GET YOUR MERCH HERE! teespring.com/stores/arc-one-army-apparel

It was a super complicated alignment, but you did it perfectly the first time. Well done! Your welding instructors should be proud!

You my friend are bad ass. You should be making every bit of 150 to 200k a year. This is a job for a fitter and a welder. You doing yourself is ridiculous but at least you have the skills. Hat off to you my friend. Keep doing your thing.

Just casually welding a root in pass with mig one handed. Some of you welders are on a whole different level man.

I’ve been a welder and welder/fitter since I was 20 years old. Just turned 35 and I must say you are very talented man. The sky is the limit for you.

I have worked at a Airproducts Chemical plant where your work is used extensively...... amazing video, great 👍 work. Thank you for sharing. 😎

some brilliant welding i wouldnt even know where to start with a job like that. I am glad most of my work is CNC controlled

Making it look easy as usual. Out standing work.

As a welding inspector I am very happy to see a welder with very good technical and practical knowledge. Your welds look really nice and to see such delicate fitting is beutiful. But what I like the most is that you use a mask that provide you with fresh, clean air and a vacuum to avoid the nasty fumes, always health first! (Remember to change filter) Do you know what application your spools are for? Is it for transport of saltwater between ballast tanks in ship or district heating/cooling piping? Love the video!

By watched and observe your professional work done , you gave me ideas and taught very much, proud of you - thank you very much.

Im applying for a job where i need to learn pipe welding and this made me understand a whole lot of how i would be working! Great stuff. Thanks for sharing!

ah im too old to learn this! 59, welding all my working life but no tickets/qualifications and looks like so much to learn to do this commercially! Good to see your skills

Absolutely spot on work dude!

Amazing work as always man! Impressed as heck.

Congrats on completing that piece, I could imagine your mind may not of been able to rest the whole time you were making that due to the complexity of it all.

My man's got some music rolling with it, now. Good stuff, chief.

Mate this man has some great skills. Fantastic work and video great work👍👍

No idea why I watched this but I really appreciate the work and content. Very clean and well explained

That are some very nice weld seams, you must be an humanised welding robot! Good job sir!

Absolutely loving your channel, its amazing watching you work and its taught me so much.. Many Thanks...

@ARCONEWELDING

3 жыл бұрын

Thanks 🙏🏽

Craftsman. One of the best types of people.

I think it would’ve taken me half a shift to wrap my head around the iso for this spool. Great job.

Well done Calvin. Top job as always mate !

You are an amazing welder I am in awe of your capabilities

love it, roll the world! always see the guys in the US position welding everything. Spools like this aren't easy!

@Migman2020

3 жыл бұрын

You know a welder is good when he can take advantage of the perks of a fronius welder like that lol

Just want to say a big Thankyou for making this 10” pipe for the new turbo on my ford mondeo 2.0 diesel. It fitted perfect😂

@ARCONEWELDING

3 жыл бұрын

The turbo lag would be mad 😅

Im at school learning to be welder. I just watched alot of your videos, very good quality and inspirational. I was welding pipes with tig and itll be okay have to try this kind of fabrication too Love to weld so far! Maybe half a year left of studies then off to work

@ARCONEWELDING

3 жыл бұрын

Goodluck man ✊🏽

Very nice. Good job. I learned from your videos to much. Thank you. 👍👍

Well done that is a wild arrangement..thanks for sharing.

This video is just badass, awesome fit, awesome video 🤘🏻

Thank you for not turning off the camera!

Nice work, I like how you turn your work with one hand and control your weld with the other.

@ARCONEWELDING

3 жыл бұрын

Thanks man 🙏🏽

Great Work!!! It will be good to know which segment/industry these pipe spools are supplied.

Looks really good.

Your work is really precise

Well done mate. Keep up the good work.

Hi there i love your fabrication methods and technics I my self weld rollout decks tubs for scissor lifts using fronius 270i welding aluminium tread plate

Kompliment, ein sehr guter Job gemacht !

@ARC-ONE WELDING I am a professional welder and I am DAMN impressed with your skill SIR Not much else to say but best welding video Ive seen in a long time Excellent job

@ARCONEWELDING

3 жыл бұрын

Thanks man! All im trying to do is entertain! And maybe teach a little but mostly entertain 😅

I,m not a welder but out of interest, why did you have to cut a hole for the threaded bar, why not just weld it direct to the pipe? Great video, really enjoyed it .

@ARCONEWELDING

3 жыл бұрын

Something will be connected to that which shares the same system

You are Amazing.....thank You for making this Video....Rock Star!!!!!

Good stuff mate.

Awesome work 🔥💯💥

As a welder its nice to see that im not the only one who has to problem solve your way through a project lol Im not a welder for a living but i do a fair bit in my work as well as personal projects and i once had to weld up a large mag drill stand over my work bench that is sitting in front of a wall.. So if you saw how i managed to do a downhill spray mig (ARC force was my best friend lol ) on the bits that needed welding that faced the wall directly you would of been in stiches my hair was burnt and my whole side of my body ached like fuck for ages after that as i never been so limited on my gun angle on a job like that lol But i admire how you are able to keep something like that all square while keeping within tolerance..

Bloody brilliant.

Profesjonalistą 👍

Nice job!!!

솔로제작의 달인 조공이 필요가없네 혼자다함 최고네요

Damn I would have loved to have been your apprentice , u have a spot on demeanour about u bruv

Good job mate

Nice job👍🏻

Fabrication skills 👌🏻

Wicked looking work youre doing there. I see you use lots of tacks and jigs with counterweights to spin the pipe so you can roll out the welds. Does that ever affect the inspection having tacks here and there on the outside of the pipe. I've seen on some pipe welding videos that they have to cut it out if there are any errant arc marks on the pipe. Just wondering, very nice work!

Fair play brother 👍

Very nice 👍👍

@nikob3742

3 жыл бұрын

bon boulot mon gars tu assure 👍👍👍💪

Well you have to have some challenging bits to make from time to time to push yourself to the limit 👍👍👍👍

How long did that take you? You're vids are great and very informative. Keep up the good work. Love to see other sides to the welding trade other than what i do

AMAZING!!!!!

Never get frustrated! That's the challenge you seek that makes you a better fabricator, the next time you have a similar set up you develop better short cuts! Keep'em guessin! I always say.

good job, how do you feel with the new mask g5-01 you can recommend me?

really nice! :)

Nice job

BADASS!!

Great job. What kind of shop time to complete something like this? The magic of editing removes the whole feel for length of time.

@ARCONEWELDING

3 жыл бұрын

It took about 3-4hrs to make and yeah thats the power of edditing

love the music also

grazie milee

Good Job 👍🙂

Im so jealous about your job, i could do it with smile on my face , every day till i will die :)

Damn! Your a bad man. No question.

Great video bro. Are you using Lincoln electric ultra core wire? Also known as dual shield. Let me know thanks

실력이 아주 미쳤어

May I suggest that for the final fit-up you draw on cement floor and use plumbed(for checking too). Great to see you welded the inside of the flange and then out, so many welder do the reverse and don't know it increases fails.

Weld On Calvin!

Nice work man. I'd hire you

Value value amazink

wow !

Very good

well done

Nice.

Great video,what gloves are you using ?look like tig gloves ?👍🏻

Cool 😘🔥

very high talent... right & left hand welding..

Сварщик от бога, молодец, в концовке хорошая музыка....

Don’t discredit your self.. You do excellent work Mate! Thank you for sharing 👍

You wor very good sir👍🤝 my from indonesia🇮🇩

the video is awesome and pretty good explanation can i see the drawings also in between every fitting that would be nice so that i can understand the orientation, elevation and measurement. thats ok if you can't show the drawing but if you can it will be better . Thank you for great videos.❤️

buen trabajo

Most definitely like and subscribe, it's nice to watch a welding channel not populated by yanks. I know there is different tests you can pass for all different positions, what did you have to pass to be doing what you do?

Exelente

Top job, what was it for?

Đẳng cấp quá.😃

Something occurred to me that ive never thought of.... how do you know how to weld the flanges? You would need to know the orientation of the corresponding flange, or is there a set thing like 1 hole always acts as a datum

@ARCONEWELDING

3 жыл бұрын

Yeah all flanges are 2hole top, so thats a rule everyone follows so when its time to install the pipe everything fits 90° to eachother

Mantap kawan

am back to school for welding and god damn this type of welding is the hardest.i tryed to weld an plate on an pipe all around its so frustrating because its so freaking hard to do it.

Hi, How do you weld the branch to the long pipe in order not to move with heat deformation?

Awsom work could you teach a person to weld like you

good

Самый лучший 👍👍👍👍👍👍👍👍👍

is the g5-01 worth buying ?? great job mate

awsome work! is it difficult to find the perfect counter when rolling out those offsets?

@yannickbigras2890

Жыл бұрын

counter weight**