u for clarification it makes sense to me now

Just subscribe was recommended by make it custom 👍

How hot can these panels get when you're working them?

@cornfieldcustoms

7 ай бұрын

they get warm from shaping, not hot enough to burn you or anything