No video
Milwaukee M18 Hammer Drill Chuck and Screw Replacement 42-66-1006 05-88-0019 2704-20 18v 18 volt
Only a few days after my Milwaukee warranty had expired, my chuck failed. I called Milwaukee and they would not make any accommodations. They did however sent me a parts diagram so I could buy the parts and repair myself. This is how I repaired my drill. I had no idea what I was doing and I learned as I went... As you will see...
Пікірлер: 62
I like the way you are. Not to be afraid to admit that you are wrong. Your video teaches a lot of people how to replace the drill chucks.
@kevinon4wheels
2 жыл бұрын
Thanks!
Tha ks for the great tips. I recon you saved me from having an Airborne drill flying out the door. Could do the job on 5 minutes with no broken toolsor lost tempers. And the wife is happy!
@kevinon4wheels
Жыл бұрын
You’re very welcome!
Thank you so much for posting this. Its the only Video i found about the Milwaukee Chuck replacement. The Torx 40 comment was exactly what i needed. my screw was so filthy i couldnt recognize that.
@kevinon4wheels
3 жыл бұрын
You’re welcome! And it’s reversed threaded!! Ha ha
This was painful to watch! He says "I don't know what to do from here" uh...you should have done your homework and found out it is reverse thread! It would have saved you all those broken bits.
That was so funny . And reading the comments was even better
@kevinon4wheels
2 жыл бұрын
I should delete this video so my children don’t see it
I thought to take out or open up the screw inside, u hv to twist clockwise. Reverse way to open
❤ Painful to watch from 3:20 till your own revelation 👍😎✊
why are you going lefty loosy with the torx screw ? isnt it righty loosy type
@gabrielbronner6800
3 жыл бұрын
the left threaded is opened to the right ;-)
I was going to change mine out today but I don’t have a T40 bit. Got every other size Torx but that one lol 😂
@kevinon4wheels
11 ай бұрын
Ha ha. I hope you found one! Most big box auto part stores have free tool rentals
@tannerwest6823
11 ай бұрын
@@kevinon4wheels yea all good I bought a bit at Home Depot
Definition of insanity right here.
還好有此影片,讓我把拆不下來的夾頭給拆下來;1 先用噴火槍將夾頭內的螺絲燒一分鐘,2 用T40星型螺絲起子以順時鐘方向退出,3 像影片中用夾頭夾著L型內六角扳手以逆時鐘方向轉下夾頭。
Soldering iron a good option to break the loctite in the chuck screw
@kevinon4wheels
2 жыл бұрын
Great tip!
Poor drill, fell sorry for it!!! painful
Left handed thread
@kevinon4wheels
2 жыл бұрын
Thankfully my 5 year old daughter came out and showed me how to use my tools. She’s a real life saver!
i have same thing with a 3/4" version m12 hammer drill driver, bought i just a year ago. Used perhaps 3-4 times. Sometimes it rattles when i try to loosen it when it have not tightened it enough. Kind a weird after hardly any usage. Honder what ive been doing worng to get parts in there sort of grinded off. I it by drill power first bit, then tighten it by hand
@RomboutVersluijs
3 жыл бұрын
Weird thing is the manual even states it. But it did not do this when i just got it and after first couple of uses "A ratcheting sound may be heard when the chuck is opened or closed. This noise is part of the locking feature, and does not indicate a problem with the chuck’s operation."
@kevinon4wheels
3 жыл бұрын
That's disappointing. They usually make a really quality product. I don't think you're doing anything wrong. If anything the bit would just spin. If it is under 5 years old, there's a no receipt required warranty.
@RomboutVersluijs
3 жыл бұрын
@@kevinon4wheels Well the thing is, i dont have any issues with the bits. Perhaps i got loose one time, but that was when i tried to drill concrete and did not tighten it down enough. I think i pass by that shop and ask them. See what they think of it. Thank for the reply!
@RomboutVersluijs
3 жыл бұрын
@@kevinon4wheels PS kinda weird they dont state in their manual about that counterclock screw. I already had find this and tried if this perhaps solved anything, it doesnt change anythong for me. I was also thinking because the manually actualyl states it can make a ratcheting sound it perhaps is normal. It seems to be a ratcheting lock mechanis after i did lots of research on these things. I do wonder why it did not do that in the beginning. so i guess a visite to the shop will get people to look at it which have experience
The ROHM chuck its better man 😂😂😂
so basically what I learned here is - i'll try the breaker bar... And the drill can take a lot more abuse than I thought it could. So I guess that's good... Why that screw had to be that tight I will never know. I just don't want to break something or myself getting it off.
@kevinon4wheels
2 жыл бұрын
That bolt took an ass whipping. Who would have thunk it was reverse threaded? Ha ga
@mikesavad
2 жыл бұрын
@@kevinon4wheels it makes sense that something is needed to counter forward and backward. But still that thing is in like iron. Not even the impact moved it.
@kevinon4wheels
2 жыл бұрын
@@mikesavad I’ve heard a lot of people have issues with that
30$ of t40 bites later. Oh! I wasn't turning it the right way. Lol. Been there
@kevinon4wheels
2 жыл бұрын
😂😂😂 my daughter confiscated my tools after watching this
Drill: more novocaine pleeeeeeaaasse!!! Garage Dentist: novocaine sooo overrated!
@kevinon4wheels
3 жыл бұрын
Ha ha ha ha
Maybe you should watch u tube videos before you show someone how to do it wrong , the screw is left hand thread
@kevinon4wheels
2 жыл бұрын
KZread suspended me for a year because of this video
@kevinon4wheels
2 жыл бұрын
Did you skip to minute 13 or watch the whole thing?
Mr Bean... left threaded
@marcwilliams1053
2 жыл бұрын
Left handed thread
screw that i had this happen to 2 of these// i just bought new ones
@kevinon4wheels
3 жыл бұрын
My Milwaukee impact driver that came with this set died at the same time. I needed a new trigger. It was more expensive to buy the part than an entire new driver.
whats the part that the chuck screws on. mine keep falling off
@kevinon4wheels
Жыл бұрын
www.ebay.com/itm/182433322931?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=0j3omS50S-a&sssrc=2349624&ssuid=-dfhctALSdG&var=&widget_ver=artemis&media=COPY
@kevinon4wheels
Жыл бұрын
I’m not sure but this is where I bought the part. He may be able to get it for you
用冲击螺丝刀砸两下再拆,几下就松动了
Another min of map gas wow y didn't I think of that. Smh
@kevinon4wheels
3 жыл бұрын
My parents are ashamed of me
hahahahaha classic
@kevinon4wheels
3 жыл бұрын
face palm
Lol x 100
@kevinon4wheels
3 жыл бұрын
*face palm*
Lol ouch 🤕
@kevinon4wheels
3 жыл бұрын
My pride was in the tank. Haha
Some ppl shouldn't be allowed to use tools
@kevinon4wheels
3 жыл бұрын
My wife locked them up so I can’t use them anymore
Penetrating oil works wonders
@josephcoffman2441
Жыл бұрын
Nonsense!
BUY A NEW ONE....THATS IT.....
@kevinon4wheels
3 жыл бұрын
I couldn’t afford one at the time so this was the better option for my budget