Welcome back TKSJa, I believe your MikroTik videos are really invaluable to home users and I know that many people have missed your content! I look forward to seeing anything new that you create!

@grindstone6833

2 жыл бұрын

i learn from you too i love how you guys just make it simple for me thanks gents all the way from SA .

@mikkio5371

Жыл бұрын

this is another of my boss. i learnt alot from you

This is EXACTLY what I was trying to do with an older Mikrotik router I was using in the past. You are the MAN!

Thank you for showing this, I was about to return my hap ac3, couldn't wrap my head with all the instructions until I found your vid.

Thank you for clear and concise videos. It always helps me out a lot.

Thank you very much for this video! I just configured my old Mikrotik as a repeater with Ethernet ports, now I am able to connect my CCTV camera remotely!

Great video, thanks a lot for sharing it, I've followed step by step your instructions and it worked great.

THNKS ALOT SIR. I'M VERY HAPPY TO HAVE YOU AS MY TUTOR.

welcome back!! thank you so much for continuing to support the Mikrotik community with your videos! would you be able to do a video on how to create a span port to allow for a device to packet capture for security usecases

am from Cameroon, really thanks and Super Good Job dude. You're the KING

Thank you! The only guide that did work for me

dude you are the man !! thanks for the detailed tutorials !!

Thanks a lot! I'm totally a beginner but i reached my aim successfully 💪

Im glad your back. . .

Thank you very much. Everything worked perfectly

Welcome back! Missed your tutorials. Would it be interesting for you to make a tutorial for advanced firewall configuration? Like the one you already have + DDoS and DoS protection? I know much people would be very grateful.

Thank you man, you're amazing

Super useful, thanks! Very straightforward and thanks for explaining why each step is necessary.

insightful tutorial, thanks!

welcome back man

Welcome back man. Please do a video on aggregating 2 WAN links with BGP…. Not a failover, just having 2 WAN links working side by side

Eres un crack amigo gracias

Thank you so much man.... 😊😊😊😊

Thank you so much!

Good video.

great，respect from China

@TKSJa

2 жыл бұрын

You are welcome!

Missing your videos for 7.** !

So I'm havi g a bit of an issue. When I get to adding in a DHCP Client, it doesn't create its own IP address. It stays blank. And status stays as searching... I have no clue why or how to correct it. Please help

Thanks for your illustrative video. I was wondering what else would I need to do to add the option to make my Mikrotik bond 2 connections (a wireless wifi and a physical ethernet)

Hi. Nice video. I've done all the steps - All is fine until I try to add the IP DHCP Client - it doesn't receive any IPs. DO you know what would be the cause?

Well done for the great video, I have configured the same as your configuration, I just want to make sure, how can I know that it's working and people use the repeater? thanks

Thanks for your video on wifi repeater, everything works for me. But I have one question, would it be possible on the Mikrotik repeater to establish a VPN to Nordvpn, so that all the traffic that goes through the repeater via the NordVPN connection? I have already established the connection via IKEv2 to NordVPN, but how do I route the repeater traffic over it?

There's a good button on the right panel as "Setup Repeater", you can set up it much simpler...

I just wonder if it would be possible to enable remote VPN access too with this setup. The VPN setup is visible only under Quick Set under Home AP, but whenever I will change to Home AP to configure VPN, then it would mess up the wifi extender setup right away. I haven't found any other place to configure this VPN access.

thanks for your videos is possible to add not wired router to capsman?

thanks, there is a button in setings: "Setup repeater" isn't easier for the beginers who are not used before mikrotik?

Is this possible with CAPSMAN, using the wireless connection as the backbone and the virtual as the being controlled by CAPSMAN

Cool video!! Could you please advice what is the easiest way to configure the MikroTik repeater for a new wifi provider/connection (change SSID and password)? Thanks.

Can you do a ptp video with ospf on both sides

Hi can you teach us more about userman version 7 ?

Hello, thank you for your good tutorials. Please, if possible, put a tutorial on rejecting WhatsApp, KZread, Instagram and Twitter traffic from VPN in Mikrotik along with the configs. Thank you.

Hi, I cannot set Interface all for bridge any clue why?

When I reset and reboot it takes away my default gateway how do I fix?

if i set to station bridge its not working, but when i set to ap bridge its working im so confuse

hi please do you have virtual classes one can enroll with you . thanks for the services so far

hi . i do all steps and connect mikrotik router to my Huawei LTE router but no internet in my mikrotik router and the status of bridge is just searching

Hello can you make a guide to setup wireguard in mikrotik please

Hey bro this video just gained you a sub! I wanted to ask one question. I used this method to extend my wifi coverage, however the speeds isnt great so I was wondering if I cant just hook up a lan cable from my Tenda router directly to the mikrotik router if it would be a better solution . Do I need to change anything in the configurations?

@jefftee448

2 жыл бұрын

Yes, wired is always preferred over wifi

How do i connect other wireless access points to my router? My router DOES NOT HAVE WIFI. It has no wifi capabilities. But I have other devices: Zyxel Access points which I connect to the router via switches. How do I give them internet connection? Currently I can see the wifi SSIDs, but when I connect it says 'connected, no internet'?

I have repeated these steps about 3 times. Reading the comments I know that they work so what could I be doing wrong? I factory reset the hAP account lite and followed everything step by step, but it won't connect to my wifi l. Please help

@odlanyerr6683

Жыл бұрын

If the repeater does not connect, it is possibly because the parameters that your main router uses are not the same as in the repeater, confirm that both have the same configuration and is supported. check the channels that are assigned (if you want for example from channel 1 to 11 in mikrotik you can see it by the frequency ie 2412-2462) , check the band used (in the video is 2.4Ghz, other routers can be in the 5ghz frequency.), as well as the security protocol for the password (in this video uses as authentication WAP2 PSK with AES cipher, but there are more current authentication techniques such as WAP3.)

This is probably the 5th video I've watched and everyone of them shows me the first step where I must reset the configuration, but once I do this the router goes haywire, the ip becomes abnormal and I can no longer log back onto it either on WinBox or through the IP I'd normally use.

@odlanyerr6683

Жыл бұрын

I'm sure you must have solved your problem by now, but I'm writing it down for the next person who sees it and maybe wonder how to solve this. In mikrotik what you said is normal, a reboot without the factory settings gives you a "blank" router without any apparent configuration, it has no ip assigned to the interfaces or ports that belong to a bridge, so the common way to enter the equipment in this case is for example in winbox go to the tab "neighbors" there you can see your mikrotik and enter it not through the ip but through the mac address. you can log in both ways with an ip but as it is not possible to do it you can do it with the mac address associated to the physical interface of the port. Regards.

@hablandojohn8857

Жыл бұрын

@@odlanyerr6683 You saved me dear friend! Many thanks from Greece!

Hello, Can you PLEASE make a video on how i can change my mikrotik RB951 router into a wireless adapter it doesnt have any internet i want to use it for kali linux's airgeddon, so please make a tutorial on it :).

Ap isn't obtaining an ip, any tips?

is this the same setup to Access Point? Like getting the IP address to your main mikrotik router to mikrotik repeater? 😬

@TKSJa

2 жыл бұрын

No, the other way around. This router get IP from your main AP.

Hey man thanx for all the help can you please help me and make a video or just explain to me how to Move specific ethernet ports to spesific wan ports. Please help

I would fix the band to 802.11n only not bgn.

Is it fine to use the same SSID on the virtual wifi interface?

@TKSJa

2 жыл бұрын

Yes, but you can change it if you want

@badburn

2 жыл бұрын

@@TKSJa i have a mAP lite and I want to make it a repeater. Is it possible?

@TKSJa

2 жыл бұрын

Yes

@badburn

2 жыл бұрын

@@TKSJa thank you. Much appreciated.

Are you still active in Jamaica? Product sales?

@TKSJa

2 жыл бұрын

Contact me using the email in my channel about page

how to connect to router with no config? - i downloaded winbox from microtik and login with default user, thank you! :)

Shuttle watching your videos in India Kashmir But not showing connected Showing searching Plz help me

All I wanted was to have an antenna with a built in router that can connect to public wifi. I bought this stupid Latvia antenna and what it wants me to do is setup the whole damn network settings myself? It’s like they want you to do a full network university degree to be able to use their stupid antenna. It’s going to go back for a refund. Very disappointed. Never buy these antennas.