You're a menace to my financial stability! 3 times that I've seen a video of yours and immediately rushed to buy the subject of it. Great channel, don't stop.

@amayachannel4517

5 жыл бұрын

Same

@DoctorCalabria

2 жыл бұрын

Same here. Just bought the DT71 tweezers to complete the DSO and Screwdriver troika.

Scope called DS212...so he ofc has to play Azalea Banks "212" in background in the beginning xD gut gemacht :D

@reps

6 жыл бұрын

Aha, I thought noone would notice :)

@agumonkey

6 жыл бұрын

I knew it was suspicious.

Marco, if you were to make a series of tutorials regarding the proper use of the Oscilloscope, you would significantly improve the condition of mankind. Bis bald.

@DazzaDirect

5 жыл бұрын

hint HINT, ;-] please ;-]

@transkryption

2 жыл бұрын

tutorials on anything really... how to clean a room... how to avoid malnutrition at university... all güt !

@kyatto7708

2 жыл бұрын

I betcha guys enjoy his calming voice

@aneeshprasobhan

2 жыл бұрын

gay

Yes!, getting myself one of these. Oscilloscopes such a major part of my fault finding,testing and diagnosis work.

iconic listening to a faceless German voice extolling the joy of examining fine engineering.

Marco - you are a very bright man! Thanks you for sharing your insights. My DS212 is on its way, I'm very excited. Any additional tutorial information for people starting from zero would be appreciated.

OK.. gekauft. I love the way you did this "mini-review"

That looks cool, I think I can now justify getting my first oscilly-scope.

THANKYOU ! Your channel is excellent, and this is the best. I just bought one.

Nice work. I don't need one but its good to know whats out there and how it performs. Thanks for adding some good info to the community.

I would love to see this company do a benchtop scope with the same design philosophy. I mainly work with audio stuff, and it'd probably be so much more useful than a lot of the cheaper bench scopes that end up on a lot of audio workbenches.

Love your video content as always. Your channel would probably gain much more subscribers soon.

Even allowing for Toby's comment, below. I'M IN LOVE!

Marco your videos have noticeably improved the human happiness factor in Texas...

Volvo!! I just ordered this scope. Thanks for the review

Thanks for putting this out there. I'm buying a real desktop 4-ch oscilloscope but I was also wondering if there was a open source project yet. I will buy this for that reason to modify and build from it. And it would be great to take to work and find problems in the equipment at my print shop. So many times one of these would have saved me from hours of trying to find the problem.

Another great video again! Thank you for doing this for the benefit of everyone by sharing what you know! I hope you will continue and I'll wish you Happy New Year 2018 !

Yeah I have 3 scopes here but I always wondered about this little one, portable, descent quality, open source, accessories.. I may give it a shot too, thanks for the info mate!!! Your channel is AWESOME!!! =]

@cannaroe1213

4 жыл бұрын

Did you try it and was it any good? I'm shopping for my first scope :-/

@greenthizzle4

4 жыл бұрын

canna roe yeah I'm curious too

Very good video.. I've got this pocket scope.. had it for a while.. still very happy with it.

Curve tracing would be super helpful.... Thanks for the video!

I've seen a few of these around but it's good to get an honest opinion - looks like a neat bit of kit, handy for when a full-sized scope isn't practical.

@juancarloslincangogallegos3978

6 жыл бұрын

Pete Allum a (

I really enjoyed that Marco and of course nowwww I WANT ONE!!!!!

YOU ARE THE MAN! NICE ONE MARCO

I would buy asap. I love this chanel. Cheers from Argentina 🇦🇷

I love the look of the GUI elements - reminds me of the ancient X Athena Widgets (Xaw).

Open source, cheap, and looks great? Wow!

Looks very good and the price is very interesting!

Now these guys need to focus on making either an awesome open-source hot air gun, or an open-source desoldering tool. :o

surfing just took on a whole new meaning

This reminds me a lot on my DSO203 that I bought many Years ago.

Two videos in a week? It must be Christmas!

Loved the video, keep up the great work ♥

I really wish I had a use for a scope now.

Hates a tip: If you want to move the cursors for a loger distance just press the s wheel and spin it left/right to scroll faster

Nice little unit

I just bought a vintage analogue scope in perfect condition. But this one is one my list. 1MHz range is rather limited.

Ooooh, nice filter!

You’re so funny and clever. Hats off

Great voice over.

Hi and nice R & S scope

Great video! I don't need one but would love one anyway!

tnx for review. i'll order it.

Grat video & product. I have just placed an order on Ebay.

A great video. Very informative. I would have liked to hear the price at the time of production, but this is a minor matter. Overall excellent.

Nice new toy!

Thanks for showing 👍😀

Wow... Really nice!

Amazing!!! Last time I used one of these it was called a CRO 😊😊

@elgringoec

4 жыл бұрын

Yep, that's all I've got, still.

Perfect for my synth.

Hi, How does the output compare with traditional oscilloscope in terms of accuracy?

Great review (bless you)

Blesse you! :D

Great Video!

Thanks for the review. I've seen your review of the DSO112a as well. Which one do you hink is better? Can one use both the signal generator and the scope functionality on this one simoultaneously? Thanks!

Not bad for the price! The function generator is not very well characterized in the specs, but I guess it works at 20MSa/s and has no reconstruction filter. The 10MHz maximum in square wave mode and the 20KHz maximum in sine wave mode are giveaways.

There seems to be a model DS213 out now, 15Mhz Bandwidth.

Very cool. Thanks!

Cool stuff

Interesting find! Makes me think somebody could develop an oscilloscope which could use a smartphone as the display via Bluetooth or Wi-Fi.

I do not need one, but you made me want it really bad :-)

Very good

How does it compare with the DS102 and DSO Quad scopes? ouu uses the 303 instead of the 103

This is cheaper one and huge step back from 5 -year older DS203! DS203 is using slightly older generation of ARM CPU (Cortex M3) but it gets help from separate Latice FPGA to handle acquisition from external 40MHz ADC (schematic is here: www.minidso.com/forum.php?mod=attachment&aid=MjM0MHxhNmQzODAxZHwxNTI0ODU2MTYyfDB8NjY2). While, a shown, this DS212 has a single STM32F303 doing it all. Cortex M4 with FPU has a couple 5MHz ADC units built in. But continuously running ADC peripheral at this speed in STM32 is basically useless, DMA gets so loaded that you barely can do anything else. So what you do in this case - is loop sequence of three steps: , , . Which, if done effectively, provides robust UX. But internal ADC is crap anyway I consider DS212 a very good demonstration of STM32F303 capabilities. Well done! Kudos to the development team demonstrating great expertise in STM32 (like they do in all of their other products). To be noted - the same controller have been used in many quad-copter flight controller boards as well, new designs however already using STM32F7 (what is like 4x faster than F3)

5:48 It can play snake? SOLD!

@andrewdronsson9028

4 жыл бұрын

Yesss! A scope without snake cannot be professional one. :-)))

@nicknicolosi1

4 жыл бұрын

lmao, right? Old Nokia times hahaha

Great Review i always thought about to buy one but I chose to buy the rigol ds1054z instead.

All it needs is protocol decoding and I'm sold, but I'll buy it anyway as having a cheap scope to lug around in your toolbox is a must, for checking stuff like I2C, etc. I also wonder should I get this or DSO Nano 4ch.

@AJB2K3

6 жыл бұрын

What gen DSO Quad Nano? I have the first gen which suffered from noise. (Still present after the firmware upgrades.

Sweet!

Awesome gadget

G'sundheit ;-) Geniales Gerät, gerne mehr davon :-)

Nice!

Next one needs to allow wave generation from SD card using a certain type of audio file (some rate or something that lets it actually generate it)

5:29 Gesundheit! Thanks for the video!

Nice video, thanks :)

Ez Marco, thanks for your informative review. Would it be possible to tell me whether any of these mini scopes have 'Roll Mode' for the display, apart from the DSO112A model please? I need a cheap little scope to view CV modulation sources in my modular system and some of the cycle times will be over a minute or even longer - Is this what you need this feature for? It seems odd that the 112A has this feature and none of the other more expensive models appear to have it.

There is nothing in this video I don't like So I hit thumb up and subscribed! :D

You the best!!! GOOOD )) More please about self modification this model ..... Please )) Thx )

i like this company well

First time I've seen IAR embedded workbench in a KZread video...

thank you

5:28 Bless you :)

Well, that was refreshing...

Thanks for sharing :-)

man the stm32 is everywhere. even in my drone racing flight controllers

@DirtyRobot

6 жыл бұрын

Most of the innovation and push for better architecture has come from the quadcopter community. We needed to run more code faster for real time applications.

@superdau

6 жыл бұрын

They are really old actually. It's annyoing that Arduino picked the AVR atmega. The STM32 line is (and was for a long time) so much more capable for the same price. The hobby community definitely helped making it visible though.

Yes, another one. Now have some sleep, Marco!

You just made me buy this scope and soldering iron, was going to get their screw driver as well but it's out of stock xD

@reps

6 жыл бұрын

a little bird told me that there might be a successor of the screwdriver soon ...

@Arek_R.

6 жыл бұрын

Good, will wait. Have you tried running TS100 at higher voltages? Will it reduce lifetime of the tip/heater much?

Nice one. I will look it up, but does it have any digital filters?

My favvvv vido on ytb😁

We wanna see that Rohde Schwarz stuff! google told me its a bag for an RTM scope

Neat!

2:06 reminds me of my Rigol.

Please make a video of the ds213 comparing it to this one.

Can it calculate the total harmonic distortion of a signal? And have you tried adding new functions such as real time logging to an external UDB HD?

I would like to see a comparison of this type of scope with a USB scope. By that I mean a categorical comparison.

Looks like the rotary encoders make for much better usability than the awful touch-pad thing on the 202 they did.

does the probe have a x1-x10 divisor switch? and do the probes need to be calibrated?

And now it would be great if i could connect my PC/Tablet/Whatever to it and get the readings on a bigger display.

@LoganDark4357

4 жыл бұрын

Make a GitHub issue and it will probably happen

@zanpekosak2383

4 жыл бұрын

If they implement USB type C is should be perfectly feasable.

I'd like to see DS212 w/t battery and w/ better display (PPI), also a little bit powerful for ≈$80

M'era Luna! \m/

what is the max AC voltage this thing can accept?

huff so many videos :3