*Note:* Villagers dont link to things while sleeping anymore, click on them to wake them up, or only stack villages during the day:) *UPDATE:* 1.19.40+ changed ravager behavior, the kill chamber needs some small changes:) kzread.info/dash/bejne/ea2AlNxmoLfcfrQ.html *HOW TO EASILY FIND A 4 SPAWN SPOT OUTPOST! kzread.info/dash/bejne/gIx8sM2yZtbWmqQ.html* *NOTE:* You should build a roof over all of your villager pods, so that lightning can't hit them. Build it like the phantom roof (solid blocks then leaves) ITS HERE! It's a very long tutorial, but its actually a REALLY easy thing to build! Don't let the video length intimidate you :D

@starchaserxo

Жыл бұрын

Ahh, at last....🧘🏽‍♂️

@MrMartinezTKD

Жыл бұрын

Where can I find foxys chunk border texture pack?

@Justsayhiplz

Жыл бұрын

Will the 48 stacks work if there where 2 outpost very close to each other.

@casperghost9808

Жыл бұрын

For the trident killer switch you can staicase that redstone line to save yourself the extra piston and a few slime blocks.

@purpleparrot8680

Жыл бұрын

I WAITED SO LONG THIS IS BEAUTIFUL

Just finished building this in survival (PS4). A few notes: -24 villages is probably overkill. I max out around 12 active raids at any given time. Unless you can increase the rate at which you get Bad Omen, 24 really isn't worth it and should build 16. -when stacking the villages, make the bridge 3 wide for the section that runs from the beds to the work stations (expanding to the south). I found that after a while, my villagers wouldn't link but could fix by adjusting the path they'd follow. -add 2 high walls to prevent you/the villager/items from falling off. Having a roof helps too. - mark out every 15th block along the bridge (I used frog lights) to mark max bed placement distance. -you can move villagers during the day by placing work stations and beds. -if your "village leader" changes/unlinks then start over. You'll probably need to kill as many villagers as you place trying to stack all 24. -place leaf blocks over the beds -xp will only drop from the main trident killer if your simulation distance is set above 4 -test everything in a creative copy of your world before your real world if possible. You don't want a ravager unexpectedly spawning in your build somewhere because you missed placing some leaf blocks. Good luck

@Juan_andres00

Жыл бұрын

Una ayuda, cuando trato de vincular a los aldeanos por algún motivo no se vinculan y el primer aldeano no coje la profesión

@joe-cm4lz

Жыл бұрын

Do you or anyone have a tutorial on moving them during day?

@sc0rch3d

Жыл бұрын

@@joe-cm4lz you need to move the double set at night. Moving the single guy during the day is easy. He's locked to a bed. Place flexing table 10 block away and wait for particles. Place bed next to it and break old bed. Wait for particles on the bed then break fletching table. Repeat.

@joe-cm4lz

Жыл бұрын

@@sc0rch3d I got it finished, thanks for help

@chriskohlman3458

Жыл бұрын

@@sc0rch3d can I use mine carts to move the 2 during the day?

Pekoneko is a boss!!! Thanks for the all the effort put into the design!!! Thanks Silent for sharing this farm with us and taking the time to develop the tutorial for this raid farm to end all bedrock raid farms.

If anyone is having issues with their pillagers not spawning at the outpost site, check if your water streams are crossing the block under the glass where the spawn block is marked. If it is, take the water out and place it down again until that block is clear of water.

@mesaplayer9636

Жыл бұрын

This fixed most of my problems but I was still having problems with the furthest spawn spot from the afk area. I figured out it was somehow too high up and by moving that one cell down about 4 blocks it now works perfectly.

Footnote: make sure you light up areas where you use leaves. Outpost pillagers can spawn on leaf blocks at light level 8 and below or so says the wiki. It stopped raids spawning in places they shouldn't on mine. Since the light up everything works as expected. Good drills 👍

@SaltySyrian

9 ай бұрын

nothing can spawn on leaf blocks no matter the light level

Hey Silent, Small suggestion would be to make an excel spreadsheet of all the materials you need. I do this when following your tutorials and I think others would find this useful also. It allows me to check off what I've collected as I go :)

@steventhianpi

Жыл бұрын

click on Read More u will see the list, just copy them into your excel

@samuelsmithee

Жыл бұрын

he has a list

@Iano51

Жыл бұрын

This yes! I put mine in a book and quil on a lecture as I'm on PlayStation. You just need somewhere to store the numbers but very helpful.

@Robotito552

Жыл бұрын

What I do is copy the materials and put them on notepad+, I hope this helps =D

I've been waiting for this! As soon as I saw that short of this farm it inspired me to make a new 1.19 world for all mega mob farms with this as the centerpiece. I made your single raid farm design as my day 1 farm with this masterpiece in mind for the end game. This would still be worth it just for the gunpowder and redstone from the witches, let alone the absurd amount of emeralds and XP.

@yougotsnipedbro6060

Жыл бұрын

You got this in 1st day of your world ? (Refer how youtubers decieve us )😂

I just recently finished building this in my survival world. It was running 1.20.32 when I finished the main build, and on 1.20.40 now that I have officially worked out all the problems I was having. A few tips: Regarding the kill chamber: Make sure to see Silent's pinned comment about the changes needed to it. In addition to those changes, I suggest adding a layer of solid block and glass to the top of the walls around the spawn chamber. Extra solid blocks on the solid blocks, extra glass on the glass, then the leaves. In testing, I had ravagers bouncing high enough to hit the leaves and this would allow things to spawn on top of the kill chamber. Another issue I experienced was ravagers getting stuck in the glass at the back of the farm. I knocked out the furthest back (and lowest) piece of glass of each glass column (should be right above the water source blocks in the back of the farm). Using signs, I placed a lava block in this space. Whenever a ravager gets stuck at the back of the farm now, it dies in lava. I wouldn't do lava anywhere but that furthest back block though, as I had witches getting into lava and not dying (with their fire resist potions) and bringing the whole farm to a stop. Mobs have to die to keep the farm moving. Once I made that last change to relegate the lava to the back, I have been able to run the farm AFK for hours and have it not get stuck anymore. The non-burned mobs all get pushed to the end and die. There's a chance I'm getting less drops or something, but honestly I have more emeralds than I will ever need and the ~50 double chests (each) I setup for the non-stackable items using allays are all full. I'm debating building a castle out of emerald blocks just to flex since I've got so many. Regarding the village stacking: As of 1.20 villagers won't link to workstations while they're sleeping. To get the leader to link to the table, you need to place it and then quickly interact with him to get him out of bed and to link. Unfortunately, if you click his bed instead of him you will break it and have to start over since he won't be linked to either his bed or his table. I actually found it easier to move the leader during the day because you avoid that risk. Unless it's raining or snowing, the villagers generally track to their job table well enough. When moving the first village in, I suggest putting them at the first/closest cell instead of the last/farthest one. I was having issues with everything after the first village. I found a video by another youtuber Acadewolf talking about how he moved villagers in, and he mentioned that if you bring them in from within 31 blocks of the first village, it makes it more likely to succeed. I filled the closest cell, then built a closer bridge for bringing the villagers into the cell so I came within 31 blocks of that first cell. After getting the first one in the leaves, I used the same path build in the tutorial to move the second guy. It was flawless 100% for me after that. Save and backup your world after every single successful cell. Create a copy and test to confirm you created distinct villages as Silent shows in the tutorial. You don't want to get to the end and find some of them are broken. For the sorter, I used Rocket Builder's sorter. It's honestly overkill as I haven't seen the second shulker loader ever get an emerald, but it was a challenging and interesting build. When it was all done, I made a copy of my world and tested it there to make sure I wouldn't ruin anything. That's where I discovered the issue with the leaves, as well as a random block I had left that was allowing spawns. After you can test it in a copy without issue, only then would I suggest doing it in your main survival world.

@propanegames2806

7 ай бұрын

thank you so much for the tip i really couldnt figure out the village thing 🙏🙏🙏

@user-kq3oy4ye6u

6 ай бұрын

Thanks for the tips

@user-ef4qi8ik6m

5 ай бұрын

thank you

@potatoavalanche360

5 ай бұрын

Jesus Christ that’s the longest comment I’ve ever seen

@CommanderKay52

5 ай бұрын

@@potatoavalanche360 just trying to provide advice for future people attempting this as I was pulling my hair out trying to set it up.

Just finished building this and I have a few tip for people tackling this. This still works 100% after the kill chamber bug fixes. 1. Build the transportation bridge 3 wide. Yourself or the villagers themselves are a massive obstacle on a 2 wide bridge and they will fall off. 2. Place barriers on the junctions of the bridge, especially the first junction as the pathfinding will try to cut the corner leading to the villager walking off sometimes. 3. Light the bridge up with torches every 10th block, this is PERFECT distancing while moving the village leader to the end, placing the workstation and bed at every torch point. This distance I never had trouble with them linking to the new bed/workstation. with this tip I was able to fully complete 1 stack in a single night. 4. If the night ends mid transportation, just build a wall checkpoint and wait for night again and continue. 5. The incline to the villager holding pen/workstation can make it difficult for the villagers to link to beds, reducing the linking distance by half. Just make sure to gaps between bed linking here are tight saving them from wandering off. 6. 'Markers Pack' resource pack from FoxyNoTail, as mentioned for the chunk borders, is very helpful with an additional feature of showing you the time, so you can start the transportation process, bringing through your new set of villagers, at the right time. 7. After each successful stack is fully complete, sleep the remainder of the night away (with a bed away from the farm). This will stop Phantoms spawning in future nights, also decrease the wait to start the next stack. You don't need to go overkill with the transportation platform to make it safe this way. Patients is SO important, I had to start from scratch after 5xstack due to being impatient. I tried multiple different methods of transporting them to speed this process up, all failed. If 24x stack is too much, stop at 8 and completely cover the whole bridge with leaves so you have it there ready to continue.

@WuClear

Жыл бұрын

Legend 🙏

@mcbetutorialTH

Жыл бұрын

Thanks bro from thai

@kudzou_mc123

Жыл бұрын

Actual lifesaver tysm

@xXfrenchy1XxUK

Жыл бұрын

@@IEPPlayz I'm sorry I have never experienced this. Ensure there are no enchantments on your tridents other than Impaling ONLY.

@mohamedkasem2300

11 ай бұрын

When i get a bad omen a 2 bells hitting together before it was working well but now iam facing this problem

Lets go! I'm building this thing for sure. Love these tutorials silent.

Good lord, this is epic! Mad respect to Peko for designing it and to you for the clear tutorial. I won't be building it myself because villager wrangliing makes me tear my hair and I already have a huge surplus of emeralds, but I am in awe of the cleverness of the design. Cheers!

@nethermandie2635

Жыл бұрын

You'd hate joining my realm then it looks like a private version of 2b2t With the exception one rule do not grief farms be it villager crop or gunpowder And I'm telling you several of my friends practice griefing there and have been using it to test hack client's they Find spawns isn't as badly damaged as 2b2t's but that's because I built a massive villager breeder there so no one griefs it The reason no one touches the farms even though they could is because they don't wanna have to repair or build a new one later when they need that specific item

For anyone having villager linking issues - try placing down the bell again when you get to the end of the first night whilst extending your village (I never managed to stack a village in one night so when it gets to 'gathering' time the next day the villages tend to want to merge). This solved the linking issues for me for the most part. And if you don't get green particles when placing down the workstation at the end you have to start that village over. Hope this helps anyone struggling with the stacking part.

@enewton207

Жыл бұрын

Thank you… struggled with this so much 😂

@zensurminusmenschenarbeite2338

Жыл бұрын

some villagers dont want to connect to the bell after the process, with the workingtableconnection i have no problems, only with the bell at the end, i tried with the 13th villager Pod again and again (50 times now at least, im already getting a bit mad :D) but it dont want to work, do you have a tip for this issue!?

@veronicadanielsson

Жыл бұрын

@@zensurminusmenschenarbeite2338 hm.... not sure. I did use elytra and flew over to place the bell as quickly as I possibly could after workstation linked. Also made a little walkway by the observers so that I could very clearly see if the villager linked to the bell correctly... but yeah it's super inconsistent. Let me know if you figure this one out!

@zensurminusmenschenarbeite2338

Жыл бұрын

@@veronicadanielsson i gonna try to move the villagers to the pods, let them connect to their bell, and then i gonna push the villager into the water and move the other one to the other side, maybe this works :D.

@potatoatwork2795

Жыл бұрын

@@zensurminusmenschenarbeite2338 i have this problem rn, were u able to fix it?

Hi silent i was soo lucky when i spawned in my world it was a pillager tower with 4 spawn spots like 100 blocks away from my base! It didn`t even take one min to find it so perfect! i defently going to build this farm! Really cool design! Cred to you and Pico Nico

At long last, we have an emerald farm that holds up against Java! Thank you both so much for this!

@chachasmooth5863

Жыл бұрын

Nah java still got 100000 to 200000 emeralds an hour but we getting closer that's for sure

@migjordanpayawal7856

Жыл бұрын

Optimized farms are

@TimelessTraveller

Жыл бұрын

@@migjordanpayawal7856 Of course! :D

@claytonb8191

Жыл бұрын

Now we need gunpowder farms like Java

@skullgamers7375

Жыл бұрын

@@claytonb8191 yes basically bedrock creeper farms are useless you better just be doing a creeper hunting session at nighttime and that will give you like 2 stacks per night

This farm with the new allay sorting system is gonna be utterly insane and complete. Can't wait

As for anyone trying to build this in a snowy biome your will have to put signs in all of your water hope this helps

@xgummyx4250

Жыл бұрын

Does it work in a snow biome? As in rates the same? Also is there any other changes?

@videosaintloadingbutiswearif

Жыл бұрын

or just replace the blocks near the water sources with glowstone

@philipwhiteaker6617

Жыл бұрын

will pillagers spawn if the snow builds up on the top of the kill chambers?

@videosaintloadingbutiswearif

Жыл бұрын

@@philipwhiteaker6617 no

@MrCorpax

Жыл бұрын

Do not build this in a snow biome!! Soooo many issues that i did not think of.

Hi Silent, my OCD commitment to this project has paid off! Fully built, perservered and persevered with the villagers and got all 24 to link. It is a beautiful sight and unbelievable amount of loot. Thank you!

@Birdleyyt

Жыл бұрын

Can you please help me with the stacking? I have only gotten one village so far. When I think I have the second village added, (the second villager in the pod links to the bell) . I try and test it with the raid technique but both bells get activated at the same time. Which makes me think that it is one single village instead of two separate ones

@_kevin4elite_748

Жыл бұрын

@@Birdleyyt have you found a Solution

@Birdleyyt

Жыл бұрын

@@_kevin4elite_748 yes I did, it turned out that I had built the farm incorrectly, every block is incredibly important in where it goes and needs to be precise

@_kevin4elite_748

Жыл бұрын

@@Birdleyyt i did everything 1:1 But the villagers Connecting to wrong bells

@Birdleyyt

Жыл бұрын

@@_kevin4elite_748 are you making sure to do it one night per village and bell and also make sure it is fully linked so make a copy in creative and break the work and kill the villager to see if it works that way first, it will save a lot of time problem solving

GG Peko!! That is a mind blowing farm!! Thank you for the amazing tutorial, Silent! This farm is insane! Love how much xp it gives.

Assuming Strato's 24 stacked raid farm has broke due to updates, this is the best and biggest raid farm on bedrock edition. Amazing job to all involved. ❤️👏

@mieldavid9433

Жыл бұрын

There is a design which is bigger. It is named "next gen cashier," 128 village stacked producing 282k emeralds per hour. Im not sure if it's completely broken but I believe that it works currently

@Vocktile

Жыл бұрын

@@mieldavid9433 im pretty sure its broken

@mieldavid9433

Жыл бұрын

@@Vocktile is the whole thing broken or only the immortal pillager mechanic?

@akeldama3061

Жыл бұрын

@@mieldavid9433 It's a good point, and yes I have heard and seen it. I meant more for 1 player single dimension

@tomuchtoes449

Жыл бұрын

Does it still work?

Village stacking is the hardest part. Make sure at least one villager is linked to a bed at all times. Make sure your villager being walked to the far side is either linked to a work station or a bed. Never allow that villager to be unlinked to a bed and workstation at the same time. When you get the villager standing in the water linked to the work station on the far end make sure to break the unneeded workstation first, then the bed, then kill the villager. Only when done in that order was I able to get the villager in the water to link to the appropriate bell.

@sc0rch3d

Жыл бұрын

I'm about to start this part of the build. I thought stacking iron farms was frustrating. I'm prepping myself mentally for this challenge.

@gingercraftman

Жыл бұрын

Did you have any trouble with the villagers linking to the far workstation? After my first village was in placed, I've had nothing but problems with village interference. I can get them placed and linked, but not exactly in the place that is shown in the video.

@sc0rch3d

Жыл бұрын

@@gingercraftman I got 2 in place and tried getting the 3rd multiple times failing. I'm considering starting all over. I've already put in probably 20 hours at this point building the farm, I'm not giving up.

@Zsinje

Жыл бұрын

@@gingercraftman when I placed leaves on top of the bed for the villager near the bells before trying to link him to the far workstation he was unable to link.

@trustnotteo1545

Жыл бұрын

@@Zsinje i’m becoming mad i can’t put The fourth village at all… Did you guys found a solution?

Hey silent i love your work helps alot!

THIS is SOO good. Great job to Peko and Silent!!! Will be building this soon.

This is an awesome video! You have earned a sub, I am very excited to do this mega project on my survival world! I would love to see the tutorial on the sorting system

@silentwisperer

Жыл бұрын

Welcome to the silence! :D

Omg!!! I’m so happy that I just clicked on this video!! I used to watch you twitch stream all the time and watched all your KZread videos!! It’s been so long since I’ve seen them and they’re still as amazing as they used to be I’ve been looking for your channel for 6 years😭😭 I remember when you used to only have a couple viewers ❤️❤️❤️

@blamedsplash9712

Жыл бұрын

I remember watching silent survival all the time and watching you build all the amazing things that I wish I could have built. I idolized you in Minecraft and am just so happy I found your channel again

Tested in 1.19 creative (August 2022) before trying in my survival world and still seems to be working properly. Quick sidenote, after accidentally double clicking my mouse when placing the fletching table while walking my second villager to the workstation area I found that you can make sure the first villager is still connected by placing 2 workstations down. The villager in the water will still connect all the way round. Handy tip to avoid wasting time if the connection has broken

@Ayush62777

Жыл бұрын

U can also download his world, no need to build it in creative

@ph.blinkmark3566

9 ай бұрын

i have question in 42:03 , the first who link in workstation is the Villager and the last who link in workstation and will put in the Leave chamber is the Leader. am i right ?

Using allay sorters, you can use the sticks dropped from witches to melt iron axes and chestplates to farm a good amount of iron. Its a easy upgrade to this farm, and it takes less than 15 minutes to build.

@zytha00

Жыл бұрын

the crosbows cover about the axes dropped for smelting, stickes included it will not be enough to be self sufficient

The wait has been well worth its time, thank you so much for sharing with the community!!!!!! It's time to live forever!!!!!

Hey silent appreciate all the work you do. I built the old portal linking wither skeleton farm you made and it worked great, have learned so much from you. I’m having a few issues with this build though. The first problem was I had to build the original trident killer area up at 14 blocks instead of 17 to actually get my raiders to spawn in the kill chambers. Then I had to adjust the slime red stone and piston arm down a little but got that working fine. Do you know if that will cause any issues? Next the first villager linked across the build perfectly but the second one took a lot of finessing to get in my marker spot. The third one will not link at the marker spot location but one back to the right of the 2nd job block. Will this work or do I have to keep struggling with it? I’ve also read it just gets harder to place so can you tell me what parameters for job block placement are acceptable?

as always thank you so very much Silent for bringing the bedrock comunity another beast of a farm. I can't say enought how much your content contributes for the bedrock players.

@silentwisperer

Жыл бұрын

always here to help out as much as i can! :D

@drash122

Жыл бұрын

@@silentwisperer so it needs 4 spawn spots right

@royalplayz4274

Жыл бұрын

@@drash122 yes, no less or you won't get the proper rates

@drash122

Жыл бұрын

@@royalplayz4274 idk why I can't find any, I used chunk base website thing and I went to 30, non have 4 spawn spots

@royalplayz4274

Жыл бұрын

@@drash122 that definitely strikes me as odd, but I've seen a comment that says ouposts that exist in four different chunks have 4 spawn spots, so maybe try to find a outpost that's in a chunk intersection. Also remember that the spawn spots will form a square and make sure to follow Silent's instructions on finding spots. I know that finding mine took a while and i had to choose carefully where to sit to see if pillagers would spawn.

I love all the large farms you’ve been making! They’re all so amazing!

Thank you so much for this tutorial

Wanted to share something I found to help me get XP where before none of the XP orbs were falling down the kill chamber drop chute: I’m not sure what @silentwisperer had his simulation distance set at in the video, mine usually is at 4 chunks. I did some testing and found if my sim distance was increased from 6 or even 8 chunks, I started to collect the XP through water streams and a bubble column up to the AFK area. I don’t think I will normally play at 6 sim chunks but I will increase it when I use this raid farm. Hope it helps people!

@nethermandie2635

Жыл бұрын

😰😰😰 4 ??? Uh I have a question what kind of mc Player are you ??? PvP Builder Miner Redstone engineer Also how scared of mobs are you???? I can understand going as low as 4 if there's lag alot of the time but having that as your main sim distance???? I've only seen people use a sim of 4 when clearly lag or to reduce the amount of mobs that spawn when. They're at low health or have little food left

@scorpmajors1864

Жыл бұрын

@@nethermandie2635 Sim distance of 4 is kinda the standard for Bedrock because it is the default. The realms are set at 4 even.

@yaboibuddy6302

Жыл бұрын

@@nethermandie2635 simulation distance is not the same as render distance

@dylanb2990

Жыл бұрын

@@nethermandie2635 lower sim distance ups the amount of mobs around you

@nethermandie2635

Жыл бұрын

@@dylanb2990 it also decreases how many spawn at a distance it's easier to dodge a skeleton at point blank than at 10 blocks

Thank you!!! :) You always bring the best Farm Tutorial. You're the best!!

Let's go!! Enjoy everybody!! 😊😘 "please Mojang don't patch this"

@LocalJar

Жыл бұрын

You are a genius

@gemoflex_

Жыл бұрын

thank u your a legend bro

Hey silent could u maybe show more of the 48stacked version because i want to build it but i couldnt see how the back of it really works or the inside of the villages when they are so close to each other. Also the work stations. Could u please do a video even just showing those parts(not rebuilding the entire thing).

For people have problems with linking villages, it can only work during night time, so if it turns day time, just keep the bed and smithing table where they are until it turns night. Also, MAKE SURE to use only 1 smithing table in your inventory when bringing the villager over to the other side of the farm. Once the villager is at the over side, place the smithing table that you used to bring the villager over with that is still in your inventory, then grab a new fletching table and place it where silent does.

@frostyfallingleaves4828

Жыл бұрын

so could you help me? i'm at my 8th village, one villager is already in the cell, i moved the second one to the platform for the workstations... everything fine. but if i try to link the guy in the cell to a workstation he won't. i tried everything, from moving the villager back to the cellguy and start all over again, try to link the guy at night/day. but nothing works. even by killing the villagers and get two new ones the issue doesn't disappear

@Funny-up1xj

Жыл бұрын

@@frostyfallingleaves4828 try making the bridge wider that happened to me in creative testing it out so just made it 1 wider hope this helps

@viveksharma2426

Жыл бұрын

@@frostyfallingleaves4828 did you find any solution of this if yes then please tell me 🥺

@ph.blinkmark3566

9 ай бұрын

i have question in 42:03 , the first who link in workstation is the Villager and the last who link in workstation and will put in the Leave chamber is the Leader. am i right ?

Finally Finish it and works very well, tho one problem I found was that all the xp orbs get stuck at the edge of the water stream in the kill platform

Brb gotta build silent's 2x2 log farm just to build a storage system for this behemoth farm

If you are having trouble finding the spawning spots, do this trick that Silentwhisper said in his newest video. If the villager outposts door (entrance) is on the east or west side, it has 2 spawning spots. If it’s door is on the south, it has 1 spawning spot. If the door is on the north side, it has 4 spawning spots! Edit: 25% chance you will get a 4 spawning spot outpost.

@gurshandhillon5051

Жыл бұрын

Does this farm still work?

@MattSurge

Жыл бұрын

@@gurshandhillon5051 yes.

@breadpic2414

10 ай бұрын

I found a pillaged outpost with a northern door and it only has two spawn sites

@MattSurge

10 ай бұрын

@@breadpic2414 maybe they changed the system

The bad omen kill chambers wouldn't spawn pillagers for me and i triple checked to make sure i had done everything right so im not sure, but everything else works good. I had changed the 4 bad omen trident killers to a single platform covered in scapling and a water layer(mobs wont spawn in water but scapling keeps the water on the top so mobs can spawn with their feet on their spawn block) pushing to the center with a 2x2 drop shoot and a standard trident killer and it works just fine

Thank you for this you’ve helped me build so many farms on bedrock but I can’t find a seed with a 4 spawn pillager outpost and if there is one I don’t know the cords

@CyVinci

Жыл бұрын

Go to chunkbase to scout locations I found a four spawn location after scouting five outposts

Time to stay up all night to build this on my realm. Thank you Silent and Pekoneko!!

@ollyreith7589

Жыл бұрын

how’s it going

@loganbrown1878

Жыл бұрын

Currently searching for a suitable outpost

@codysavage6598

Жыл бұрын

@@loganbrown1878 I am tearing down my old raid farm to build this one lol.

@loganbrown1878

Жыл бұрын

@@codysavage6598 lol no use for it now!

@joshuagilbert7976

Жыл бұрын

Wait this will work on a realm? I thought the 1 player thing he mentioned meant only on single player worlds

I have built this amazing farm. I am lost on doing an item sorter. Will you be adding an item sorter/storage tutorial for this farm? Thank you for all your videos!!

@xg8306

Жыл бұрын

Does it still work by any chance?

Awesome design! Thanks Peko for building it and Silent for the lovely tutorial! I have a question though. Can you use Minecarts to transport the villagers? Or are there linking issues when doing so? Thanks!

@silentwisperer

Жыл бұрын

your not really moving the *villager*, your moving the *village*. you have to build it as shown:)

@zuton_

Жыл бұрын

@@silentwisperer ok thanks!

@sophomaniac3146

Жыл бұрын

​@@silentwisperer Another option i used... If you don't want to move them, as shown (only reason I see is losing nighttime and/or wanting to do during the day). I play with some family on a realm. At least 1 person, doesnt do well with mobs so wants to sleep at night. So I found daytime movement to be a necessity. How I did it during daytime, was to get the villager into a boat or villagers into separate boats for first part on a lead. They would drag behind me as I walked. ** You still have to do the motions with stations & beds. As silent said, you are not just moving the villager along, you are shifting the location of the village, within the perimeter of another village(s). Put down beds side by side on my bridge. bring villagers from nether, and get them into seperate boats. Then standing on them beds, reach out as far as you can, about 6- 8 blocks. Place 2 more beds side by side. Break 1 bed below you that they are connected to. Wait for particles, break the other bed and move up and stand on next bed.. Wash, rinse, repeat. Walking at a slow pace, I generally didn't have to turn around even to look at the villagers for particles on them, just watching bed/station. But, you do need to make sure you move slow or leads will break. After water villager is in the cell. Just pull 1 villager on a lead. Just make sure he stays connected to either his bed or workstation at all times. I will say at nightime, its far easier to follow the video method. Im just giving a daylight option for moving. It's critical that connections are made before moving along the process. It's not about moving villagers, it's about changing the village location, to be within binding area of other villages.

love the tutorial the villagers a massive pain but everything else is easy and fun

This may help people who have villager linking issues. I have found the key for me is the distance between the beds when walking them to the holding cell and the same when walking the villager to the final workstation. I am currently just starting the last level and I have four blocks between the beds when sleep walking them to the cell. Ie bed, one empty block, bed on other side of scaffolding, another empty block then a bed on the other side... if that makes sense. When I am walking them to the end work station I move the workstation 4 blocks and have the bed pillow next to the workstation. I also put the bed and work station on every stair level going up or down. Takes about 5 nights in total for each one but that is better than nothing after 3 nights. At this stage this is working for me

@charliewalker9148

Жыл бұрын

i have a problem, when i bring villagers through the portal they automaticaly link to the other belll from the first village so it doesnt become its own village what do i do

@frostyfallingleaves4828

Жыл бұрын

@@charliewalker9148 try to put the portal more blocks away. I've the portal around 250 blocks away... it's a lot more work, of course, but therefore i don't have to worry about getting the villages seperated.

@charliewalker9148

Жыл бұрын

@@frostyfallingleaves4828 i found my problem i didn't put down a bell straight away and they hadn't linked to their beds properly before I deleted them i understand the whole process properly now i wish he explained the game machnixs

@frostyfallingleaves4828

Жыл бұрын

@@charliewalker9148 i'm glad hearing that 😌

@charliewalker9148

Жыл бұрын

@@frostyfallingleaves4828 thank you though :)

I was so excited for this farm to come out and I still haven’t build one 😂

I'll be back for this tutorial after I build your trident farm and slime farm in 1.19. Missed the first half of the year fighting cancer and finally get to jump into the new update with a new world - unfortunately means I am rebuilding everything but at least you're getting those extra views, Silent!

@dogmoment7445

Жыл бұрын

I hope your doing ok! Fighting cancer must have been a hard battle to fight.

@dontwatchmyvids61

Жыл бұрын

Half year is rlly short my friend is still figuhting after 3 years ik glad u made it:D

@probablyaparent

Жыл бұрын

@@dontwatchmyvids61 I'm two years in, just spent the first half of the year in the ICU and having surgeries so I missed six months of videos and tutorials. I hope your friend is in remission or on their way to it.

I want to extend a HUGE thank you to the people giving tips in the comments for villager linking in this video, especially Micheal Parente. You helped me get this farm off the ground. An additional note that I found during my testing: Sometimes the pathfinding of the villagers can break when linking the upper and lowermost levels of the farm, removing their abilities to link to workstations and beds. I believe it is due to the steepness of the stairs, I lengthened each step to about six blocks long for each and it worked out great for me. Stay safe and good luck with the farm!

@nickeltek

11 ай бұрын

Thanks for this comment, I'm in the middle of stacking right now and it's great to know it's still possible in 1.20. I'm getting to a mode where the 2nd villager in my 4th village just can't get past the top of the staircase on the workstation side. Needs to go just 10 blocks more, but refuses to, and this is the second villager pair I've seen do this. I wonder if this is a sign that some of my first 3 villages are cross-linked, but without a creative copy, I don't know how to tell!

@barrelboi439

11 ай бұрын

@@nickeltek Even if it does set you back, I would highly recommend making a creative copy of the farm, as well as doing your own modifications and research, doing all that will ultimately save you more time in the long run. This farm is pretty damn janky.

@barrelboi439

11 ай бұрын

⁠@@nickeltek As an example, I learned that on rare occasions, raiders actually can get their heads stuck in the glass blocks of the kill chamber, swapped the glass blocks out for panes and everything was fine again.

It only allows me to do 5. Villagers won't even link to the bell anymore and if they do I bring em to the villager chamber and then down the bridge a little and it's like they hit a brick wall. I tried everything I could. I tried expanding the bridge and making it further away and it still doesn't work

How many must I flat down the Area around the Outpost? Thank you so much for this video it's all compact together here!

This is MEGA. I invited me and my 16 friends and got it done in about 2 ish hours. It was tedeous but worth it. Huge props to piko niko and silent. What im trying to say is thankyou and u guys should build it.

@berno7893

Жыл бұрын

16 god damn

@mindful_knight8035

Жыл бұрын

Its true. We did do it in 2 hours 18 mins so close enough. Anyway sent u message on discord friend WE NEED A BETTER TRADING HALL!!!

@minecraftstuffiwatch4375

Жыл бұрын

@@mindful_knight8035 Ok we should get one on the server. Shal i ask john about a design?

@mindful_knight8035

Жыл бұрын

@@minecraftstuffiwatch4375 YESS! i will tag him for u. @The mindful gamer

@themindfulgamer7792

Жыл бұрын

@@mindful_knight8035 hi. Yes we should do it. Just so you know the tag didnt work. I was just reading past comments of people so i can try and answer questions. Anyway lets keep it professional. I will message u on discord later.

For those struggling to find a 4 spawn spot outpost: If you have the chunk finder texture pack, this is a really easy way of knowing if an outpost has 4 spawn spots. If the outpost is on the corner of a chunk, it will have 4 spawn spots. One will be on one chunk border, another on the other chunk border, and another on the chunk corner. Hope this helps speed up the process for you

@michigain

Жыл бұрын

I wish I saw this comment before spending 3 hours finding an outpost with quad spawn spots

@Vanix0609

Жыл бұрын

@@michigain Yea, took me 5 hrs. Would've been way faster with this

@justaregulargymrata

Жыл бұрын

By corner you mean like there is at least 2 points touching the chunk border and the pillager banners are going into the next chunk right

@Vanix0609

Жыл бұрын

@@justaregulargymrata Yes, that is correct

@generaljohann5581

Жыл бұрын

@@michigain 8h

does this farm work optimally with the bad omen debuff? or is the new v7 farm the best one to build now?

The nearest allays to base camp was right next to a 4 spawn outpost time for allay breeding and raid farm combo.

If I remember correctly from 0ld Guy's video where he was explaining structure spawning spots the outpost you want to look for will need to be in the SE corner of a chunk to have four spots. An outpost in the middle of a chunk will have one spot, an outpost along the east or south edge of a chunk will have two spawn spots and one that is wedged into the southeast corner of a chunk will have the four spawn spots configuration. EDIT: 16:34 You can actually see the layout here.

@thewdsftw9417

Жыл бұрын

I’m struggling sooo much, is it possible to get one with only 3?

@seangoldman6833

Жыл бұрын

@@thewdsftw9417 As I understand it no, the structure spawn spots are limited to one per chunk. The outpost being on the edge of a chunk gives it access to a second chunk so there's a second spawn spot. The outpost in the corner is considered to be a part of four chunks so it has four structure spawn spots.

@kanyewest5216

Жыл бұрын

@@thewdsftw9417 i had to check like 8 different outposts

@fboialert2750

Жыл бұрын

@@seangoldman6833 so if an outpost appears to only have three, it definitely has four?

@jacksonadams2770

Жыл бұрын

Am I able to use chunkbase to see if it’s on the south or east edge of the chunk

Thanks @silentwisperer I built this in my survival world. I massively underestimated the effort. I am on PS5, 1.20.81 and I have a bit of lessons learned: * The idea that this is easily expandable and you can start with any number while technically true, it's not easy. The platforms to bring villagers around needs to be removed or spawn proofed, and it's a lot of effort to tear down and rebuild in survival so just commit if you are gonna try. -- Even testing required removing all that infra... Learn to use /fill in creative copies to make that easier. * For me, using a boat helped during the day time to keep the villager close to the bed and job sight. If you place two job sites and remove the first you will get it assigned to the villager in the leaves. So, with the villager in a boat, bound to a bed, and no job yet: 1. Place job, and bed 10 blocks ahead of the current bed. 2. Ensure green particles or move job site. 3. Place extra 3rd bed next to job site (He's now bound to old bed and new job) 4. Remove old bed in the way. 5. Get in the boat, and scoot toward the job and bed from 1 and 3. (Ensure the green particles appear as you're driving the boat up. Repeat. * If you have linking issues route further out (perpendicular) to the bed-job village stripes. Especially if it starts to occur as you fill your villages * I don't think you need to flatten as much as silent shows, he didn't say how much. If you afk where you are supposed to, I don't think they will spawn in chunks too far away anyway. So you mainly need the area under the kill chamber and beds. I think you can do 1 chunk more in each dir to be safe. Silent looks like he did 6 chunks in all directions for flattering. * Spawn proofing seems to have changed. Things CAN spawn on leaves so you may need to add torches as well to limit that. * I also needed a trident farm and had to kill the wither to make a beacon. Building the kill chamber was a pain in the butt because of so many tweaks. I recommend, build it in creative, apply the fixes, learn how it works and then replicate it in survival. Kill chamber v2 or so has 3 funnel flows so you can use WAY less tridents. * Chunk locating is easy without addons, just find the numbers divisible by 16. That's a NW corner of a chunk. *** Where you are affects how the system works, stay in the afk chunk to observe things. Free cam would ve very nice.

@ajaxplays5298

17 күн бұрын

Hey quick question for ya, while your moving villagers I'm assuming your on 1.20 most recent update but back to the question while moving the villager with the workstation at nigh time do the villagers link to a work station while in there bed for you because for some reason when I try and transport my villagers I have to take them out of their bed for them to link to a fletching table. Just curious if them linking to workstations while in a bed was patched or something.

@johnbutterfield2635

17 күн бұрын

No. They don't link to the work station while sleeping. The only time that mattered for me was when I had both villagers at the bed installation and wanted to see which one was first to link to the job. So use boats or wake both and place the job really fast. Generally while moving the second villager with the job site I kept him in a boat the whole time.

@ajaxplays5298

17 күн бұрын

@@johnbutterfield2635 Ah I see thanks man, appreciate the help!

@johnbutterfield2635

17 күн бұрын

I tried flattening to an extreme, and even lower and IT DOESN'T WORK. What happens is they will still spawn there and then respawn and it counts as a kill, but you don't get items and exp and it isn't great. I found putting leaves on the 3x3 chunks below the kill chamber completely fixed that problem. Also I don't get invisible exp orbs. They just don't spawn unless you're closer. You can use 2 players, or start the raids and then go stand on the chunk boarder where the orbs start appearing. You will be out of range of bad omen though so it's pretty broken.

Something is destroying only my leaves at the kill chamber causing it to break. No other blocks are destroyed, just some of the leaves. I think it's the ravagers' charge which can destroy leaves. To test this I moved the leaves up one block above the kill chamber roof. Doing this causes some of the mobs to glitch up, so I had to double the layer of blocks on top. Then leaves on top of that.

@eier81

Жыл бұрын

What I noticed is the ravagers can somehow spawn in between the leaves and glass, where the rows of glass are... Ravagers destroy leaf blocks when they walk through them... Sigh. For the glass rows, I used 2 layers of glass (basically just add a layer of glass on top of the existing rows)and then leaves on top. That seems to have fixed it. The issue I'm having is the mobs get stuck right where the tripwire hook is.... Still trying to figure a solution... This farm is the most annoying of all time... Don't build it! I only got 2 villagers linked and could not get any more. Even with 2 it's a lot of loot

@japper8319

Жыл бұрын

@@eier81 yeah thats exactly the problem i am having rn. If i try to do a 3rd village it just refuses to claim a bed inside the cunk of the villages.

@eier81

Жыл бұрын

@@japper8319 it's so annoying... And yet with just 2 villagers it produces a ton... If the pillagers don't get stuck somewhere

and quick tip @everyone, add a roof of halfslabs and leaves 13 blocks above your villagers. So that lightning doesn't turn all of them into witches

@LavaSurfer3K

Жыл бұрын

and yes, I speak from tragedy (experience)

@joshdb523

Жыл бұрын

@@LavaSurfer3K ouch. I just put lightning rods like everywhere

@LavaSurfer3K

Жыл бұрын

@@joshdb523 make sure you don't put them within 13 blocks, otherwise you're just adding a magnet to your villagers

@LavaSurfer3K

Жыл бұрын

@@joshdb523 make sure you don't put them within 13 blocks, otherwise you're just adding a magnet to your villagers

@trevorstewart1989

Жыл бұрын

Regretting not seeing this sooner. Lightning storm just came through and the next time I started my raid farm things went to hell. Have to rebuild now. /cry

Hey Silent, I’ve been having a problem with the middle layer. The villager in the leaves isn’t linking to the workstation when its on the marker block. It links everywhere else but the marker block. Also the villager not in the leaves always links to something invisible and doesnt link to the bed or the workstation. Ive tried everything to fix this.

This is madness... This. Is. SILEEEEEENT!!! This design and the time that went into it is just crazy. So many incredibly talented players out there for a simple block-based sandbox. Serious props to Peko for the design work and El Piggo for the in-depth tutorial. That said, I'll never be able to bring myself to make this as all the villager work WOULD drive me to madness. HahahaHAHAHAHAHAHAHAHAHABWAHAHAHA*hackcoughwheeze*

@everettj6037

Жыл бұрын

Same haha

Good day Silent. My outpost spawn spots are in 4 chunks in a 2x2 square, but according to chunkbase, the outpost chunk is the southeast chunk of the square. Is it ok of all 4 spawn spots are in different chunks, and more importantly, do I count 5 chunks from the outpost chunk, or 5 chunks from the most western spawn spot?

@ryangiddings9949

Жыл бұрын

Did it end up mattering

@dr.dman348

Жыл бұрын

@@ryangiddings9949 I don't know, I haven't had the motivation to build the farm yet. I don't think so though, he explained it in a video, I forgot which one though

@silentwisperer I'd assume that if you have an outpost of 2 spawns you would do everything you've shown but in half? So half the villagers, rail system and jobs? Or what if you have a multi spawner outpost but only want to make 1 trident killer = only 6 villages, assuming you can always just add to it in the future to make it a 24 stack?

Can't wait for the item sorter tutorial for this

You should build a updated guardian farm for 1.19 :) I feel like a lot of us would find it very useful at this time

@ammarahmed219

Жыл бұрын

Don't worry because at the end of the day they are a lag machine

@ammarahmed219

Жыл бұрын

Also the old guardian farm still works

Hey silent, I don't know whether you're going to read this, but could you make a tutorial as an addition to this video? I once watched a Minecraft KZreadr that built a redstone/lapis lazuli farm out of a raid farm, he would go and get hero of the village 5, then he would use approximately 180 cleric villagers to make an artificial village and then they would give tons of lapis and redstone, it's an amazing farm since I think this is the only known method of farming lapis lazuli without mining it.

@silentwisperer

Жыл бұрын

yea you can just trade to whatever villagers you want. the hero effect lasts for 40 minutes :) also this farm produces a lot of redstone already! The witches drop it!

@connor9383

Жыл бұрын

That farm you saw was for java rather than bedrock

@finneganbailey8895

Жыл бұрын

@@silentwisperer Do you know what the rates for redstone and gun powder are?

Silent should I dig out the entire place u dug out or just the chunks

ok so do i need to keep riding the rollar coaster when i have started a raid in all villages or can I just be done and stay at my afk platform. also what simulation distance should i use

I know that you are working on stream to design item sorters for big farms. But would it be possible for you to design a specific item sorting setup just for this raidfarm?

@liminalnetworks7691

Жыл бұрын

Check out Rocket Builder kid is a genius for item sorters

@MissingStripy

9 ай бұрын

@@liminalnetworks7691 Already saw it like a day later lmao. now rebuilding it 7 months later on a new world

For anyone having issues with the villager in the leaves not linking to the fletching table, it's because they have linked to an existing bell. Here's how I worked around the issue. As soon as it's sunset I got 2 villagers through the portal and linked them to the beds and bell. Then I got the first villager into the leaves and the second villager down the bridge towards the fletching tables by at least 64 blocks. Then I boxed them in and waited until the next night. The next night I got the second villager in place and the first villager was able to link to the fletching table. Staying within simulation distance of the first villager during sunrise or day time give them the chance to link to an existing bell. Hope this makes sense

@BigBrotherIsTooBig

Жыл бұрын

I had the same problem. Flying over to him so the chunk he was in was loaded allowed him to link.

@solaceofflame

Жыл бұрын

Thank you.

@glitchych99tahs39

Жыл бұрын

do you know how to make villagers stop linking to other villagers bells (im on realms if that helps) please respond as soon as possible because i dont want to through the 15 hours worked on this farm down the drain

@MattyBGAMINGUK

Жыл бұрын

@@glitchych99tahs39 try what I mentioned. Get the first villager in the leaves then get the other villager away by more than 64 blocks before sunrise. Stay away from the villager in the leaves until they're linked to the fletching table

@sponge6352

Жыл бұрын

@@MattyBGAMINGUK I tried what you mentioned to only find out that the first villager never links to its workstation but always to the bell I place after killing the secondary villager. It never links up to the fletching table whenever I have it on the marker block. Only when I put it a block behind it or behind the previous villager fletching table the villager links up to it. I don’t know whats the problem, if its merged or something completely different.

I got it to work, when linking villagers make sure your bridge is pretty far from the village stations, after getting one villager in his station I moved the other during the day with the work station. The only problem I’m having is the farm isn’t killing the ravagers but I’m about to figure that out. Other than that it works great

OMG TYSM THIS IS AMAZING

Hey Silent, would it be possible to move the villagers in place with boats? Great tutorial btw

@jaskamalsingh7839

Жыл бұрын

Have you tried

@Skully917

Жыл бұрын

@@jaskamalsingh7839 its not possible you need to slowly move them with the bed and work station so they dont disconnect snd start a new village

go to base of the outpost and make sure the door is on the north side! outposts with doors on north side have 4 spawn spots! Like this so more people see! Stop clearing the top of every outpost, then filling with glass panes. first, go to base of the outpost and make sure the door is on the north side. use your map in creative and make sure youre pointing north. also, (i only say this because i saw someone else had this problem) make sure your glass panes are at head level, meaning they should be floating 1 block above. also, make sure difficulty is on hard to spawn evokers

@javieryerenagomez7242

Жыл бұрын

Thx

@atlas9129

Жыл бұрын

Bro ur a life saver thxs

finally finished this farm after i dont even know how long. The hardest part was not getting the villages to be a deprived 5 yr old and getting 24 BELLSSSS. works insanely. i afked for around 5 hours and got 2 stacks of emrld blocks + i got so many totems im just filtering them into lava now lmao

@silent what is the rates for 48 stack, in redstone/gunpowder?

Hey silent, I have this fully built up but found that raid mobs are getting their heads stuck in the glass. I replaced it with glass panes and it seemed to have fixed it. Just wanted to let you know for future iterations.

@jorgevieiragomes3592

Жыл бұрын

does this farm still works?

@KuranHussein

9 ай бұрын

I also replaced the glass with glass panes but they still get stuck in between them and when they don’t they do not trigger the string to activate the pistons to kill the ravangers

In the process of building this; scouted five outposts before finding one that borders a south East chunk. Flattened out a 128 block perimeter around it for aesthetics and just finished gathering the materials. Getting the 35 Impaling V tridents was tough but this will be so worth it.

@Future.Star.

Жыл бұрын

Lol same how the farm going I'm just about to start getting the villages stacked

@CyVinci

Жыл бұрын

@@Future.Star. farm is incredible a pretty good collection system is needed because of the sheer amount of items dropped best bedrock farm I’ve seen. Stacked 18 villages instead of 24 and it’s more than enough tbh.

@Future.Star.

Жыл бұрын

@@CyVinci how did you collect all the items

@CyVinci

Жыл бұрын

@@Future.Star. Rocket Builders item sorter he made specifically for this farm. Recommended

@SmokedSubie

11 ай бұрын

i can’t figure out how to get the spawn era to work

I'm still enjoying 1.19.22 on pe I don't want to update yet. Trying to build this in creative copy first. Outpost nearest spawn door faces north and 4 spawn points. -600,608/-592,608/-592,600/-600,600 and the -600,600 is the N.W. spawner. Chunkbase gave me -592,608/-577,623 so got 2 spawners on a chunkborder not sure if that's gonna monkey wrench things. At the spot where bad omen built now 5 chunks west.

Preparing to build a raid farm just finished my iron farm this is the raid farm I want to build in my survival world few farms i want to build first for example a fortress farm and a shulker shell farm

I'm not sure if the recent update changed how the pillagers spawn at the outpost, but I've found that the pillagers WILL NOT spawn with the water present. It seems that the easy workaround is to have the water a block below the spawn spot and obviously moving the piston down a block as well. Talk about infuriating to finally successfully stack all those villages, only to test it in a creative copy and find that the pillagers won't spawn! Having fixed that small issue, the farm is absolutely insane! Now just to find an allay to start sorting out the totems and books...

@peterhiggins8222

Жыл бұрын

Make sure water isn't on the spawning spot, put a block down then break it to stop the flowing water

@sgctactics

Жыл бұрын

@@peterhiggins8222 Tried that, found that the issue was that I set it up with fire disposal instead of cactus so the water flow didn't prefer flowing down for some reason and would flow in that corner even after the place/break a block method. With cactus it works just fine without the hassle, I just prefer the cheapness of 4 netherrack 😋

@joe-cm4lz

Жыл бұрын

Is it still working?

@sgctactics

Жыл бұрын

@@joe-cm4lz so far so good, though every once in a while the ravagers break some leaves and haven't figured out a workaround for that just yet. Probably just operator error, lol

@Bird_Of_Flames

Жыл бұрын

@@sgctactics I know it’s been quite a while since your comment, but did you follow his other video explaining how to fix the ravager problem

Great video Silent. Just a question anyone having problems with the villager at the end not binding with the bell on the observer. So do and some don't. Please advise

@alyssagabriellerobinson7475

Жыл бұрын

I am having this problem as well. help!

@FollowTheNamee

Жыл бұрын

Okay so I think I found a fix, it worked for me, before you start moving one villager to the workstation, put up a bell on the observer and make sure both of them connect, the villager in the cell will stay binded, so just place the bell on the observer when you have both villagers at the cell

@harshalpatel8186

Жыл бұрын

@@FollowTheNamee so just put a bell down after you get first villager in leaf cell, while the other villager is still there. and then leave the bell there and then move the second villager to the other side? does that work guaranteed?

does the leader of the village matter during the linking process? or does it only matter when we place the bell at the end of the linking process

Built this farm and most of Silentwisperer's farms. Works good( 24 is too glitchy for PS4 ) however I do have one issue that I don't think has anything to do with the build and more with the game. ALL my tridents have to be REPLACED everytime I leave the area and come back. They fall through the block(s) and I can't find anyway to stop it. Maybe with less stacks it would load correctly and not fall.

I’m at the villager stacking process, but when I do it the villager will not link to where it is supposed to but when I place the workstation in a different spot it will link. Is there any way I could fix this

When moving the villagers in the beginning, why does it matter who the leader is if whatever one picks the station first you use?

I built afk platform 3 blocks higher than I should have is it going to be fine or do I need to spend an hour moving it down 2 blocks

Do the pillagers to start the raid just take forever to spawn? I’ve been having troubles, & I don’t want to build the full thing if I can’t even get the starting captains to spawn.

This might not matter but at the point in the video where you say to put the 3 leaves in around the redstone lamp, don't forget the extra row of leaves on your platform. They just appear out of nowhere and if you start the roller coaster off the platform without the extra row of leaves, it'll be off by one block....

@aiwanchu3719

Жыл бұрын

Exactly what happened to me. I was one block off and realized when putting the rails on.

@jeremywalker666

Жыл бұрын

Same happened to me. Im having trouble with the border of village 1 binding with village 2. I even tried moving the bed by only 1 block and still having this issue.

@troyharlow24

Жыл бұрын

Yes, had the same problem...had finished building structure, something looked off. Found by re-watching about 3 times

@kingofswag1234

Жыл бұрын

@@jeremywalker666 did u fix it? having the issue right now assigning the second villager to the table

@jeremywalker666

Жыл бұрын

@@kingofswag1234 yes i did. Did you try going through my check list?

hello silent, thanks a lot for all that you do for us !I have some questions for this farm, once the first villager ( not the one who link to the workstation ), is stuck in his leaves and water box, and that we need to move the second one to the opposite side of the farm to extend the village, we were placing our workstation and a bed next to it after breaking the last one, and the villager did not link to it, it was the one who is stuck in water, far away, who did. So we broke the workstation it and placed it again, and the good one linked. Is that a problem that the guy who is not meant to link to the workstation did ? And if breaking it while the guy is sleeping, to replace it to make it link ? We also want to know if we can move them directly from the portal to the leaves boxes in a minecart, and after that moving them with your tutorial method. So if we right understood, we do NOT have to break the bed before the second guy linked to another workstation ?

@bradmullins9103

Жыл бұрын

Same issue.

@ulsleezus7634

Жыл бұрын

@@bradmullins9103 okay so I tried again right now and you need ( for the village extending ), to break his workstation, place another with another bed, and ONLY when he is linked to the new workstation, you can break the bed, and repeat the process. If you do it by the right way, there is no reason to go wrong

Hey I have a question, if you flatten the area out, does that simply mean that there can't be any blocks above a point or that there actually has to be a floor at a point. I guess what I'm wondering is if this could be built using an outpost on the very peak of a mountain

@petterpettersen4416

Жыл бұрын

no blocks above the point, you dont need a floor if you dont want too,

@hollysol4845

Жыл бұрын

@@petterpettersen4416 thanks that helps a lot

@petterpettersen4416

Жыл бұрын

@@hollysol4845 yesnso two block below the floor of the outpost in an area of about 7 by 12 chunks can not have any blocks.

Hey silent, do we need to remove the torches from the bad omen generators for the farm to work properly?

@zkg156

Жыл бұрын

No leave them in there

Finished all 24! It was painful, but after getting in the groove, I could stack a village in a night! -I used 2 wide tunnels with 2 block high walls, and markers and a roof every 10th block, this was where the workstation would be placed, so the villager would not climb on top of the railing, a problem I had. -I do not understand villager stacking mechanics, so when silent placed and broke a bell at the portal, placed and broke a workstation at the choke point, I did too, just to be safe. -I saw a comment that said after stacking, you break the workstation, bed, then kill the villager, Im not sure if this had any effect, but I did break it in that order and there were no problems. -for the first 8, I tried stacking some in the day, it was decent, but I had alot of problems with the workstation linking for the pod villager. -NEVER LET THE SECOND VILLAGER UNLINK. MAKE SURE THEY ARE LINKED TO EITHER THE BED OR WORKSTATION AT ALL TIMES. -If the second workstation does not link to the pod villager at the block markers, but infront or behind, i would restart. I had that same issue for a couple villages and tested raids in a creative copy and had a couple stacking issues, so I would just restart. -If you are very slow at stacking, that is fine. Stacking can take 2 nights, the first night should have the pod villager in the leaf pod, and the second night should bring the second villager to the other end. If you were not able to bring the second villager to the other end, box him up and wait for night. Doing it in the day can work, but I like to be safe. -If placing a bell does not link with the newly added pod villager, the stacking has not worked. The villager is either part of the second village or something else happened. -ALWAYS ALWAYS ALWAYS create a creative copy for every village you stack. Texture packs: -I used the On-Screen-Compass-Clock (oscc) texture pack from MCPEDL, it helped me know when to start stacking. If the day is in the centre/middle point of the clock, it just became day. You can also use villagers sleeping as an indicator when to start. -I also used the Utility HUD by Ambient from MCPEDL, it shows chunk borders when in third person view with an item in offhand. I am planning to build Rocket Builder's 24 stacked raid farm storage, and change the Trident killer to the P.M.A outpost trident killer on the Bedrock Archive discord server, which has an advertised 420 bad omen/hr. Also, I would burn all my xp, as the world download showed how laggy it was. Good Luck Stacking! Update: I added a exp water filter at the kill platform to reduce lag. The exp floats to the top and gets burnt by lava, while the items flow down to the bottom. I have also added one more glass layer on top of the existing glass because ravagers can somehow break the leaves and ruin the farm.

@KRUKONKING_THE_GOD

Жыл бұрын

This information helps out alot .I'm having issues stacking my 2nd villager linking with workstation to the pod villager.ill keep at it an try again

@KRUKONKING_THE_GOD

Жыл бұрын

I'm having issues now with the villagers not linking up to the first bell you place down by the portal as you bring them in.ive placed the bell in multiple places within that small area it's still not linking to villagers .killed off the villagers then started again an still no linking to bell any suggestions?

@lewis4283

Жыл бұрын

@@KRUKONKING_THE_GOD so you placed a bell for the 2 villagers to link at the portal correct? Only thing I can think of is that they are not linked to a bed. I would place 2 beds in the starting square, then place the bell, let them link (green particles) break it, then inch worm the 2 villagers one bed at a time.

@KRUKONKING_THE_GOD

Жыл бұрын

As soon as the 2 villagers come threw the portal.both of them link to there beds they sleep .but once I place the bell down after they link to bed they don't link to the bell.

@lewis4283

Жыл бұрын

@@KRUKONKING_THE_GODAre they already linked to a different village? How far is the portal from the villager pods?

think this may be potentially broken if youre trying to build it in the most recent patch, as the villagers who go through the portal link with the first village (tried this at least 6 times and spent about 4/5 hours troubleshooting before giving up) and villagers will randomly change village at will when stacking

@seasickrhino8926

Жыл бұрын

It worked for me! Were you unloading the chunks while you had villagers in an incomplete village, or exit the game during a village transport? Did you not wait for the villagers to link to a bed before setting things up? I found that both of these issues caused this, and may be what has caused your problem.

@Gearloe

Жыл бұрын

@@seasickrhino8926 I got it done in the end with 2 rows, but 3 of them failed. Oh well it’s being shared between 3 players so that’s enough raids for us anyway! I custom built the storage and filters with allays and I’m happy with how it came out

@seasickrhino8926

Жыл бұрын

@@Gearloe congratulations! I’m glad you made it work. I haven’t built a storage system yet, but at very excited to make it happen.

@sarchlalaith8836

Жыл бұрын

The portal need to be 100+ blocks away from the nearest village

@Gearloe

Жыл бұрын

@@seasickrhino8926 I know this is an older comment but i made a huge over the top sorter underground with 4x speed item filters, alleys for totems and books and 4 double chests for each item. looks coo, but it took so much to build!

Heya whisperer, downloaded the world and tested it as intended. I'm getting an average of about 1-2 raids per minute and I'm only getting to about 12 stacks before I start getting Hero of the village, is this a know thing? I've used command block to instantly kill all the ravagers since the farm is not built for them.

Just a question, would this farm work on a realm? I am currently playing in one and i would love to build this.

Any tips on getting the second village beds in place? When I'm trying to get the final bed in the correct place, villager NEVER links to it (2 away from the other one) but will happily link to one 3 blocks away usually

@gingercraftman

Жыл бұрын

Having the same problem

@RaythMinecraft

Жыл бұрын

@Curtis Irvine I actually worked this out. To start the extra villages need to come from a side not behind or in front, And then I spent time fiddling the beds until villager linked

@gingercraftman

Жыл бұрын

@@RaythMinecraft Nice, thanks!

As far as the leveling process goes, do you have to build up the areas that are beneath the outpost? Or rather beneath the 2 blocks beneath the outpost?

@aiwanchu3719

Жыл бұрын

You don't need to level, the raid spawns in 128x32x128 with the village at the center. I suggest to spawn proof the area from raids using only leaves or scaffolding. I covered the small mountain under my farm with leaves counting atleast 16 blocks from the lowest bed and the raid spawned in the correct area. Tested it a few times.

@aiwanchu3719

Жыл бұрын

Also the outpost is just a bad omen farm. No matter the height, you just need the outpost to be within the spawning sphere and the villagers to be loaded. But from the villager to the work station follow the chunk alligning. The village should not be within the same chunk as the outpost.

@nicholassteel1471

Жыл бұрын

@@aiwanchu3719Okay all of that makes sense. Thanks. I did level everything around the outpost already though. I went about 30 blocks in each direction from the outpost and leveled it to two blocks beneath the outpost bottom block. That should be good right?

@aiwanchu3719

Жыл бұрын

@@nicholassteel1471 no, the spawn proofing should be done 128x32x128 around the village you make counting 64 blocks to the side using leaves or scaffolding only. But if there are no spawnable blocks in that range it's good too It's best to just test first in creative copy.

@nicholassteel1471

Жыл бұрын

@@aiwanchu3719 so if I cover the area I didn't level with leaves to get that 64 blocks around the village, then that'll work?

Hey silent, just got done with my 3rd village and all the new villagers I bring though link to the last ones bell, does my bridge need extended or..

IMPORTANT INFO!! I’m commenting here after finally finishing 8 villages and just starting my second row. I found it next to impossible to do the villager moving in ten minutes during night. And due to that eventually giving up for some time. Now after coming back and playing with it in creative, a very consistent way that I found (maybe others here found it before me lol) was to use railroad on the whole thing, following the same thing silent said moving beds every “10-15 blocks”. As a step by step I would do the following: - place minecarts outside of portal - get villagers from nether to said minecarts - once they are in the minecarts place two beds then the bell find the leader. - then before I had started this whole thing I preset stations every 15 blocks on the pathway where I would put 2 beds. So during the process of moving 2 villagers at once I would be using 4 beds. - so I would have the two beds in front of villagers then I would go place the other 2 beds 15 blocks away. Then go back and move the villagers via railway to the new beds. Break the original beds then make sure they link. Rinse repeat. If you guys want I can describe how I did the single villager moving across the entire farm as well :)

@NBAFAN100

Ай бұрын

If you could help me with stacking the villages that would be great Just send me a friend request and join me, my gamertag is Drago4778