I hit the button and I got distracted by something and when I looked back at the screen Cleetus was riding a motorcycle attached to ropes. And I wasn't surprised but I was a little confused,lol.

@cheyneseyfert769

3 жыл бұрын

Of course I wasn't surprised either

@mc-dev

3 жыл бұрын

Florida man gotta make some kinda hills

@Cosm1cCream

3 жыл бұрын

@@mc-dev pahaha

@magia5035

3 жыл бұрын

Change the turbo and the injectors and tune it. Or just fit a K series.

@Sun-ut9gr

3 жыл бұрын

It is how a Florida Man do sometimes lol

Full time PWC Shop owner here: Pull the floating hat, jet pump and driveshaft out and you can pull the engine straight up out of the hull instead of trying to pull it forward off the driveshaft, inside the PTO coupler on the engine is a little plastic sleeve that is pretty easy to break and if it is broken and you run the engine, the driveshaft will pingpong off the crankshaft and wipe out the thrust washers. Your X3s have the same engine as the Seadoo Spark, the 900ACE, those RXT-Xs use the 1630ACE, The successor to the 1503 supercharged engine that is in my $500 Seadoo I'm hoping to get time to start getting progress and videos out on soon, once I get it running, I'll dial it up to 255hp from the factory 215hp it had. I'm excited to see where your boats go, from what I've seen tuning is incredibly limited, tuning licenses from riva are like $500 per vehicle, and then it only loads preset tunes, if you want to actually do a custom tune you have to use their software and pay an extra $250 per vehicle, plus their special maptuner hardware is another $400. Tuning jetskis is an interesting predicament because they run most of their life full throttle full load, like the longest dyno pull in the history of forever. I would imagine you will need to re-pitch your impellers/props to accomodate for the much larger hull having a lot more drag, generally these engines are meant to turn about 8k rpm at wide open throttle, and the hulls are "drag limited" to stay there when in motion on the water, if you're below that you aren't getting all the hp, and if you've above that, you'll just be pounding the rev limiter and if you back off the throttle to keep it at 8k you still won't be getting the hp you paid for, and may be running lean.

@otm646

3 жыл бұрын

$1000 each for a tune is nothing for these guys. Plus the amount of exposure a local tuner would get is 100 times the price of what the tune costs. Someone's going to donate the time and tunes for some exposure.

@trythistv

3 жыл бұрын

@@otm646 oh for sure, although I would highly suspect there are few "professional" pwc tuners out there, or at least for sure there are none remotely near our lake. I work on tons and tons of skis every year, and only end up doing anything performance related maybe once or twice a year, 99% of customers just want maintenance and repairs. Even simple stuff like adding 40hp to a Sea-Doo like my $500 RXP can be done for well under $1000, likely about $400-600 including a new polished prop to utilize that power, and not a single person is remotely interested. Being on the coast may be a completely different story though, idk

@Tebbylous

3 жыл бұрын

@@trythistv Dang, I often talk shit about youtube comment sections but it's always nice scrolling through and hitting some gem of knowledge. I'm from the area of the world where snow-mobiles are more our thing and I had always sort of figured jet-skis were in the same ballpark of tune 'em and send 'em -- interesting to know though. Hadn't even considered that these things spend most of their life at wide-open-throttle.

@TristosLife

3 жыл бұрын

This is so wholesome oml

@longstroke1982

3 жыл бұрын

I'm sure JP RACING ONLINE would be glad to help out. Looks like he's somewhat local also.

i feel like cleetus never runs out of content, one day he's fixing his race track the next he's pulling jetski engines for a project

@wilfredtv5931

3 жыл бұрын

Yeah man I don’t recon he gets bored!

@saimamerzougui7981

3 жыл бұрын

kzread.info/dash/bejne/oZqHxLqxkrvVfdo.html

@ovodrizzy6856

3 жыл бұрын

You would never run out of fun shit to do if you had the money to do it! Haha

@milburn420

3 жыл бұрын

He has so much shit at this point something always seems to need fixed lol

@frankz5864

3 жыл бұрын

I feel like Cleetus never runs out of coin

I like how James lets Cleetus do his boat first and then James can avoid any mistakes. Lol.

I'm starting to realize that this channel is just becoming "What happens when you give a group of Florida men a huge budget and let them loose" and I am 100% here for it. And mad respect because you guys deserve it

"this is a thing of some sort" - James Taal

@todddalton123

3 жыл бұрын

I thought the same way I say put it on a t shirt

@techguy3424

3 жыл бұрын

Words to live by

@backwheelbob46rr

3 жыл бұрын

Literally just about to write the same 😂😂

@cherr6red

3 жыл бұрын

Legendary

@B-U-C-K-S-H-O-T

3 жыл бұрын

Bro that got me! I was comin here to put what you did. Roflmao!

James most of the time: insanely detailed, smart description of everything James today: "Oh this is a thing of some sort"

@briantruck2284

3 жыл бұрын

😆 it's not an Ls engine

@dayzlonewolf

3 жыл бұрын

We got a tech deck set😅😂

I don't think anyone on KZread is building more than Cleetus McFarland..Maybe Randy from Savage Garage and DDE..But Cleets def got a handful of badass projects going all at once... Hell Yea Brothers!

next up: “building a jet boat race course next to the freedom factory”

@onewaycal7037

3 жыл бұрын

Around it

Y’all need to run those bolts in with some kind of marine grade sealant. At the marina I work at we use life seal on anything that may need to be removed in the near future and 5200 on permanent installations

@ka0tyk

3 жыл бұрын

3m 5200 if you want to use a jackhammer to remove it. Regular 3m marine silicone at the bolt holes would be more than adequate. I see leaks in the future, especially at 70mph.

@D_Hill

3 жыл бұрын

agreed

@rocketsurgeon11

3 жыл бұрын

@@ka0tyk 4200 can be removed easier. The thing is, I don't know if it will stick to UHMW plastic. I am also worried about galvanic corrosion because I bet those are stainless bolts going into an aluminum hull.

@WarefareModern3

3 жыл бұрын

@@rocketsurgeon11 4200 would be great. If they’re taking these things in salt water they better use some anti seize or they’ll all be seized af when that plastic needs to be replaced.

@NovaNinja_

3 жыл бұрын

I'd use 5200 or Bostik 920. Or at least 4200 or a decent windshield urethane... You'll still be able to get the bolts out with an impact as long as you don't fill the heads lol. Better to have the guard stuck on good than have half your bolts leaking in Alaska lol

I think I still like so much about this guy is, even with an operation going, with probably a dozen or more full time employees, he still is always there in the middle of all the meat and potatoes of builds. I respect that. He could have easily turned this channel into basically highlight videos of the cars after the work has been done because of his operation size. Thanks for staying true to how it all started and please don't ever change, no matter how big you get.

Petition to make James' boat wrap a Miami Vice inspired wrap? It needs to be neon colours, bright and in your face, especially considering what yall are planning on doing with it lol

Shoutout Garret right now. Managing two businesses, multiple employees, filming and editing the KZread videos. Florida man right here and his awesome team!

CLEETUS LISTEN UP. YOU NEED SEALANT ON THOSE SCREWS! THEY WILL LEAK IF THEY DO NOT HAVE SEALANT. TRYING TO HELP YOU AVOID A DISASTER. HELL YEA BROTHER

@theislandsc

3 жыл бұрын

Was thinking the same thing. It needs 5200 or at least 4200.

@whitey3

3 жыл бұрын

Makes sense to me. Should they not be countersunk more also?

@RyanGribble

3 жыл бұрын

@@whitey3 flush is fine. But silicone is a must.

@tarungonneea4614

3 жыл бұрын

@@theislandsc I completely agree. I learned my lesson the hard way. Don’t want to see them end it in a tight spot when they can fix it with a trip to west marine or just order some 3200. Off of amazon

@derekbader130

3 жыл бұрын

Hmm, yeah some silicone likely would have helped. But I'm sure they'll seal up just fine regardless for now. They do have bike bilge pumps as well...

Cleetus, thank you so much for being the most genuine, understanding person on KZread. I appreciate what you allow us to tune into and also for keeping it real. You are an outstanding person with a great head on your shoulders. Keep it rockin’ bub this channel is outstanding! Much love

Tye has brought the team so far since this video with his fab skills

Now take all the bolts back out and put a thread sealer on them.

@javinhunt1199

3 жыл бұрын

My thorts exactly. I was thinking seal around perimeter of it to stop water getting between it

@1STGeneral

3 жыл бұрын

Phil Swift approves 👍 this comment and the flex seal family of products also 👌

@batsonelectronics

3 жыл бұрын

I was thinking sealer and locker as well.

@berryreading4809

3 жыл бұрын

The corrosion will do that step for you 👍😄

@OlaCurtius

3 жыл бұрын

Lets hope it’s not SS bolts

The time-lapse music will always remind me of Rocky Mountain Raceweek.

@SirVic42

3 жыл бұрын

The Ballad of Cleetus McFarland.

Cool project. I will say the large windscreen on the Cleetus boat reminds me of those $3 reading magnifiers for older folks. I'd put convex glass into the windscreen so the pilots head would look HUGE viewed from a distance.

James should change his boat’s name to “Regret”. Going to Alaska, no windshield, uh huh...🤣🤣🤣

@steveletson6616

3 жыл бұрын

I have seen a couple roll over and I would take the big windshield, reinforced. And with padded bars, and extra tall shock absorbing seats. There's a 50/50 chance they quit or blow them up before getting seriously injured or worse.

I'm surprised there isnt a McFarland marine t shirt yet

@covertsolid1

3 жыл бұрын

Might have to clear it with Uncle Finnegan but , "Mc Farland Speed & Marine"

@retsaoter

3 жыл бұрын

@@covertsolid1 i bet Finn would laugh his ass off if it was exactly the same as his but a tiny Mc in front of FSM.

@johnrogers9744

3 жыл бұрын

Oh yeah that would be funny, maybe ole cleet has something up his sleeve

@whiskeythetwisty5564

3 жыл бұрын

Just you wait. With these new boats, they will come as soon as they are on the water

Definitely see some potential water coming in through the holes after drilling all those screws into the bottom without no epoxies or even silicone.

@christophercarlisle9216

3 жыл бұрын

Seeing as how the boats still don’t have any Motors, I think there is a little time on the table to button those odds and ends up!

@th3R0b0t

3 жыл бұрын

Such is life with watercraft. They can slap a nice bilge pump in them jet boats and be A-Okay.

@jerrybaldwin7543

3 жыл бұрын

Always that one person knows everything about everything

It’ll all be worth it as soon as you hit the water. My mini boat is the best thing I’ve ever bought. Pretty much hung up all my other hobbies. All jetboats, all the time 🤘🏻

My jetboat build was from an existing hull, a 1997 Duracraft 1648 SV, with a Yamaha FX High Output engine. One day I want to build another one with a thicker hull and UHMW for going into areas with rocks. I run mine strictly in coastal waters and rivers, but never above the fall line where there are rocks. That takes a specialized boat, like the one in this video.

I’ve been waiting so long, seeing these in the background for a while now

@bringbackhipv

3 жыл бұрын

I feel like for 6 months now. I’m super into seadoos too

@thedude8046

3 жыл бұрын

Here they are, in the background!

@CleetusM

3 жыл бұрын

Took us a bit. I wanted to wait to buy them but this deal was so good

@LemondzzPvP

3 жыл бұрын

@@CleetusM it’s gonna be so worth it!!

@Huda88754

3 жыл бұрын

@@CleetusM leroy still getting bigger turbos?

I’v never seen a giraffe on a dirt bike swing, looks like there’s a first for everything😂

@Cosm1cCream

3 жыл бұрын

Paahahahaaa😂😂

@jasonaldenhaley1

3 жыл бұрын

And it's gotta be the pit bike size too (for that MAXIMUM ridiculous look)!!

@MEOIT83

3 жыл бұрын

Soon we will see a giraffe in a mini boat.

@FODteam

3 жыл бұрын

You win today sir. You win.

@christiancampbell-sanderso5998

3 жыл бұрын

you must've missed and episode, almost positive he had a swinging kx intro before

far out that cut with the circular saw was terrifying, so easy for it to kick back cutting like that

Hell yeah ive been waiting for another build video on the Jet boats. Can't wait to see more of these videos. Love the fabrication aspect of this series.

Can't wait to see you, James, and Blake Wilkey shooting around in those things next summer. And, maybe set up a sprint boat course at the Freedom Factory?

@DonovanLeach

3 жыл бұрын

If they dig out the canal more they can drag race

@jasonaldenhaley1

3 жыл бұрын

Fences seem tall enough to keep 'em outta the crowd Mustang style i think. Would be F-N MINT🤟

@eddominates

3 жыл бұрын

plug the drains and fill the place with water like the dang Romans did

@jasonaldenhaley1

3 жыл бұрын

@@eddominates thinkin some bull sharks & a 12 pack of 10 - 13 foot alligators...keep the pit stops real fast!!! Ya know..."incentive"

I feel like you should have put silicon in each bolt hole to seal it

@sycho89

3 жыл бұрын

This comment needs more attention! You have to use some kind of sealant on the bolts for the bottom liner.

@kevinsellsit5584

3 жыл бұрын

3M 4200 is the ONLY correct and required product for this job. Use 3M 5200 when you will never need to remove the part.

@derek10w

3 жыл бұрын

Flex seal for life

@bottycarmods

3 жыл бұрын

@@derek10w i was about to say, it will leak over time :(

@kevinsellsit5584

3 жыл бұрын

@@derek10w Unlike metals tend to corrode. I am well studied in metallurgy and galvanic corrosion. If you want to discuss these subjects with regard to under the waterline marine applications I am ready now. Are you?

"This is gonna be a lil hard to decipher" "This is a thing of some sort" Never change boys 😂

I am a luxury yacht builder in Thailand and those are going nicely. however I sure would have put some SIKA 291 on every screw shaft. Tear it up fab shop!!

James' comment about being able to build the tech deck skate park was hilarious.

Not gonna lie, wish there was a full episode of jet ski hooning before the tear down

Cleeter with the carpenter skills, that is exactly how you make those sort of cuts.

Cleet you're going to effin love that IBR it's so damn cool! On my ski I go from 50 mph to dead stop in about 20 feet!!!!

Within 6 month James will have figured out how to put an LS in his!

@benwan5425

3 жыл бұрын

I think u mean 6 days

@insanereindeer4081

3 жыл бұрын

You don't want to do this. You want them to be as light as possible. They're already heavy enough when you're stuck on the rocks.

@andrewchao9164

3 жыл бұрын

i think you mean a boat under his LS

@davidjessee7701

3 жыл бұрын

At least a 5.3

Anyone else think the time lapses music sounds like a PlayStation 1 bass fishing game music?

@williamdelozier4064

3 жыл бұрын

I was thinking farming simulator lol

@IIRadium

3 жыл бұрын

Bass fishing 🤣🤣 i hear it

@sealions__9286

3 жыл бұрын

@@williamdelozier4064 I think it is in farming sim😂

@matthewmcclain1316

3 жыл бұрын

Freakin heck, you just brought back some good memories

@ryan4christ

3 жыл бұрын

William Delozier that too!

Did I miss a part where they explained how drilling hundreds of holes without some sort of sealant isn't going to compromise the waterproofness of the hull?

@Onhaey

3 жыл бұрын

How about the part where cleet had to pound his chest and show everyone who’s boss and made the last cut with the circ saw and way over cut it 😂

@michaelglass8546

3 жыл бұрын

Good thing they have a full time fabricator on the payroll now ha

@TTSFabrication

3 жыл бұрын

Wondering the same thing

@lostman9814

3 жыл бұрын

Stainless will eventually eat the aluminum thru galvanic corrosion. It can be slowed if they used blue Loctite and it will also help with any potential leaking adding sealant on the inside would be good both for avoiding injury and sealing.

@truckguy6.7

3 жыл бұрын

@@lostman9814 They most likely will be thrashed a long time before that.

Absolutely love the dynamic you 3 got going on here. Man this is gonna be a badass year of content!

Seriously man, you're never allowed to hang out with Whistlin Diesel again, ever.

“Oh, this is a thing of some sort” -James Taal 2021 🤣

@tjcmoto5484

3 жыл бұрын

Time stamp?

@TheMashedFM

3 жыл бұрын

@@tjcmoto5484 18:38

@TayebMC

3 жыл бұрын

@@TheMashedFM 13:45 Timetravel

@TheMashedFM

3 жыл бұрын

@@TayebMC huh?

stoked to see a jetboat update keep em coming!!! thank you!!

James: It's diamond plate 😂😂💎

Who else started sweating profusely when cleetus picked up the circular saw

@RyanGribble

3 жыл бұрын

Knowing his penchant for cutting himself with razor blades i did get a bit nervous.

@jasonaldenhaley1

3 жыл бұрын

Definitely CANNOT borrow mine. Switch kept cutting on/off, on/off...fab'd in a normally open momentary push button switch. NOW, I'll say..."grab the widow maker" wife & 3 kids all know i need the circular saw...also NOW, SUPER FAAAQ'N EXTRA MEGA DANGEROUS!!! Signed - Lefty

@maxeriousbrooks9807

3 жыл бұрын

And he failed the cut lol like 5/8 to deep on one side after he talked it up like he was gonna show him how it was done

@RyanGribble

3 жыл бұрын

@@maxeriousbrooks9807 it doesn't really matter how deep. It's just there to protect the hull

@maxeriousbrooks9807

3 жыл бұрын

@@RyanGribble I know thats why they didn't mention it but still a sloppy cut regardless I wouldn't of even mentioned it if he hadn't said he was gonna show him how it was done

Should wrap the front of the boat with an American eagle. Have the beak of the eagle the tip of the boat and the sides of the boat in the front the two wings spread and name it the screaming eagle

@matthewmcclain1316

3 жыл бұрын

You explained that well. I got a perfect picture in my head and I like it!

@mitchellmccoy5730

3 жыл бұрын

My Uncle Ron sure would approve, but I don't think those Jet-ski motors are Two Strokes

Thanks for the jet boat update cleetus

That personal injury ad right on que at the beginning of the video 😂

Next on the Cooper Boggettti Chanel "I'm building a 2JZ boat"

@pieceofchevy9123

3 жыл бұрын

Where has coop been lately?

@LacquerSniffer

3 жыл бұрын

@@pieceofchevy9123 Hes got jealous and made his own channel

@AndrewPureMI

3 жыл бұрын

Yes yes ye

Tech Deck is still around? Shit, I remember when those came out like 20 years ago. James knows his cool toys!

@jake3736

3 жыл бұрын

They come back in every few years

@brucebaseball437

3 жыл бұрын

I know right?! My 11 year old son randomly asked for them for Christmas back in November. I was like what? Ok

@Mr240lover

3 жыл бұрын

They are currently at Wal-Mart

Loved how you held up your pinkie for extra safety :D

RXP-X and RXT-X are bad ass skis. Absolute rippers in sport mode

Nothing like a divorce to get a bargain deal.

@michaellecompte1889

3 жыл бұрын

The 3 D’s to the Deal. 1. Death 2. Disaster 3. Divorce

@joseacuna3239

3 жыл бұрын

Yeah, I don’t wish bad to anyone but my neighbor has a tig welder of a very nice brand and every time I hear them fighting I pay close attention the next day for a “for sale” sign 👀 suddenly showing up!

@dougtond1380

3 жыл бұрын

@@joseacuna3239 that's fucked up

@bradbutcher3984

3 жыл бұрын

@@joseacuna3239 yeah I married a Latina (Mexican) and she wasn't a good person like yourself either. Shady folks...

@trombonist135

3 жыл бұрын

@@dougtond1380 eh, I see it as more opportunistic lol. It's not his relationship 🤷‍♀️

I’m surprise there is it some kind of Apoxsee or silicone used. I definitely get all the screws though, imagine a quarter of that plastic flapping out and grabbing water at highspeeds… No bead of silicone or anything around the edges? Thanks for the videos, cheers! So sweet!

@AH-lw2bj

3 жыл бұрын

Epoxy

Pull the black rubber accordion hose back near the carbon seal and pop off the C clip. Unbolt the pump at the rear and remove it with the drive shaft. It needs to come out anyways and it will make it much easier!

Nothing beats that good ol cleeter montage music

The mention of tech decks was pretty nostalgic

@joseacuna3239

3 жыл бұрын

Right in the feelings

Ultimate test for these should be ripping through Haulover Inlet.

@eriklarson9137

3 жыл бұрын

Yes please.

@insanereindeer4081

3 жыл бұрын

That's a good way to get the crap beat out of you.

@dilligafdude9434

3 жыл бұрын

@@insanereindeer4081 but would he be a true Florida man if he didn't do it? Think of the news headlines: "Local giraffe attempts Haulover Inlet during high tide in 12 foot boat."

Next time when drilling and tapping UHMW Use parafin candle wax on the drill and tap combo. For the 82* counter sink, use a 6 flute cutter. Much less wear and tear on you and the tooling.

You guys should collaborate with JP Racing. Julio is a champ. He builds and tunes seafood all day.

@JP_RACING_INC

3 жыл бұрын

Seafood power!!!

@damonhoward3955

3 жыл бұрын

Haha! I guess I should have proof read that!

When you can’t even buy a jetski and Cleetus goes out and get two brand new one for a killer deal then immediately tears them apart nice love it 😂👍🏽👍🏽 also I don’t comment very often keep up the good work Cleetus

Then there’s me buying a $200 jet ski that barely runs and a beat up jon boat without a title.

@somefella6881

3 жыл бұрын

Lol i hear ya man. This is a rich man build here.

@matthewmcclain1316

3 жыл бұрын

I wouldn't wanna see the cost of these boats completed. Materials and man hours aren't cheap.

@jaydak99

3 жыл бұрын

@@matthewmcclain1316 $35K, each.

@firefly2472

3 жыл бұрын

@@jaydak99 at least

@AsinineAlec

3 жыл бұрын

Lol I have a title-less Jon boat in my garage too 😂

The jet boat market is developing so fast. 4 years ago you had to make everything short of the basic hull kit yourself. Your kits are so inclusive. Little brackets and all that stuff takes a lot of time to figure out when you want it nice.

I knew those cut lines looked too precise for you guys. Nice work Ty!

You probably should have added a DO NOT TRY THIS AT HOME In the beginning

@hirochavez99

3 жыл бұрын

Too late for that now

@Mr.SisterFisster

3 жыл бұрын

Pretty much implied for each video at this point, lol.

@babylondrifter5612

3 жыл бұрын

i would try it looked fun

@SpuddyLlama

3 жыл бұрын

Too late indeed

If WhistlinDiesel is hibernating, somebody gotta start wreckin sh!t.

@carscarsandmorecars3266

3 жыл бұрын

He bought like 6 new trucks and cars he wont be gone for much longer

@christiancampbell-sanderso5998

3 жыл бұрын

He must be planning his budget since he only got 3 videos from the jeep 😁

@360nastybusiness

3 жыл бұрын

Hate people that wreck stuff pointlessly. Whistling diesel is a massive idiot

@dejabeug7042

3 жыл бұрын

@@360nastybusiness hahaha someones sour

@josteincarlsen2905

3 жыл бұрын

Nasty business. Yeah right...😂🤣🤣🤣 It’s not your stuff so why are you mad

So glad you guys have a skilled fabricator on hand .

Nice work on the boats, the only thing that would’ve made it better. Drill all of the holes, take it apart and debut it as it’s a need to be waterproof. The black seal the screws as you install them. You might have to do that after you put them in the water and find that they leak. Good Luck. I am an aero engineer. Keep Smiling. Cliff Q.

Imagine how cool one of these little boats would be with a rotary.

@tombstonejones9581

3 жыл бұрын

Angel Motorsports rotary!

@calebb5106

3 жыл бұрын

*Rob Dahm has entered the chat*

@markthegunplumber8376

3 жыл бұрын

with boats and planes "dependability" is king. better stick to pistons.

@joshg8458

3 жыл бұрын

Boosted boise still needs to build one!

Put real bilge pumps in those boats, don't keep the ones from the jet ski

You can tell cleeter does his research about his projects. He definitely learns alot as he goes but he puts in time to gain alot of knowledge on a project before starting.

Perfect music for the time lapse 👏🏻

I saw them in the background of the cleetus 2 video, I knew it was coming

Man I wouldn't put my hand there. Cleeter: " you don't think?" Proceeds to to start sawing. Lol

Cant wait to see y’all rippin down the peace river would be sick to see you guys race around

Best timelapse music on all of KZread! Good choice Cleeter!

I hope you used a teflon gel on those hull taped bolts or in a year you'll be drilling them out😂

James' wrap is gonna be all black like the rest of his vehicles (other than white buffalo) and ol Cleeter is gonna do a Dale wrap on pike

Yay we’re finally done!!!!! Realizes there a whole second boat to do!!! Frickkk!!!

Cleeter, You definitely need to look for some space out front to build an Aussie Style Jet Boat course, loving our work my friend, Mick and Jackstand Jackie x

Ok let’s be real who wants to see an LS swap in one them jetskis

@martinmiller7623

3 жыл бұрын

Check out Jet ski bros.

@driojal

3 жыл бұрын

Actually turbo Hayabusa will be sick on them. High RPM they will be fast as hell

Always comment to make sure it makes the "suggested" side of youtube. If you don't watch this channel, you're in for a treat!

From dealing with poly on airboats, working in the sun makes the uhmw softer and more flexible.

Every time he put the timelaspe music I have image of driving of race week in my head :D

We had a chunk of that skid plate fold back on our air boat, caught a boulder, and launched everyone overboard... Bonus was we got off work early...

@kameljoe21

3 жыл бұрын

Yeah I keep thinking they should be angled and much higher up.

@Dave7heRave

3 жыл бұрын

holy shit hahaha would of thought it would snap with the force and weight of the boat with occupants before flipping

James: *opens box* “Oh this is a thing of some sort!”

Those are coming together nicely I water skiid off a 7ft Mini Boston Waler as a kid It had a 55hp Merc outboard was good for about 40 on the water and could turn on a turtles back You guys are in for a treat Wake-board the Colorado Cleet !

Loving the boat builds

Cleetus: "Some of this stuff is gonna be hard to decipher." James: "Uh this is a thing of some sort" James got me dyin' over here

JP racing Inc. Ft Myers stage 3 kit for that jet ski motor. If you want 70+

Love the jet boat builds.....don’t wait too long to finish them

Been waiting for the jet boat builds!!

I love always wanted one of the jet stream boats , but by gawd that’s a lot of work

Have a stripper pole installed in James boat when he isn't at the shop LOL

@AdmissionGaming

3 жыл бұрын

I just snorted out all my cocaine everywhere

@Jake_Hamlin

3 жыл бұрын

Ski pole for ski/wakeboards, 300hp should be fine

@mikescherrer4923

3 жыл бұрын

@@AdmissionGaming I hate it when that happens.

Finally. Been waiting for ever to get back to the boat builds. Can’t wait for more. Gonna be cool as hell.

I love that timelapse music Cleet uses. its now synonymous with his videos, hope he doesnt stop using it

Intro: another episode of how Cletus gets hurt.

James is always the one that’s like “yeah I’m not too sure what to do here” and in 3 and a half hours there’s nothing but shell left with a nitrous kit on the table 😂

I worked on boats and jet ski's for years and the best one I came across was a honda jetski with a turbo'd vtec in it. That thing was one BA unit boyz.

Super excited about this project, keep it going!