Thank you for everything. I sincerely think this is a quite good low cost mini oscilloscope. Rember to use the links if you want one. Also check the extra links of my webpage www.electronoobs.com/eng_gadgets_gad1.php

@TheJaime575

5 жыл бұрын

Does it work good for car audio to set gains?

@JAKOB1977

9 ай бұрын

Come on, this is a pain, and is the last unit any beginner should get as their first scope. gotta wonder how you can even conclude that. Have yo actually purchasedc this yourself, or did some Chinese vendor greased you with one, in exchange that you pushed it onto your viewers. where are you from with such a backbone? LOL.. you stats claim you in the USA...sure buddy, ofcourse you are. Are you form Russia? since you tend to do to these rancid extremes, or is it simply how you are wired.. dishonest as f..hopefully such behavior will land you a curveball down the line from life. Any newcommer should not get such a pocketsize scope, its cumbersome to work with.. get one that is easy to manage and dial in settings...and a decent size screen so you can see what is unfolding. a pocket size scope like these DS211/212/213 etc, is intended as secondary units and they are heavy to work with, if its intended as your only scope as a newcommer..

Hey, thanks for great tutorial video. I've had this device sitting in the pocket of my backpack for 3 years and never actually used with it because I never found the time to really figure out how to use it. (And the docs came on mini DVD ... I have 0 DVD players in my several computers.) Your video finally got me up and working. THANKS!

This was helpful. I didnt understand much of the menu navigation on my DS203. It was a frustration. You should do more on this.

Thanks for the review, I've actually been looking at these for a few years but never could decide if it was worth it or to spend a little more for a usb style one used with a laptop.

thank you for the great video. Have been wanting to get either the aeswave or this one. Have been leaning towards this one. Your awesome video confirmed it for me. Much better than aeswave's offering.

@Spelter

4 жыл бұрын

The aeswave is not that good too I think, it's still a SoC solution. For cars, this is enough and it's small enough for my toolbox. A cover and a few probes are enough. And there is s mcx to BNC adapter for small money, so these special connectors and probes are more for the home. Getting the coil signal with an amp clamp does not work for these small devices, look into dso controllers like Hantek you can use with a mobile phone or tablet.

I have seen this oscilloscope, but I bought dso150. in my first test from 100 Khz the signal is very terrible... I'm going to buy dso203 someday.. .it was so nice revieww!!

Dude that oscilloscope is awesome

Grate video, thanks!

Great review 👍

A very capable improved software is available called Wildcat. It does all that the default software does, plus fft, map display, serial signal sniffing and other things. Bandwidth is respectable. There are two versions depending on your hardware. The users manual for Wildcat is all prose and no pictures but is clear and usable. Wildcat can be the default software, or it can be alternative software so that you choose which software you want to boot with.

@marcmathes41

5 жыл бұрын

i will try it do you have link? and this runs on updated firmware?

@challchull3000

5 жыл бұрын

do you have any link ?

@beakytwitch7905

5 жыл бұрын

@@challchull3000 Google finds it...

Nice review. I would find it difficult to work with this thing since its so small, hard to operate buttons, and doesn't have any sort of a stand. Also, I find that Banggood prices are way more than AliExpress. Do you have any reviews on the 100MHz Hantek DSO5102P? I am sure this small scope is good for many, just not for me.

@rogersy7209

6 жыл бұрын

Ifyour planning to use iDSO5102P in automotive disgnose. It was not compatible with Hantek HT-25 Capacitive probe for Secondary Ignition Voltage... Display looks like distorted sinewave....... No problem display of Primary Ignition voltage using standard X10 Test probe.

Fantastic product! For anyone who is starting... It's perfect. :)

@JAKOB1977

9 ай бұрын

its the worst scope you could get as a newcommer and having to deal with such a cumbersome interface and small screen..are you trying to convince yourself?

tutorial on dso 188 please .. I'll be using it to set amp gains to make sure not clipping

Presumably, I can use this to monitor a music synthesizer's audio waveform shape from the synth's audio output?

Simply (lol) Amazing! Thx!

Thanks for sharing :-)

Great Video! thanks. I need to downsize to digital and this video made the decision easy

i'm new to oscilloscopes, i was wondering what all the sorted words stand for?

Is this oscilloscope or the ds213 sufficient for an electronics noob experimenting with sensors and MCUs?

Make a video that how this device is used for sound frequency music sounds with hz unit

Did you replace hantek with keysight

link is broken.. do u think this can do engine ignition waveforms with the correct adapters from pico or similar?

Can we used this to measure 230v ac ...and what is the maximum voltage and current this probe can handle.?

You are very professional i'm your fan .

Will this oscilloscope measure mains voltages?

How much is that keysight?

nice video

Wow - I looked for Wildcat 5.6 firmware, and there is no longer any working link to download the hex file. I have already got Wildcat on my HW 2.72 DSO quad, been on it for several years and it is amazing firmware that takes this scope several steps beyond. Github has the source code and you can compile this yourself.

It's easy to set up

Wow

Hi, can I use it to display mains 220v AC waveform? I need to check if DC/AC inverter generates pure or modified sinewave. thanks.

@aviralpatel2443

4 жыл бұрын

yes you can, it comes with a x10 probe

@MarkusLutz1504

4 жыл бұрын

@@aviralpatel2443 Hi, sure, but were to switch between 1X and 10X?? Yes, I can calculate for myself, but my DSO212 has the option for 1X/10X probe, I cannot find this option here. Can you please tell my where this is set?

This looks ideal if it wasn't for the crappy framerate, making it useless for audio signals. I guess I'll have to buy the $20 to get more than 5 FPS...

Is this a decent device for detecting distortion and clipping in car audio amplifiers?

@KEJA2k

6 жыл бұрын

Yes, Since car audio is generally 20Hz-20KHz even 10Hz-30Khz is well within Specs of 8MHz limit of this scope and should give a decent idea of frequency vs level and distortion. It is ideal for audio. This Scope was a crowd designed project back, starting in early 2006s from a few of us around the world centered in China. I was an early member and was involved in design suggestions and programming. Have used it for 12 yrs thru several generations. Mine is in a plastic prototype case before it went commercial. Probably the most sophisticated Pico Scope on the market. Chips have since improved a lot, so maybe it's time to upgrade the design to perhaps 20MHz and beyond, Yay Nice done Review

Can you show us how to set it up for automotive use?

@joachimjohan1215

3 жыл бұрын

yes can we?

sera q ele medi ate 40khz ? qual o maximo?

gostaria de medis cristal oscilador de celular queria saber se ele medi ate 40khz?

How many frequency sir

What is maximum input That it can resist Does it take 240v Input

@aviralpatel2443

4 жыл бұрын

pratik mundagod yes, it comes with a x10 probe

Can this find 20hz and below ?

does it have some circuit for protecting for higher voltage than max voltage?

@ELECTRONOOBS

6 жыл бұрын

Max transient-withstanding voltage is ± 400 V peak value. Measure voltage range Measure frequency range Max input voltage of logic probe is ±15 V peak value. I couldn't find in the manual nothing about protection against voltages higher than 400V. If you check the schematic here: www.elechouse.com/elechouse/images/product/DS203/DS203_Manual.pdf you could see some safty features! Keep up!

@ericaskari

6 жыл бұрын

Electronoobs thanks actually I wanna buy one but I'm worried about logic inputs if they get high voltage, may cause damage in system, they are very sensitive. but thanks, I'll take a look.

Needed for setting amp gains

can this do xy mode?

Service auto cars?

Looking for a bit of assistance How would i download the newest firmware for the DS213 i somehow erased the firmware from the device and its asking for anew i attempted to use the 1.24 link: www.minidso.com/forumdownload/DS213%20APP%202.14%20FPGA018.zip ....and the device isnt retaining the information thanks

how to gate some circuit for progming

@ELECTRONOOBS

6 жыл бұрын

Please give more details to your question! Keep up!

good review, but in reality it s just a really obvious copy of the review from Andreas Spiess aka "The guy with the swiss acent".

@ubidefeo

5 жыл бұрын

Pretty much what I thought, but he added the signal generator part and a few more bits :)

@jacobfield2214

5 жыл бұрын

Yeeeaaah, I noticed that too. Well made video, but almost an exact copy of Andreas Spiess' video about the DSO203. Though, he does include some content not in Andreas' video.

quiero una instruccion en el idioma español latino urgente

dear sir, its nice but DSO DS203 is expensive !!! sir, can you made and teach this kind of oscilloscope ? using stm32f103c8 (maple board) Thank you !!!

third.. #notisquad !

first like

hey if you dont have the 500$ for a scope ,give us 50$ will give you something to play with , that is the idea here :) and most of these videos , hey if you cant spend 1000$ spend something please

Starts with... this is an amazing product. Bullshit review