Dude, your demonstration of this tool is by far the best out of anyone.

@tompas11A3n52KkX

Жыл бұрын

Oh thank you very much!

Thank you for experimenting and showing us how to make our own coils!

@tompas11A3n52KkX

3 жыл бұрын

Thanks for watching my experimenting with this induction heater.

Welcome back. Good to see you again.

@tompas11A3n52KkX

4 жыл бұрын

Thanks Dale! As always nice to be back!

I like this heater. Great presentation too. Thanks!

@tompas11A3n52KkX

4 жыл бұрын

Yeah it's great to have when you own a car that's 32 years old like mine. Thanks a lot.

Thank you for sharing. I’m looking at getting one of these, and likely will because of this video

@tompas11A3n52KkX

2 жыл бұрын

I hope you will be satisfied with the induction heater if you buy one. Thanks for watching.

Good, thoughtful demonstration!

@tompas11A3n52KkX

3 жыл бұрын

Thank you! Much appreciated. You seems to have an interesting channel. I will look into your channel later. Once again thanks.

This is a great video, you have given me the feeling to buy this tool

@tompas11A3n52KkX

3 жыл бұрын

Thank you very much. Yes this induction heater is really good in what it's doing and I don't think that you will be disappointed. if you buy one.

Wonderful demonstration. Picked one of the many clones up from Amazon. I have a car full of rust that I need to work on and want to minimize wrench-throwing events 😀

@tompas11A3n52KkX

Жыл бұрын

Thank you very much!

Brilliant demonstration, I have one on order, subscribed.

@tompas11A3n52KkX

8 ай бұрын

Thank you very much. Really appreciated your subscription. 🙂

Excellent demonstration.Looks an awesome tool 👍

@tompas11A3n52KkX

Жыл бұрын

Thank you!

what a cool tool! thanks for the presentation. a hug and stay safe.

@tompas11A3n52KkX

4 жыл бұрын

Yes it's really cool. I have made some more coils, good to have when you need them. Thanks a lot.

@slickrick343

Жыл бұрын

@@tompas11A3n52KkX how have you found this tool 2 years down the line? Still working?

@tompas11A3n52KkX

Жыл бұрын

@@slickrick343 Yes it's still working.

I have just purchased this very same tool from a different vendor, only it's a 115 volt unit, (more usable in many more places in my opinion), This tool works very well, it' absolutely great and a super addition to my tool array. Instead of having to break out the torches in a lot of cases I just have to run a power cable to the job and saves a LOT of time and effort. You can heat up just the fastener you need to without the overspill from a flame unit.

@tompas11A3n52KkX

3 жыл бұрын

I agree it's a great tool.

@buckshot8393

2 жыл бұрын

Can you please give me information where to purchase the 110 volt unit

@meTimetraveler

Жыл бұрын

i bought the same unit 115v , works great

@tobygathergood4990

Жыл бұрын

@@buckshot8393 Either eBay or Amazon carries them.

@BOREDANDWELLBORED

Жыл бұрын

@@meTimetraveler does it automatically shut off every 2 minutes? I red you can only use it 2 minutes maximum at a time.

Definitely like the video. Just ordered me one. May have to make me a few specialty coils. Out of some wire I have a few spools of bare copper I’ll have to take a few feet from an make some for odds and ends ends the out the box coils aren’t able to do

@tompas11A3n52KkX

8 ай бұрын

Thanks.

Same unit I have, works like a champ!

@tompas11A3n52KkX

Жыл бұрын

Yes it works really good.

I was just about to spend an extra $100 on a coil kit for the induction heater I just bought but thanks to your video I know how to make my own for much less! Thanks for sharing this!

@tompas11A3n52KkX

3 жыл бұрын

Nice that my video was helpful fot you and saved you some money too. Thanks for watching.

@jeeprenegade1985

Жыл бұрын

I just use a blow torch

@tompas11A3n52KkX

Жыл бұрын

@@jeeprenegade1985 That's another way.

Great video, I just ordered mine

@tompas11A3n52KkX

Жыл бұрын

Thanks. Hope you will be satisfied with yours as I am with mine.

trevligt verktyg, tack för visningen.

@tompas11A3n52KkX

4 жыл бұрын

Ja detta verktyg funkar faktiskt väldigt bra och det kan ju praktiskt att slippa värma med öppen låga och vad detta kan medföra om man har otur.

Great (practical) video review! Thanks for taking time to share this. What is the length of the free form wire (that you can make your coils with but provided by the manufacturer?). I ask because even if this is a self tuning circuit, it will have limits to the inductive load it can handle.

@tompas11A3n52KkX

Жыл бұрын

Please wait a minute, I'll go down to the basement and check. Ok back from the basement. The length is about 770 millimeters or roughly 31 inches. Hope that answers your question. Have a great day and thanks for watching.

Just purchased this same kit, great for bolts close to hoses brake lines and rubber bushings where fire is bad. I just find the button cheap. And cuts out with the slightest movement. But other then that i got out really rusty bolts out very easily. I compared without heat. Wouldn’t budge with my impact, then applied 20secs of heat and BAM! no struggles 🤣 Amazon rocks.

@tompas11A3n52KkX

2 жыл бұрын

Good for you.

@dubmob151

2 жыл бұрын

@@tompas11A3n52KkX in the US that's normally a sarcastic comment 🙃

@tompas11A3n52KkX

2 жыл бұрын

@@dubmob151 Oh I didn't know that. My comment wasn't meant to be sarcastic. I apologize if's perceived as such.

@dubmob151

2 жыл бұрын

I knew it wasn't meant to be, it's just a figure of speech that was used sometimes, in response to someone bragging about something, to indicate you're not all that impressed. Or it can be complimentary, if delivered by a nice person. "you passed your exams- good for you!" Or said with a haughty sniff, as to say, whoop dee doo, that's no big deal, 😉

Many thanks. I was going to buy one for use on marine stainless steel which is non magnetic. Saved me from wasting my money. Thanks again!

@tompas11A3n52KkX

3 жыл бұрын

You are welcome!

You sound like a Scandinavian 😉 thank you for this movie.

@tompas11A3n52KkX

3 жыл бұрын

That's right, I'm Swedish. Glad you liked it. By the way you sounds lika a Dutchman ;-)

Great demo

@tompas11A3n52KkX

2 жыл бұрын

Thank you!

I wonder if this could be used to heat treat spur gears? Very cool gadget!

@tompas11A3n52KkX

4 жыл бұрын

For smaller spur gears probably.

Excellent review

@tompas11A3n52KkX

3 жыл бұрын

Thousand thanks!

Bardzo pomocny film

@tompas11A3n52KkX

Жыл бұрын

Thank you.

Tackar för en bra video :) Är det ett fäste till främre röret på en 240 som lossar skruvarna på? Hur stora skruvar/muttrar fungerar den till ?

@tompas11A3n52KkX

3 жыл бұрын

Tack Johan. Ja du har helt rätt det är fästet till främre röret på en 240. En bekant skulle lossa centrumskruven som håller drivaxeln i navet på en Skoda. Den satt så hårt att han drog sönder sitt ledhandtag som han förlängt med ett rör. Jag for dit med mitt ledhandtag och induktionsvärmaren. Nyckelvidden på skruven var 24 mm. Det krävdes två värmningar sedan gick det att lossa skruven på både vänster och höger sida. Det var den grövsta skruven jag värmt hittills och det gick ju bra. Den här induktionsvärmaren är inte att jämföra med en vattenkyld trefasvärmare, som jag jobbat med tidigare. Men den är ändå bra att ha till hands där värmning med gassvets inte är lämpligt.

@allt-under-solen

3 жыл бұрын

@@tompas11A3n52KkX Tackar för snabbt svar :) Låter som den är good enough åt en hemmapulare som gärna slipper en massa extra arbete som en avdragen skruv kan innebära :)

Thank You

@tompas11A3n52KkX

Жыл бұрын

You are welcome.

What would be the maximum size of nut this tool could reliably heat up? I have an M18 nut thats seized up pretty good, but im worried this might not have enough power.

@tompas11A3n52KkX

7 ай бұрын

Well M18 spanner width is 27mm. Depending on how much rust there is, you may have to heat several times.

do you happen to have a link for the tape you have used ? also how is the long term durability ? thank you

@tompas11A3n52KkX

2 жыл бұрын

I'm sorry I have no link to that tape. Long term durability, so far good.

Since this review is 2+ years old, how has the heater held up, any issues with it? Thanks for the info.

@tompas11A3n52KkX

Жыл бұрын

No issues at all, still works as it should. I'm pleasantly surprised.

Hi i bought this same heater from from other seller.. when i was heatin a nut it turn off it self And cant tuen it back on any idea ??

@tompas11A3n52KkX

2 жыл бұрын

Sorry to hear that. Probably an electronic component or the on switch that broke. If you had been my neighbor, maybe I could have fixed it for you.

They sell fiberglass sleeving in tubes on amazon. Looks like you are using 14 ga wire, 12 ga is thicker which might match the original

@tompas11A3n52KkX

3 жыл бұрын

I'm using 2mm (12 ga) my homemade ones. The heater came with 2,5mm (10 ga) but I didn' have that on hand.

Tom after this we will take up collection for you a set of gearwrench ratchet wrenches.

@tompas11A3n52KkX

3 жыл бұрын

Oh thank you Virg that would come in handy. I don't have that type of tools but I get your point. Thanks for watching.

16:29 Shouldn't the coil be bigger so there is a gap between the coil and the item you want to hear? It just seems like A) it could short, and B) heating the coil unnecessarily will lead to the coils being worn quickly.

@tompas11A3n52KkX

2 жыл бұрын

Yes and as I said in the video that was a little bit too tight. A 5mm gap all around is recommended.

@dubmob151

2 жыл бұрын

I wonder if it might be good to have some Pyrex or ceramic cylinder to wrap the coil around for protection of the coil against damage, like the welding cups used in Tig torches. Then there's no abrasion or possibility of burning the insulation and causing a short in the coil.

@tompas11A3n52KkX

2 жыл бұрын

@@dubmob151 Yes that's a good tip if you can find the suitable diameter for the job.

@richardrichard5409

6 ай бұрын

The unit works by eddy currents, not sound😂

The heater and the price is very attractive but the coils are super cheaply made. Is there any way I could purchase replacement coils from one of the Bolt Buster or Mini-Ductor and use those in the chinese induction heater? Or is size and fitment going to be an issue?

@tompas11A3n52KkX

3 жыл бұрын

Max wire diameter for the coils is 6 mm.

what type of gauge wire u use with the tape around it

@tompas11A3n52KkX

2 жыл бұрын

2mm copper wire.

Var kan man köpa tejpen som du använde när du gjorde egna spolar?

@tompas11A3n52KkX

3 жыл бұрын

Ja du Henrik om jag det visste. Jag fick tapen av en kund som jobbade på Metallverken i Västerås och detta var minst 25 år sedan. Det närmaste man kan komma är kanske kaptontape, som tål runt 250 grader. Men den tapen som jag fick och har är inte kaptontape utan någon annan sort.

Does it work for copper tubings?

@tompas11A3n52KkX

5 ай бұрын

No only magnetic metal such as iron.

Hi mate iam from Indonesia is that possible if coil can be used for brazzing induction copper. I wanna Buy the machine for repair HVAC copper.

@tompas11A3n52KkX

2 жыл бұрын

Don't know haven't tried that.

the link to the product indicates it has been discontinued. Just wondering if perhaps there might have been some quality issues with the product.

@tompas11A3n52KkX

Жыл бұрын

Well I can tell you that mine still works.

That’s great,, do you think this tool can melting the silver and gold ?

@tompas11A3n52KkX

3 жыл бұрын

Thanks. No only magnetic material.

@Faisal1979nasser

3 жыл бұрын

@@tompas11A3n52KkX ok if i put the silver in Side steel ?

@tompas11A3n52KkX

3 жыл бұрын

@@Faisal1979nasser I think you need more power than this can deliver to melt silver in a steel container.

@Faisal1979nasser

3 жыл бұрын

@@tompas11A3n52KkX thank you so much 😊

@carlosmejia5728

2 жыл бұрын

Watch this kzread.info/dash/bejne/lpypl5SQnNWXd8Y.html Or look up "how to melt silver and gold at home"

I wonder if this can be used for brazing copper tubing?

@tompas11A3n52KkX

3 жыл бұрын

No. An induction heater can only warm up magnetic material.

@thisisyourcaptainspeaking2259

3 жыл бұрын

@@tompas11A3n52KkX Yes, good advice! I have seen similar tools being used for brazing copper, there must be some aspect I'm not comprehending.

@porqpine5

2 жыл бұрын

@@tompas11A3n52KkX You can with non-ferrous metals, it just takes a chunk more power, IE: "The following summarizes conversion efficiencies for common base metals heated with induction heating: • Pure iron 95-98% • Medium carbon steel 85-90% • 316 stainless steel 45-50% • Aluminum 35-40% • Copper 5-15%." So you might need a ~5-10kw unit to have similar results with copper. If you look it up, it's how a lot of industrial processes are done (IE: welding tubes for HVAC applications/manufacturing).

@tompas11A3n52KkX

2 жыл бұрын

@@porqpine5 OK but this item only puts out 1kW.

@porqpine5

2 жыл бұрын

@@tompas11A3n52KkX Yeah, I suspect you'd really struggle to braze copper with this one. It'd be nice if you could of course, I know a few refrigeration repair techs who would love it.

Shouldn't the coil touch the object it is heating? I think if it touches it its insulation should burn or scratched. If so, it would be difficult to hold the coil steady for a few minutes until it heats up. Thank you.

@tompas11A3n52KkX

3 жыл бұрын

The coil must not touch the object to be heated. A gap of 5mm is adequate.

@seung-hojoo7705

3 жыл бұрын

@@tompas11A3n52KkX Thank you. That's very helpful.

@tompas11A3n52KkX

3 жыл бұрын

@@seung-hojoo7705 You are welcome.

I have got to have one of these! How have I lived for 62 years and never seen this before?

@tompas11A3n52KkX

3 жыл бұрын

Buy one and loosen any rusty nuts and bolts you see and be happy the rest of your life.

although it can't directly heat aluminum, copper, lead, couldn't you heat an iron or steel crucible with those metals inside?

@tompas11A3n52KkX

3 жыл бұрын

You can heat those metals inside an iron crucible to a certain temperature but you can't melt them except lead.

I want this model induction

@tompas11A3n52KkX

4 ай бұрын

So why don't you buy one...

Can it melt steel?

@tompas11A3n52KkX

2 жыл бұрын

No only heat up metal until it glows.

Hello Tompas11 where did you buy that tools? I want one.

@tompas11A3n52KkX

9 ай бұрын

From Banggood but now it's broken. I will try to repair this induction heater.

@nestordupo845

9 ай бұрын

@@tompas11A3n52KkX thats not a good quality though and its so expensive. In wish it cost about 2700sek.

Är du nöjd med den här induktion?

@tompas11A3n52KkX

2 жыл бұрын

Ja hittills har den fungerat helt ok.

your not supposed to contact metal direct because the heat will burn through the insulation and short it out.

@tompas11A3n52KkX

Жыл бұрын

Yes, you are absolutely right.

is it still holding up ?

@tompas11A3n52KkX

Жыл бұрын

Yes it sure is.

How much did you pay? The link says sold out

@tompas11A3n52KkX

Жыл бұрын

I got it for free.

Great tool, but the price is pretty steep. I'd expect better quality insulation. IDK the cost breakdown on these heaters, but they aren't that hard to build. One of the downsides is getting something like that into tight spaces vs wire brush and sprays. Can't say I've had enough rusty bolts to justify the price.

@tompas11A3n52KkX

3 жыл бұрын

If you bend the coil you can get into pretty tight spaces but of course there is always a limit. Banggood price: 3800SEK. If I buy exactly the same tool here in Sweden the price is: 6000SEK.

@karljay7473

3 жыл бұрын

@@tompas11A3n52KkX This guy built one that's 40% more powerful for about < $50. There's a link in his description. kzread.info/dash/bejne/i4OTxbuhhpnLebA.html&ab_channel=Schematix. I'm thinking about building it, but I wanted a more powerful one for melting things.

@tompas11A3n52KkX

3 жыл бұрын

@@karljay7473 Yeah I have seen that build. It's more powerfull but a little to big for heating up bolts and nuts in tight spaces I think. Don't you agree?

@karljay7473

3 жыл бұрын

@@tompas11A3n52KkX Yes, it's bulky, but you could maybe scale it down, IDK electronics enough to know how to scale it down, but you could and save a lot of money. If it's $50 for that setup, then maybe 30~40 for a smaller one. The main point is that the ready made one is $250, this is $50, so you save a ton of money.

@phendlin

3 жыл бұрын

it only takes one broken bolt to justify the cost.

If you say 'Easy Peasy'...you have to say 'Lemon squeezey!' as well,,,,it's the law. :-)

@tompas11A3n52KkX

Жыл бұрын

OK I will do that the next time.😀

candle wax applied makes it better

@tompas11A3n52KkX

2 жыл бұрын

In what way?

@berniemac8413

Жыл бұрын

@@tompas11A3n52KkX wax is used for lubrication of the threads.

@tompas11A3n52KkX

Жыл бұрын

@@berniemac8413 Yes, but I think oil is better to use.

This review is just what I’ve been looking for. The machine looks like all of the cheap models for sale on eBay for £160-180 I need to remove 7 steel exhaust bolts from an aluminium motorcycle head, I’m thinking it’s worth paying for if that’s all I do with it...as long as it lasts that long!! (Cheap Chinese Crap) I would think as long as you watch the insulation and replace before the coils touch,or a a part of the uninsulated coil touches the workpiece it ‘should’ be ok. I’ve been wondering how long it would last before breaking, is it still ok, have you used it a lot?

@tompas11A3n52KkX

3 жыл бұрын

Thanks. Mine is still working ok and I have been using it many times helping friends removing bolts. As you mention, it is important to keep an eye on the insulation of the coils.

@66Pipes66

3 жыл бұрын

Thank you for replying ,I really have been scared to buy one 👍😎

@66Pipes66

Жыл бұрын

I meant to reply to my own question. I found it was rubbish for my needs and promptly sold it.

Mine died in three or four heating cycles. Not good.

@tompas11A3n52KkX

11 ай бұрын

No that's not good. Mine is still working. If you know something about electronics maybe you can fix it.

Det verkar ha blivit något fel på adressen till värmaren, den andra funkar.

@tecnobs3d

4 жыл бұрын

Båda länkarna fungerar.

Thank you for your share test video of 1000W Induction Heater, if have want cooperate with us about this product, please contact me, because I am the only manufacturer in China

@tompas11A3n52KkX

3 жыл бұрын

Thank you. What do you have to offer me?

@adamcheungduropower6678

3 жыл бұрын

​@@tompas11A3n52KkX I can provide best wholesale price with you if you have idea that sell this product in your country. Becuase we looking for some customers who have already used our products, instead of these trader in ebady, Amazonas... Can I contact by email?

@dubmob151

2 жыл бұрын

In all of China?

WHERE'S THE LIQUID WRENCH?

@tompas11A3n52KkX

9 ай бұрын

No need for the liquid wrench when you got the induction heater as your best friend.

I bought it from amazon for almost $ 200. I am trying to loosen up a cam shaft gear bolt . I am trying to use it , hopefully tomorrow, 1/ 16 / 23 . The way the user manual talks it says I almost need to be naked to use it safely, i have had my shoulder & knee replaced . It is saying they might come out .🤣 , Oh My , is it MRI? They say made in USA 🤣 but on the box it says made in china 😂 They call it : HOT ROD . The book scares the daylights out of the buyers . What the duck 😛

@tompas11A3n52KkX

Жыл бұрын

Just take it easy. 😉

Just dip the coil in plaster . no need to buy new.

@tompas11A3n52KkX

9 ай бұрын

Good idea!

@patrickheffernan8658

7 ай бұрын

Brilliant

@chemcorps272

4 ай бұрын

Oh... Im gonna give this a try. Thank you!

I'm sorry why wouldn't you buy American made or at least something you can get locally for that price I click the link and it's like $300 I'm like what the whole point of the video is that it's on banggood which is supposedly cheap

@tompas11A3n52KkX

3 жыл бұрын

I can buy exactly the same made in China product in Sweden for 3500-4000SEK. I got this one for free. So why not make a review of it? It's up to the viewer to buy it or not. I'm not forcing anyone.

@bushratbeachbum

Жыл бұрын

Not everyone is in America. There's a whole big world out there. The rest of us appreciate the review very much.

use smaller coil

@tompas11A3n52KkX

3 жыл бұрын

Yes but not to small. You need about 5mm free space all around the object you need to heat up.

Samma verkar finnas på Aliexpress för 1700:-. Man blir onekligen lite sugen...

@tompas11A3n52KkX

3 жыл бұрын

Ja denna är faktiskt rätt händig att ha till hands vid vissa situationer. 1700 spänn är ju ett kanonpris. Håller du på med bilar eller liknande där det mesta kan vara fastrostat så... Vad väntar du på?

@peterhogberg7287

Жыл бұрын

@@tompas11A3n52KkX jag köpte på aliexpress för ca 2,5 år sedan , efter 1 år och endast 5 jobb gick den sönder, skrev till säljaren och han skickade en ny utan att jag behövde returna den trasiga, nu har även denna gått sönder , efter endast ca 5 jobb. jag hoppas det är nåt litet fel som hänt, det har inte luktat bränt utan bara stannat.

@tompas11A3n52KkX

Жыл бұрын

@@peterhogberg7287 Tråkigt med prylar som inte håller. Har du skruvat isär den för att se om det är dåliga lödningar eller liknande?

@peterhogberg7287

Жыл бұрын

@@tompas11A3n52KkX jag ska göra det imorgon

@tompas11A3n52KkX

Жыл бұрын

@@peterhogberg7287 Skriv gärna om du upptäcker några fel.

i hope you arnt breathing in galvanized steam brotha

@tompas11A3n52KkX

Ай бұрын

No that's bad to your health.

Fuck Etoro reclams...!!

@tompas11A3n52KkX

Жыл бұрын

Nah I don't think that.