Mini Apex Variable Speed Abrasive Belt Sander Knife Sharpener
See this excellent new miniature abrasive belt sander made from thick aluminium plate with a 12V to 24V DC motor and 110V/240V AC Adapter that gives it 7 speeds. SEE OFFER LINK BELOW.
220V DIY Mini Belt Sander Knife Apex Edge Sharpener -- goo.gl/ULrgop
Пікірлер: 38
SEE SPECIAL OFFER LINK BELOW. 220V DIY Mini Belt Sander Knife Apex Edge Sharpener -- goo.gl/ULrgop Banggood Health Protection -- bit.ly/33tNTBx Banggood Health&Care Protection -- bit.ly/3d7QpSy
Sehr gute Aufnahmen, danke Mister
Thanks for this great find and review, Steve. Just purchased one and it arrived yesterday... brilliant, everything that you said it was. Cheers ! John
I just checked the price. Excellent value! Thanks Steve.
Thank you Steve for this good Video 👍 Just a little tip. Theres a grey iron ring slidet over the motor and yours is not snaped in to the square hole, as it suposed to be. So the air vent openings are covered and the magnetic flow is not as good as it should be 😉
Your accent and the way you speak is going to make me buy one and I don't even need it.
Most impressive Steve - and as you say, pretty nice build. Remarkable value it would seem... be quite a lot of work to make one from scratch!
@SteveJordan
5 жыл бұрын
Hi Chris I was thinking the same and one could use the same design, scaled up a bit to make a larger one.
very nice little belt sander.
That's nice. You need to add a buffer wheel to it. Very easy to attach on the motor shaft for more attachments like a cutoff wheel too!
@MattOGormanSmith
5 жыл бұрын
The motor shaft looks a bit skinny for that, but via a belt to a thicker shaft would be excellent.
Hmmm... nice find... for the price I might just have to get one... Thanks!
Steve that would be great for model building
@SteveJordan
5 жыл бұрын
Hi Yes it would be great for that.
I fastened mine down with a G clamp to my bench and it doesn't move. Good power for a small unit but not sufficient to sent it across the worksurface when clamped. Great little bit of kit.
looks good for the price but what is happening with the Allen bolts on the bearings above and below the tool rest. they hardly seem to penetrate the lock nuts?
surely you could make a disc sander part to fit this as well? Handy for scale modellers and those who do miniature stuff as well. Now checking for materials haahaha
Hi Steve,Thank you for the demo great piece of kit.Looking at your graving tools have you done a video of making and using graving tools if not it would a great one to do VERY interested. Cheers Allen.
@SteveJordan
5 жыл бұрын
Hi Allen Thanks. Yes I will do a video on the hand engravers at some point if I get the time. I made all the mahogany and brass handles on a wood-turning lathe, which I haven't got now. I can still do small wood-turning jobs like this on the metal lathes though. They are great tools to make and use.
I see that the motor mounting hole pattern indicates that the motor can be rotated by 90 degrees, what benefit could this bring?
Can it fit Worksharp belts? Thx in advance
will it work with 1x30" belts ?
Hello Friend! Can you tell me how to change the direction of rotation?
I am not quite sure if this is any better for tool sharpening so far as model engineering is concerned, than a conventional 1" belt sander but considering the amount of material in there it seems remarkable value for money. My only concern is the so called speed controller which seems to be a simple potentiometer affair . Surprising as with the availability of the cheap as chips Chinese PWM controllers from all the usual suspects. Perhaps with a better DC motor and controller the unit can earn its keep in the long run. Steve already has a decent 200W DC motor and controller which I believe was from an eBay source.
Steve what size are the belts??
hard to tell on the video but the rollers don't look crowned. If they were would that stop the belt doing the side to side dance? are all the belts for metal sanding? Thanks Steve for all your fine efforts on these videos.
@user-ks5ff
5 жыл бұрын
The wheels are concave
@SteveJordan
5 жыл бұрын
Hi Thanks...It doesn't bother me, but I may do some fine adjustments and upgrades at some point.
Hey, what a great video, I really liked that. SurvivalAustria
Will this sharpen tig tungsten?
@SteveJordan
5 жыл бұрын
Hi Marina, The abrasive belt I have on this one is for grinding sanding most materials. I don't know whether there are abrasive belts for tungsten as I haven't had any personal experience with Tig tungsten. Regards Steve
the unit is not earthed as it a double insulated power supply with 2 core d.c cable going to the unit
you can buy exactly these from alieexpress
Пользоваться подобными изделиями в 21 веке, это по меньшей мере - неприлично. В Китае не может быть качественного инструмента, к сожалению это истина. Но дизлайка не будет, меня забавляют такие видео обзоры.
2 min in ,come on maaaan ,say something meaningfull please ,do something
2+ minutes in and you're rambling about the power supply. Nobody cares. Just get to using it.