It's always great to see a new video from you. Having the cutting parameters visible during the whole cut is excellent. Also the sound is great!

@BavariaCNC

2 жыл бұрын

thank you!

I wish there would be more Videos like this, its just so satisfying

@BavariaCNC

2 жыл бұрын

Thank you that’s great to hear :)

@kw2519

2 жыл бұрын

These videos work because this guy knows his machine and his speeds and feeds.

I really enjoy seeing the Imperial listing of parameters in this video :) . Good chips :D

Very fun to watch!

Love watching your vids, please keep doing these 👍

@BavariaCNC

2 жыл бұрын

Thank you, Rob! I try to keep on regularly as good as I can :)

Absolutely love your videos. I find it super informative and entertaining. Also pretty sure we're going to see some slitting saw action in every vid!

@MrRctintin

2 жыл бұрын

Exactly! I must get a slitting saw for my mill.

@BavariaCNC

2 жыл бұрын

thank you :) I love my slitting saws :) I probably need to make video just about them ones :)))

@MrRctintin

2 жыл бұрын

@@BavariaCNC yes please. I’ve never used one, so a guide to different ones, HSS, Carbide, Etc would be great.

@BavariaCNC

2 жыл бұрын

@@MrRctintin I think I will :))

Moin, Endlich mal Kunststoff fräsen. Da ich selber seit Jahren Kunststoffe fräse finde ich das echt interessant. Hast du für POM mal Einschneider probiert? Die sind vor allem für weichere Kunststoffe (POM, PE oder PP) echt genial. Gerne mehr Videos.

@BavariaCNC

2 жыл бұрын

Danke dir! ich mach zu wenig Pom um mir dafür Wekzeug zu holen, aber ich geb dir recht das die Einschneider eigentlich ideal dafür sind, stabil und viel Spanraum!

You are alive! 😃 Great to see you back posting longer videos. I love info bar! That's the thing that most videos on YT miss. How did you managed to capture data of spindle load and RPM live? Ho is it done? However I have one suggestion about it. It gets quite confusing at first with dots and commas. I took me a while to realize that it's not 2m/s Vc on facemilling 😅 I'd give up dots on thousands and leve just commas. It may also be hard to find a difference on smaller screens.

@BavariaCNC

2 жыл бұрын

Thank you :) The infbar is capurted with a VNC connection. I agree with phones and small screens. Mhh I will have to think about that problem.

thank you for another great video, that end mill is impressive

Machining POM is always very nice and satisfying

Love the info box!

@BavariaCNC

2 жыл бұрын

Thank you for the feedback!

Please keep your channel going ! I love your content ❣️

nicer with the infobox i like it

@BavariaCNC

2 жыл бұрын

Thank you Hans! 👌

As others have noted, your videos are extremely well produced. Looks very professional =)

@BavariaCNC

2 жыл бұрын

Thank you man :)

So cool 🙌🙌

@BavariaCNC

2 жыл бұрын

Thank you Mark :)

Super Video gerne mehr

@BavariaCNC

2 жыл бұрын

Ich versuch dran zu bleiben =)

I am not a CAM guy, but I really lied the idea of having a saw make a huge undercut to remove the part easily with a simple rotation! Great job.

@BavariaCNC

2 жыл бұрын

Yes it is a pretty handy solution

Nice, didn't expect the surface finish after the facemill.

Awesome videos keep up the great work!

@BavariaCNC

2 жыл бұрын

Thank you! I will do :)

Nice work! Delrin is so fun to cut!

@BavariaCNC

2 жыл бұрын

Thank you! just no fun to clean :)

Wieder ein top video :) Ich mag diese ungekürzten, kompletten Bearbeitungsvideos. Da lernt man auch was beim zusehen. Zum drehen bzw. fräsen liebe ich POM ja, aber zum sauber machen (vor allem nach Fräsarbeiten) ist es der absolute Horror.

@BavariaCNC

2 жыл бұрын

Danke dir! Ja du findest in der Maschine noch ne Woche später an den unmöglichsten Stellen den Mist :)

thanks for the new video :)

@BavariaCNC

2 жыл бұрын

Your welcome :)

So good : D

@BavariaCNC

2 жыл бұрын

thank you :)

Awesome

@BavariaCNC

2 жыл бұрын

thank you!

Shockingly good content mate. Miss the videos of the more complicated stuff though.,

@BavariaCNC

2 жыл бұрын

thank you! I hope to bring on more content and there will be much more complex parts too :)

I love watching the load meter! would be nice to see the tourqe required for the tool too!

Great video! I like the new box, but on mobile it’s hard/impossible to read some of it.

i glab mit dir zu arbeiten wär hoid so ein Traum🐐

@BavariaCNC

2 жыл бұрын

Mei Frau sieht das immer anders :)))))

i give you a tip when u will cuting to part t slot cutter make big arc line after cuting this line parts its will be a bit strong, and dont move.

Schade, dass du so weit weg wohnst, ich würde für dich arbeiten 🤣

good video bavaria cnc

@BavariaCNC

2 жыл бұрын

Thank you!!

👍 für den Algorithmus

Nice video. I like the filmed rpm and feed edited in. Is that the fz you'd use with the slitting saw in aluminium?

@BavariaCNC

2 жыл бұрын

Thank you! no I used a slower fz as I was not sure how it will perform in Delrin or if there will be weird things happening with the chips :)

Moin von der Küste! Great video again, like the new info box.

@BavariaCNC

2 жыл бұрын

Moin moin! Vielen lieben Dank :)

Vorweg wie immer sehr schönes Video und die Schnittdaten sind immer super interessant für mich . Mich würde jedoch interessieren, warum das Teil gefräst wird und nicht als Spritzgußteil hergestellt wird.

@BavariaCNC

2 жыл бұрын

Vielen Dank :) die Teile sind für ein privat Projekt und ich brauche nur 5 :))

@hillbill3502

2 жыл бұрын

@@BavariaCNC ok klar dann macht das natürlich Sinn😅

I've been watching you since your very first video. There's so many KZreadrs who cover CNC but you my friend really stand out. You will end up at 100K or 1Million for sure! I recently uploaded some old videos from over the years if you wanted to check them out. One day I hope to get to the level of video editing you got going on!🤣 ✌️🇺🇸

@BavariaCNC

2 жыл бұрын

Thanks a lot man! right now Im happy reaching 10 K and just keep on filming you will see progress in editing comes by doing it :)))

Ist da Aufwand das Teil zu zeichnen, programmieren und fräsen + Materialkosten nicht viel größer, als bei Item in den Shop zum geh und sich a Packerl von die Deckel zu bestellen?

@BavariaCNC

2 жыл бұрын

ganz nüchtern betrachtet wahrscheinlich ja. Aber da drückt der Schwabe in mir durch :) Das Material war als Abfallmaterial da und zeichnen und programmieren ist bei dem Teil jetzt kein Aufwand also hab ich Sie gefräst und sind natürlich jetzt viel toller wie Originalen

Produzierst du die Kappen für dich oder für einen Kunden? und wenn du sie für einen Kunden produzierst; wieviele musst du pro Stunde raushauen um daran nennenswert zu verdienen?

@BavariaCNC

2 жыл бұрын

Die sind für mich selber ;) so wäre das hartes Brot :))

@ipadize

2 жыл бұрын

für Massenware wird sowas mit Spritzguss hergestellt.

@YouCollect

2 жыл бұрын

@@ipadize Ist mir bewusst. deswegen meine Frage

Hello, please can you tell me why you like in Garant product (mill) ? I was using Yg-1 in my last Job and the price was correct for the tools. I'm looking to create my shop so I made research. Thanks by advance, nice video as always ! Bye !

@BavariaCNC

2 жыл бұрын

Hi, I think in Pro Tools its more the complete package you have to look at the "just" see the endmill. So for me the service, the application engineer and the delivery of hoffmann counts as much as the tool performance. and at least for me this is a perfect match for my company and my work.

@n00byWan

2 жыл бұрын

​@@BavariaCNC Hey, thanks for the answer i understand about the "package". My actual boss is buying tons of different brand and it's a nightmare. Good continuation !

@BavariaCNC

2 жыл бұрын

@@n00byWan I did that in the beginning and I always both either the top top one article of each brand or the cheapest. Ended on a mess now instay with one. May only get always top and rarely top top but to be honest always top is much better on an overall perspective

69ter like :)

@BavariaCNC

2 жыл бұрын

🤣🤣🤣🤣

i do not like it , you could just try the fit before you part it off. and iam think what machine you have, you could do more challenge cut pass than this kindergarden machining, anyway i like how you try to use your knowlege to make it more reasonable for others. But for experienced owners of machine shops this is just waste of time. yes sorry i forgot you could debur it in machine it can took like 20 sec max. to debur everything before parting of. Have a nice day.

Awesome