280 here, still not mov'in🤣 Who'd a thought watching a truck alignment shop channel could be entertaining? Keep up the good work.

Great video. Shows the strength of these battery powered impact guns. Like you said, "Use a torque wrench".

They say when you get haters on KZread , You officially made it . Congratulations my brother!

I love your sarcasm, great video. Thank you.! I’m glad to see they’re still a few men left in this world.

The 275 comment had me crying lmao! Those impact guns are no joke! We use them for everything.

wow those things can crank out some torque ,I used to do car chassis straightening ,Retired now.Man truck stuff is heavy work . Cheers from Australia

I actually did not know you could get so much torque on these small settings. Excellent demonstration! Thank you.

Ive had the same Snapon 3/8, 1/2 impacts and same batteries for 8 years. Still work flawless and hold a great charge. Never would have thought they would last this long.

Appreciate the videos, new to the industry and need all the information I can get since my company provides almost no training

i really like the Spanish and English closed captions im learning Spanish and this is muy bueno

U can’t be worried about these people who mad about there own life turned out.i am for one who enjoys watching ur channel . And also enjoy watching u away from work . Keep up the great videos

The only ones that cry about torque values are the ones that never pulled a wrench ,I work with heavy equipment and that Milwaukee impact is incredible for what it can do . And for taking off wheel nuts on semi trucks on the road when you don't have air tools this thing is amazing .They are a bit pricey but worth it .

Well said Devin, I don't get the haters on video's, life is to bloody short for that shit.

Torque test channel is a good channel for that, they built a dyno and shit for it, and they have a list of all of it too, if this isnt enough for them then recommend them that

If this guy sits next to you at the bar, buy him a beer.

I'll agree that snap on puts out more power, but it can't be used in the rain without frying it. And price for price Milwaukee gets my business every time

Bendon’s gettin’ a little bent outta shape! I love it! Gotta remember, most of these armchair mechanics couldn’t trouble shoot a light that’s not working! If it’s not something obvious like a bulb, fuse or broken wire, they’re lost. Give them a problem with voltage drop, or a bad ground and they just give up.

I am 110mg of edibles into my Sunday morning, and this is how i start my day. 😂

Just because my mom cooks all my meals, does all my laundry and does it all for free does not mean I have to live in the basement. I live on the 1st floor thank you.

@caleblambert64

4 ай бұрын

Amen brother!

@MrHeHim

3 ай бұрын

🙏🥲🙏

@josephbradshaw5353

3 ай бұрын

Don’t lie you live under the porch because your mom’s mobile home doesn’t have enough room for you because it’s a single bedroom home 😂

@MR-si1eq

2 ай бұрын

​@@josephbradshaw5353😂😅😂😅

@MR-si1eq

2 ай бұрын

😂😅😂😅

You are so, entertaining! You are a rare sort, you actually use your head, besides something that just keeps your ears from touching each other!

I really hate that you have to put up with STUPID but you handle it well. I love your videos and your commits.

@cupwalker24.7

4 ай бұрын

What is the definition of stupid now days 😂 ? I think we all are .....since We go work hard as hell and give all our money away to strangers for taxes . Instead of spending time with family getting paid every dime for our skilled trades 💪🙏

As soon as Mommy lets me out of the basement, I am going to get one of those Milwaukee thingys. LOL, best tool review video on the internet. Thanks for bringing humor to my day. Also, thank you for the videos, learning alot about something I never knew about. Please keep them coming.

Good stuff man.keep em coming.

Thank you for putting the Spanish subtitles! I can share this with my coworkers.

When you have a experienced mechanic that don’t mind showing you ways of doing shit me personally I listen soak it all in others don’t see that way.ima diesel mechanic 7yrs and I come across people all the time that think they know it all are trolling type people but this dude is a hell of dude and machanic some people need get off this man’s nuts and learn something!!

Thank you for this great content. You are greatly appreciated sir. 🎉👍👍

I like these taught in America Videos!💯🇺🇸

Well done. Love the video and the way you dismissed the internet trolls is amazing. Again well done and look forward to move videos!

You are great make more video’s they are pure entertainment.Don’t waste your time with fake mechanic comments those who write them probably can’t fix a wheel barrow

I was born in the Great State of Texas but was asked to leave because not man enough. You are the man.

My 2 biggest complaint with battery powered tools such as nut runners (cordless ratchet) and impact guns is Batteries always seem to die at the most inconvenient time, as well as they are a consumable item i.e. They need to be replaced after x amount of time/recharge cycles and that the motors in these tools wear rather quickly and loose strength. Don’t get wrong when I ran service calls I liked there convenience but in a shop setting I much preferred my air tools which range in age between 5 to 50 years old. That said if you like them use them but just be aware that they are far more expensive than air tools

Most of us appreciate U❤

torque wrench was a paid actor

I don't what the issue is I own the same impact, greatest tool I ever bought, use damn near every day

Great job brother !

Good stuff, Bender!

hope bob was not under the weather when you filmed this but he did make apperance at the end

Had no idea these these made that much torque... we had one at a power equipment shop i used to work at and it would knock blade bolts off on the big commercial riders that my IR 231 wouldn't even budge

Great stuff bro

This trilling the trills had me laughing the whole time. Great job.

@$#$@# now you're on DIAPER DUTY... like the brother said, if you don't like the video SCROLL ON. NEWEST COFFEE MUG: SCROLL ON GREAT VIDEOS BROTHER

We got hilti rattle guns at work, maxs out putting screwbolts into concrete at 750-800n.

@lukebrennan5780

4 ай бұрын

woo! that's pretty impressive. (OK, to me, anyway!) that's circa 590 ft/lb.

Lmao!! Absolutely loved your opening commentary!

Using a torque wrench is very satisfying.

Anyone who has put a torque wrench on a lug nuts knows their impact torque. I have done the same thing as this however I did the reverse, tried to loosen it with the torque wrench.

I’m loving it!!!

Do what you do! Sorry, no subtitles available...

I'm sorry you got trolls you're a good guy and from what you allow people to see here on your channel you seem to be a very well knowledgeable honest truck mechanic and I have to believe you you're from Missouri and you're showing us you need to get Bob to point at it they'll believe you then but I believe you even if Bob don't point at it don't let the trolls get you they're probably just mad because they burned their tongue on Hot Pocket and stub their fingers on a keyboard and got a hangnail don't let them bother you

It looks like it fit perfectly fine within your grasp of doing the job.

Keep on Bendin Bro…great video 👍🏻!

I work for a large ag equipment dealer and set 400+ hp tractors up for farmers weekly. All i use is Milwaukee 1/2 impacts. The book says 450ft#'s. Well let's just say I don't need a torque wrench. Its obvious you good when the bolts are flaking off as i tighten them up.

@kadmow

3 ай бұрын

- ugga ddugg to tighten and arc-tack to maintain... ha ha...

Keep On Keepin On👍🏻

Esta chingon que le pusieron los subtítulos en español

That's funny as hell!!! Thanks Devin!!! LOL!!!!

Setting 2 with a torque limiting extension comes in under the rating. Setting 3 pushes past it. I use number 2 with the stick followed by a torque wrench. (though the biggest things I see are only 3500 duallys)

That’s a lot higher then I thought it was on the first setting. I had a jaguar complain that I over torqued his lug nuts. The shop had trouble getting them off. I used the first and second setting. When the complaint came in. I said I could of the gun does have a lot of torque. But if it’s a one of two Jaguars in the province I have to question why he took it to Costco. When it had a full size matching rim for the spare. All he has to do was fix the flat tire and put it back in the trunk. Now I used torque sticks. 65 pounds first tighten then drop the vehicle and do the final. My sticks go up to 150 pounds. I also purchased the cover for mine cause it’s in my bag or outdoors with me.

Fantastic thanks again for the truth 😊

Thing I noticed with electric impacts the socket jumps off the fastner under higher torque usage

Awesome

I use 3rd setting with a torque bar so I don't go past 475 on my lug nuts. Then I check with torque wrench and haven't had any move at 475 on wrench. Got tired of replacing studs stripped out by over zealous tire guys.

I have the same impact. I always give lugs about 1/2 second of ugga dugga. Ive never had a tire fall off, or damaged a stud.

I wish my m12 Milwaukee insider was as good as my M18 1/2” 2767 impact. No bolts or nuts can resist the impact. The insider had to go in for warranty after 30 days of use. They said the spine service assembly, and the yolk service assembly were worn. I paid less for the impact and it eats.

Just do it up till its strips then back off 1/2 a turn perfect torque setting achived

I like your videos. But why are you calling me overweight 😂. Keep up the the great content.

I have the Milwaukee Impact, and I have yet to find a nut or bolt it can’t remove.

I need a split beam 3/4 tourqe wrench.

"If not get hearing aids" lmfao 😆

Looks like the old vice has had better days but it's still in use 👍

I love the shit talk as you give a good demo. Made my morning!

I run car lug nuts on with an m12 hex impact with 1/2" adapter. Then, a half turn with the torque wrench yive or take put them at 90 foot longs with mustard.

heard it :) .... so long as it breaks em loose .. I have the dewalt system for most of my tools ..as long as it dont break and dont lose you money its all good

They wanna spend money instead of getting there axles trimmed Hey dont listen to the man who does the work

@joelbrown3479

4 ай бұрын

BRILLIANT 😎 👏 😎 👏 ARMCHAIR IDIOTS

I love all my Milwaukee tools from my 1/4 inch driver up to 1 inch impact and a lot of other in between drills and what not….I don’t buy anything cordless from the tool trucks anymore.

I like the Milwaukee impacts. I have a set in my race trailer. In the shop I have the brushless 1/2 - 3/8 - 1/4 Matco 20V+ 5.0 set and the 1/2 has 1600 ft lbs of breakaway tq and it's more than I need most of the time. Keep up with the great and funny content.

Let em have it. !

Thats all good and well but what does Bob have to say about all that? I need one of those red thingamajiggers!

You don't go by torque. You just count how many ugga duggas. Always tighten till the bolt snaps and then back off 1/4 turn.

I got the big dog one inch Milwaukee 1800 foot-pounds in reverse. It will change all 18 wheels on a semi No compressor no big air hose. Over a 1000 bucks with Is the big battery A way cheaper and a compressor and an air hose And a big pneumatic. Great in the field.

i would jump by 100 and then loosen and retest but my mama said you do it right and then test on the 50's like 200 300 400 and see if she gives then loosen and do 150 250 350 450 and she where she gives the torque wrench is the best tool for the job and you know your job and 400 is where im at go big and deep great job on not loosening it to see where she is at at loosing torque is less then tightening : ) have a wonerfricken tear-less day and keep the rubber side down

Don't most electric torque gun experts live with momma?

Hahaha frustrated like your dad in the middle of the night .

"Kinda frustrated like your dad when he couldnt get one over you at night" lmfaooooooooo😆 damn

Wow... Milwaukee dont mess around....i was doing to get a dewalt,but after seeing this....ill spend the extra money on a Milwaukee

@jamesray9009

4 ай бұрын

if you end up with Dewalt, get the hog ring not the detent ball anvil the detent ball one breaks itself apart at the ball.. :)

Yo, I was wondering if Bob can come outside to play?

That’s bad ass

Keyboard warrior's vs real man of his trade. Keyboard warrior's defeated by simple logic as usual.

You really notice over torqued wheels on stuff with taper seat lug nuts when they bury the nut into the wheel

Love trolling the trolls !

Don't let em get to you until they prove that they do what you do everyday.

Everyone knows. You tighten the first one till it breaks off. Then the others you tighten a little less.

@brandonerhardt4905

4 ай бұрын

Tighten it until it gets loose, then back off 1/2 turn.

i love the feistiness 😂

It's not you dad lmfao. Ur great brother.

What's the context here that he is doing a torque test??? Love my milwaukee stuff, had no idea the high torque would give that many beans in the first setting

@Repulsive_100

4 ай бұрын

Context matters For a moment i thought he was mad at me. 😂

Do you have a part number for that torque Wrench Mr. Bendin ? I plan on saving up for several months for one ..

@coltonjones5968

4 ай бұрын

Looks like TQE600E, they’re 1,165$

@cameronduff884

4 ай бұрын

...think it's made by Precision Instruments, just you won't get a Snap-on ratchet head, but you might get one with a breaker bar included, warranty is another thing to consider, some tool vendors can repair tools (especially ratchets) on the spot 😊.

@thomasworrell6853

3 ай бұрын

1100 dollar breaker bar.

@cupwalker24.7

3 ай бұрын

@@thomasworrell6853 German torque specs . Goooodintight

I feel attacked 😂😂😂

👍😊

so just one ugga dugga at the lowest setting when installing the oil drain plug

0:45 lol... I can't stop laughing

I’m buying this gun lol

😂 hilarious commentary