I'm not a fan boy for any brand, but I do have to say that just like an m16 or m4 vs the AK 47...having owned all 3 and many knifes...there is a reason why the Ak is harder to jam and stop in most cases than the other...if your tolerances are to tight and there is no play, then you get gunked up and jammed up quicker

They’re my favorite OTFs because I love their aesthetics. I also love that they use Elmax and M390 instead of more everyday steels. I think they’re the top OTFs on the market just by an inch for that reason.

For me it’s all about the look. Every Microtech you showed looked better than any other knife you showed next to it. Microtech makes the prettiest OTF to me.

@herbertmasing

4 жыл бұрын

Spot on.

@donttrip4228

4 жыл бұрын

Nah looks is someone’s preference. I don’t like the look of the utx85 , and has all that shiny big hardware too showing .. LOVE the FDE phaeton and simplicity/classy look of it and therefore went with that instead. Just hope it proves to be reliable

@donaldcooper4330

4 жыл бұрын

And uses much better steel

@Airplanetyson

7 ай бұрын

Beauty is in the eye of the beholder

@davidsolis1128

13 күн бұрын

i agree . slim.

Thanks this was helpful, I am looking to buy my first OTF and this actually gives me good information showing the difference between the microtech and the benchmades

MICROTECH does put out more blade configurations and variations with their otf’s. Single edge, double edge, tanto, etc. They also use different blade finishes like satin, stonewashed, mirrored, blackout. They offer two-tone with or without full serrations or semi serrations on their blades. Imho the best serrations on the market. Microtech uses a variety a different colors for their aluminum handles and step it up for special editions to carbon fiber and customized anodized fittings/hardware. They also use more exotic steels and Damascus on their oft’s and give the user more options. None of the competitors offer such variety. Not to mention the various blade grinds and angles that are second to none. The detail on microtech otf blades are by far superior to all other production otf knives on the market to date.

I wish the Phaeton’s blade was as broad as the Microtech’s blade. The Phaeton’s blade looks a little too disproportionately slim/skinny compared to its handle.

Microtech is the "gold standard" of otf knives, probably because they popularized them, so every other otf gets compared to them. A few manufacturers are on par or better, some are worse, and everything gets more complicated when you throw pricing into the mix. I was looking at the phaeton, but for me it came down to the ultratech being available in m390, and also having wider blade stock. I also dislike the proprietary screws, they don't serve any useful purpose, especially if loctite was neglected during assembly. In the end, a well made knife is a well made knife, no matter what brand is on it.

Really like your ludt color! I just got a microtech Sigil and had to send it right in for warranty it was rubbing scales

First time seeing a vid of yours. Massive flex with those knives 😂

The only reason I like the Microtech more is due to the blade proportion look. But other than that, I completely agree with you on the Microtech argument! I still hold that Benchmade charges WAY too much.

@Tom_H327

6 жыл бұрын

AsianKy1e I can agree with this sentiment. Every time I consider getting a benchmade I remember the “dainty-ness” of the blade. And also, I really like that MT uses premium steels, whereas BM uses ordinary.

@cliphunter4800

4 жыл бұрын

I'm also in agreement I was shopping for a knife this last week and was between ultratech or a benchmade 3300 and went with the ultratech for $275 the benchmade was $350 at my local gun shop but benchmade owner or CEO is anti gun

So what do you think for EDC utx-85 or the ultratech? I use my knife quite a bit while working currently I cary the benchmade casbah.

Where did you get that knife I can't find one

What model is that brass colored benchmade

That's a great look at these knives. The only autos I've had before the UTX-85 were the Protech The Don, a couple small Protechs, and a Kershaw Launch. The Kershaw was as good IMO as the small Protechs, but the Protech Don wasn't working out due to the little "scabbard" things catching in my pocket. I like the look and design and quality of the Microtech, but the deployment is ridiculously stiff. If it gets easier to open and close that could make it a keeper, otherwise I dunno.

BM infidel is a smooth deployer, currently trying out MT ultratech/M390 . A bit stiffer but no prob and bits for the hardware is available.

Fit and finish the houge, benchmade and microtech are fairly similar. However where I personally feel that microtech is ahead of competition is in the choice of steel used in their blades, as well as the large amount of options available for each design. Simply steel superiority and variety in each model are what make them better for me.

Great Video, I’ve been saving to get a top-tier OTF and watching videos on the Phaeton and Mini Infidel for several days and I’ve pretty much ruled out the UTX 85. It’s so great you have a Hawk Mudd knife and think the Deadlock is amazing. Semper Fidelis

Thanx! Almost ordered online. I'll seek out a brick and mortar dealer and "hands on" a few before pushing thru.

I just ordered a utx 70, it was between that or an infidel, and the infidel was juuuust too much money. I know im going to get a good solid knife with benchmade, but that over 400, it was just too much.

@SneakyCaleb

4 жыл бұрын

They go for 250 on the fb groups

how long do you think those springs on otfs will hold up? Im more concern about longevity. About those rattles, ive read somewhere that its better for otfs to have that like how vertical play means more secure lock up on lockbacks.

Can't tell you how many times I've come so close to buying one of the Benchmade OTF's lol. They are probably equal in terms of quality when it comes to OTF's imo to MT. Absolutely LOVE the Ultratech's and UTX's for EDC though. The prop. hardware is a little annoying for sure -bird

@desnd3094

6 жыл бұрын

BirdShot IV it’s that price diff between benchmade and microtech. What 275$ for Ultratech and 400$ for infidel with lower quality steal. It’s hard to pull the trigger on benchmade. Way overpriced. Am I crazy ?

@ilikeknafs9563

6 жыл бұрын

@@desnd3094 No you aren't, microtech is such higher quality

@desnd3094

6 жыл бұрын

MARK BARRETT thanks, then you got the guardian OTF good performance not so much in the looks dept. I ben spinning my wheels trying to figure out What I want but I think it’s going to be microtech, OTF .

@mythowrose2742

4 жыл бұрын

Desn D your right about the steel d2 for over a hundred is insulting but the button on every Benchmade otf I’ve seen is easier to use

@themittymak

3 жыл бұрын

@@desnd3094 why does everyone say guardian OTF is good.. the one i tried, it was just as hard to actuate as the microtech..

Late comment, however I have had a LUDT in m390 and have heavily used it, hasn’t let me down. I’ve had multiple ultratechs and haven’t absolutely loved them. Just ordered a BM infidel in s30v hopefully I love it.

@SneakyCaleb

5 жыл бұрын

you found one in s30v?! where? I have to agree! LUDT is one of the best models microtech makes!

@alexmwk2802

5 жыл бұрын

I got an infidel in s30V also just picked it up 2 days ago. It was blade HQ exclusive

So I'm a huge Microtech fan. But I absolutely agree with you that it seems to me they're not unequivocally better than some of the other brands, for the reasons you mention. I'm actually really interested in an Infidel (maybe a Mini) after watching you use yours.

Dose anyone know if the bit that comes with the clone Microtechs fit the legit hardware?

Absolutely a Lifetime Warranty and I love my UTX70 and since 2014 it’s been sent and sent back 4 different times and it seems to keep having the failure to deploy issue. It being the bottom line 70 I would have thought after the 2nd or 3rd issue they would have just replaced it. I’m going to go rogue and open it myself and replace the spring and see if that fixes it. I actually love a Microtech Knife but Despise an Ego. Semper Fi. 3/6 .

@Daddy53751

5 ай бұрын

Did you ever get to the bottom of the issue?

@willtrax71

5 ай бұрын

@@Daddy53751 yes and it seemed to just be a small issues with the Carrier that the Blade rides on and I have an Ultratech now and it’s insanely hard to deploy but getting better and I will say Microtech Warranty Service now is Top Tier and i had a one week turnaround on an Ultratech spring replacement. They also offer an amazing Military Purchase Program with a huge discount.

The main reason I prefer microtech to the infidel is the microtech has a stronger lock in my experience and my infidel seemed to be more sensitive to getting too dirty to properly operate. I work in a sawmill though, it's not common for a knife to be exposed to the amount of dust, hydraulic oil and frigid temperatures they see in my pocket. I also beat on my work knives pretty bad. The microtech holds up really well to moderate use.

Microtechs are sexier than benchmades. Also I've seen the torture tests for microtechs but not for any other otf. The torture tests I think speak for themselves, but that is purely my opinion. I do wish they were a little cheaper.

Where do you trade knifes at ?

And probably 85% don't get own a microtech lol.

I think that there is slight variation in each one between benchmade and micro tech and from what I’ve heard generally microtechs have less play.

@SneakyCaleb

4 жыл бұрын

Maybe true

@butterflyeffect2411

4 жыл бұрын

Almost Smart i have owned both now and personally SIGNIFICANTLY prefer the microtech. i prefer the mt blade steel choices but that's personal preference, but the blade size was more useful on the microtech and it had no play. my benchmade rattled around and had a tiny super thin blade compared to the the size of the handle. neither misfired once though so props to both

@SneakyCaleb

4 жыл бұрын

@@butterflyeffect2411 all the models have different blades etc. Both are nice. And both have lemons from the factory.

What size is the hardware ?

Just picked up a utx85 t/e. Got it for a good price so I jumped but honestly I do feel the quality could be better for the money. I had a few failures to deploy which my have been from some pocket lint getting in the wrong place, blew it out and haven't had anymore problems. But the blade play does bug me a bit.

I agree, micro techs ARE generally overrated and over priced. However, that switch jiggle is merely due to design. There is a tiny spring underneath the switch that keeps it suspended. The benefit of this design is that it keeps dirt from your thumb from getting into the mechanism during actuation. You’ll notice there are no open slots under the trigger like there are in the Benchmades. Just FYI nice vid

@sally2395

5 жыл бұрын

Good to know!

@sally2395

5 жыл бұрын

Thank you !

@cirillo9334

4 жыл бұрын

Thanks for info. Still, as the switch is like the first tactile feel you have, it’s signals to me, sh*t quality. All other OTF’s I have are tighter than a drum, and never have dirt issues. But, what do I know? Not a super knife designer for sure. But will stick with my (perceived) higher build quality knives.

@BrothersCinco

4 жыл бұрын

I find any OTF over $400 to be extremely overpriced. At best an OTF is a really cool shank or letter opener. With that said I find manual side openers from microtech to be great knives. Just wish they made a lot more of them

How long do the springs normally last in these otf knives and can you change them out yourself when they do break?

@SneakyCaleb

6 жыл бұрын

GitcheG75 warranty on all these companies is good

@SneakyCaleb

6 жыл бұрын

But you probably could if you had too

Hey does the michrotech have blade play

I totally agree. I have 3 Microtech OTF knifes and for over 200 bucks a company should be able to fix a rattling deploy button with lots of slop. I wont buy anymore MT just for this reason alone. Not worth the money

@TaylorGreene-98

3 жыл бұрын

Its done intentionally if people looked into it. Its a design feature

@jaypolaski5378

3 жыл бұрын

Yeah I see people talking about the button play... It's designed with a spring inside underneath the button. That button play on your actuation button is by design.

@jaypolaski5378

3 жыл бұрын

Also nice tool pic

Do you have a cybertech for sale?

What website do you sell your used knives on?

I have a s30v infidel too, it's nicer than my ultratech but im not really afraid to beat on my microtech and honestly I go with microtech for my EDC 90% of the time just for that reason.

My thought on the pin hole screws, maybe try a pair of snap ring pliers? Might be just the right size to get in there and keep things snug although they probably won't be any good for torquing them down but sometimes it better then nothing... or you can always find some finishing nails cut them flat and mount them in something solid or soldered, braised, welded, tracked, glued, or what ever you think will hold strong enough for the job at hand? Just some rando thoughts... 🥃cheers🍻

I have an ultratech and a cypher. I like Microtech design except they are too hard to deploy and retract. Actually the cypher is easier. But they carry really well in the pocket and they are fun to play with. I also don’t like the fact that they want you to send it back to them for taking apart and cleaning.

For double action EDC I'd go Benchmade all day. However when I don't feel like carrying my side arm, I conceal carry a Halo VI. Id like to pick up one of those drop point Infidels. Super hard to find though.

I have both the UTX 85 and The Infidel mini and honestly I think they both perform equally. I cut alot of types and sizes of rope. As far as play in the blade thats normal for an OTF.

Got anything else for sale?

How long have you had that microtech? Does it come new with the wobbly switch and internals? I like microtech design and aesthetics over benchmade, but based on your video benchmade seems to be better built.

The button play is intentional... There is a hole and a spring underneath the button. So wiggling that button and complaining about the noise isn't "pointing out a defect", it's more like complaining about the intentional design of the button.

So with all this being said. What would you recommend: Benchmade phaeton or and ultra tech? Going to make a purchase soon on my first otf.. and can’t make my mind up. Going to be an edc. So it will be abused

@themittymak

6 жыл бұрын

I found the Phaeton at a local shop for $200, I couldn't pass it up. Plus it has s30v and the action isn't stupid stiff

Microtechs are always out of stock which adds to the allure. You want what you can’t have.

@michaelfrandsen5200

5 жыл бұрын

Now here is what I think is the most correct answer :) Microtech is NOT my favorite. Their name and the way they always are sold out(Not many seem to be made), but I fully believe it's like you say. We should like here, look for the knives side by side and there Microtech lose IMO :)

@jsin22366322

4 жыл бұрын

I think that serves as evidence of the contrary. Why buy something that everyone has? Not that alluring if you see every John, dick, and joe carrying a micro tech.

@goldengecko1944

4 жыл бұрын

Michael Frandsen And i DONT like Benchmade,they are good in the market for folding blade’s and AXIS but Microtech has never let me down and that’s not what i can say from Benchmade! They should stay away from OTF’s ! But hey thats just my opinion...... they tried and i respect that but if it wont deliver ....then stop trying to jump higher then you can! Give me a Microtech anny time of the day! And if you cant bring up the the force you need to deploye an UTX85 then sure stay away from a Combat Troodon or even a Scarab

The movement is supposed to stop internal damage.

You can use a pair of snap-ring pliers for the Tighe hardware.

I’ve purchased 3 Benchmade OTfs and have returned 2 of them. My last purchase was the Autocrat and it failed to fire like 20 percent of the time. I prefer the Microtech line. Maybe I just got lemons? I’ve reviewed a bunch of Microtechs on my channel but I gave up on BM OTFs.

Any for sale

Nice to see another video.. You have some great knives.. I bought that LE 10 anniversary BM Infedel..What's the deal with the chisel grind ? I've been trying to research it.. Somewhere it says that it makes the knife a better piercer or stays sharp longer...But, the blade is really thin... What do you do for maintenance/oiling ? I really appreciate your input.. I picked up an REI 940-1702 too..It's green G10 with purple back spacers.. I think I remember you like green.. But, the steel isn't upgraded (still S30V).. It's about $25 more then the 940-2 but I like the colors.. Thanks.....

@SneakyCaleb

6 жыл бұрын

I like the colors on that one alot very similar to the regular 940 which is my favorite! I don't oil my otfs if they have an issue I will send them to warranty work but none of my Benchmades/Microtechs have needed any help. The blade on the infidel is very thin but it's not perfectly chisel ground like the pegan. It's strong enough I think but yeah thats why I prefer the rare single edge one shown in this video because it's thicker and will be easier to sharpen!

@thomaslanders1162

6 жыл бұрын

Thanks for reply

I’ve always been a Benchmade man never buy anything else got my first microtech and both are the best in their own way although certain things that microtech does is more geared towards heavy use and abuse compared to edc plus for round about the same price the microtech usually use higher end steels for the same price as extremely outdated d2 and S30v I enjoy both and carry both brands but the microtech now find their way too my hand more so than the others

@AlmostSmart Are the buttons on your L-UDTs crunchy/gritty? Does it get better with time?

@SneakyCaleb

Жыл бұрын

Yeah they are slightly. It’s never bothered me though. They are my favorite Microtechs.

@lesgarten

Жыл бұрын

@@SneakyCaleb I've been working mine for a few days and it has gotten a little better, was wondering if it will go smooth? Awesome knife for sure, scary sharp.

I really just wish that benchmade would upgrade their damn steel!!!!! Make the drop point infidel again and do it in 20cv for goodness sakes.

That's a nice Hogue knives mat!

I like the points you made in the video. I agree.

I can’t really speak for benchmades otfs. But I’ve had a few axis locks fail on me and some terrible symmetry with blade grind lines on benchmades and if you ask me that’s out of line for what they charge. As far as micro tech, the only one I own and have ever handled is my utx 70. It’s tiny and I love it. I’ve seen some videos of people just beating the hell out of those utx 85s and while I don’t think that makes any sense, it is nice to know it will hold up to a degree of usage. Some guys have carried a micro tech otf for years without failure. Great video btw, I agree with you. I wish they would release a batch now and then with less expensive steel. Say 154 cm for example. I’d gladly pay 100 bucks for a 154 cm micro tech knife. But they probably wouldn’t even drop in price even if they did use a lesser steel.

I agree, my benchmade infidel button is tight to the frame opened & closed, the loose button my UTX-85 T/E 233-4TA drives me crazy.. but my Protechs are the best

as someone who also owns both an ultratech and a phaeton, the innards are complementary different

I’ve owned a bunch of 85s over the years and ultratechs. I like ultratechs way better than 85s. The little difference in size makes a big difference IMO.

The Benchmade phaeton and microtech ultratech are the same knife basically. The phaeton has the same exact internals as a microtech. I don't know if microtech straight-up manufactured the body themselves or license Benchmade to do it but they're the same

Ok I’m listening, he’s definitely qualified for an informed opinion

Nice job on your new 710

I think they are both quality knives. My experience has been that my utx-85’s deploy just a little easier than my infidel and mini infidel, however, they all are easy to deploy in my opinion.

Good deals. Got anymore otf' s for sale?

Honestly, I concur. Both companies make great knives, however most Microtech's OTF's are too stiff. I tried opening the Cypher with one hand to no avail, I had to use both hands. Great point about the traction. Most knives I will not buy if it's too smooth to hold onto with very few exceptions. Benchmade service and warranty is flawless. They care about doing the right thing for the consumer and honoring that committment. I don't know if Microtech can match that. Lastly, with Microtech, you're paying for the name. Benchmade has my vote.

@renjoh

4 жыл бұрын

quit being a pussy

Thank you! I bought my wife a MT utx-70... paid $220ish for it. My observations: 1) The edge was DULL 2) The Bohler M390 steel was extremely soft. As soon as I got one side sharpened, I’d flip it over and the bevel on the other side was gone. 3) Stiff action... too stiff 4)There was blade play right out of the box. This knife is not worth the money IMO and I’m thinking about sending it back. That’s something I never do, but I’m that unhappy with it. For the money, I was expecting a lot more than a fancy box, and a subpar knife. Should’ve bought her a Hogue.

@SneakyCaleb

2 жыл бұрын

Hogue knives are way better quality

@csarebel8657

2 жыл бұрын

@@SneakyCaleb that’s what I keep being told... by people who know. I’m convinced the hype and defense of MT, is nothing more than guys trying to convince themselves that their $500 troodon was money well spent, and they totally did not get ripped off.

YES, MINE IS A ULTRATECH, WAS A $295 RATTLING KNIFE. THAT LUDT AINT WORTH THE MONEY EITHER, I HAVE ONE. My video was titled microtech ultratech the $295 rattling knife.

just got me a marfione cypher od green today, and the sound at 3:28, when in my hand, it felt definite and with purpose. Then it hit me, this knife has a theatrical aspect to it. I could see me 'playing this knife' like an instrument with its loosened part in a scenario where I want to raise the tension, or create subtle awareness that 'hey, I've got a knife in my hand' or 'is he holding a knife, what is that sound?' or ... basically, the modern version of the good 'ol ('bad boy') switchblade/butterfly of the 80s

First off, I love the objective thinking. As a Microtech fanboy (a proud one, at that) I could never jump out and say that they’re “better” than any other company out there, although they’re my favorite. I know, it all comes down to preference and so many of us get caught up in trying to justify our purchases, but to say any one brand is the one to rule them all is a stretch. Now that I’ve added a whole lot of nothing to your comments, I have to go pick up a utx 85...

Just picked up a Normandy. Lifetime warranty so I figured I couldn't go wrong at 1/3 the cost. Haven't seen any torture test yet.

ive been playing video games all my life. so ive been training my thumbs all my life for the moment i get my ultratech lol

i just got the benchmade 4600, does yours rattle when the blade is retracted? mine sounds like the blade is rattling and the blade play when it is out is crazy bad.

@akui88

6 жыл бұрын

personally i like my microtechs more, i own a utx85 and an ultratech. i own several benchmades autos and OTFs. i think the microtechs just feel better in hand, well my hand...

@SneakyCaleb

6 жыл бұрын

Send your Benchmade in for warranty

@akui88

6 жыл бұрын

does your 4600 rattle when u hold it sideways and shake it up and down? i don't know, i got it off bladeHQ and i don't know if its exposed to be like that.

@akui88

6 жыл бұрын

i got it last week

@SneakyCaleb

6 жыл бұрын

akui88 I don't know I'll try it with mine when I get back home but I don't think so atleast not much. All otfs have to have a little movement though!

I love all my benchmades most but I dig my utx70

So like what’s the model of that blue protech push button I can’t seem to find it 🤔 great video

@salsalvio929

4 жыл бұрын

Bryan Mcintire I believe that’s a Microtech LUDT

For me microtechs just have a cool factor that i love more than benchmade but quality wise both are great. i guess it's a matter of personal preference. : )

the phaeton i owned was actually a ton easier to deploy.. it was a gem.. i sold it though.. i think the ludt is awesome, and i recently got the recon auto.. ots is my thing these days

I once owned an Infidel. When I got it, I was so excited. I tested it by stabbing it into 3" corrugated cardboard. The blade was pshed halfway into the handle and jammed stuck. I could not get it to work after that. I sent it back and got my money back. I am leary of ever buying another infidel again. I like the sytyle of the Infidel but don't think I would rely on it for anything.

I have an ultratech due today-if it has blade play like yours,I'm sending it back

What I think is... my Microtech is so stiff I can hardly operate it sometimes, their LUDT is much better than their OTF knives. I'd say Benchmade in a sec if you compared them, I never owned a Benchmade OTF, but have played with one owned by a friend. Nice stuff you got, keep telling the truth. You may save someone else from much frustration. Thanks AS

@secretbase7473

4 жыл бұрын

Send your microtech in they'll service it and smooth out the deployment take advantage of there services, you have a lifetime warranty.

@SneakyCaleb

Жыл бұрын

Agreed !!

Understand your point..the mine is because from the minute 3:24 you start to talk about why the people think that Microtech is better and you start to compare with other knives with twice of value. I will love to see te comparition betewen similar knifes just that. Thank for your video, nice knives that you have

where did you the cooper Benchmade?

@nickprater2785

4 жыл бұрын

Befriend a cop or someone in the military, and get it on Gov x

@michaelric3540

4 жыл бұрын

Just bought one online? Didn’t need to be govt worker

My first otf comes in the mail tomorrow, its a utx85. i like seeing good and bad reviews on it.

@SneakyCaleb

Жыл бұрын

It’s still a great blade

i love my utx 70 but i wish it didnt have so much blade play wich im super picky about, but that seems to come with the otf action design. i wish i could buy more autos but i live in soviet canada and they are prohibited :(

I have a UTX-85 and the Phaeton. IMO The Benchmade is a much better edc since it lacks the glass breaker. Absolutely love the jimping on the Benchmade too. I still think the microtech is a great blade but the benchmade is arguably better

親指のダメージを見ました。スライドは硬いですか？

Nice man! I want an otf so bad but they are so expensive. Love the infidel!

@DW94576

4 жыл бұрын

Get something like an AKC

@spurraticas

2 жыл бұрын

You just have to pull the trigger. OTF Knives are (in a sense) like children. People will wait untill they are further along in life (financially ready) than they should have, to have one. Then once they do they all say they should have done it sooner. Just do it and bam! One month of maximum frugality later you are back in the black. And now have an awesome 😎 baby 🍼 that you are super nervous to let folks hold 😉.

I got one the other week the Merlot one the 85 version and every 3 deploys it failed. So I got a hogue :(

I hate to admit it but I've been carrying and Ultratech clone for 2 years now and love it so much im considering buying the real deal.

You know, it’s the perception that Microtech is a better knife maker. They’ve done a better name brand marketing campaign. Much like Harley Davidson motorcycle company. Honda is way better product, but they didn’t do a good job selling the name in their bike market. Good video. I am in the market to get a Ultatech and I think you just changed my mind. I have to justify $300 on a Ulteatech. Thanks for the post. 👍

“I love you” 🤣👏🏼

thanks for the video!

Your 100% right my homie, nice vid

The price difference and the blade steel from microtech definitely should have been mentioned during this video. Microtech generally has much better steel for a lot better price.

@royrodgersmcfreely2858

4 жыл бұрын

Fucking amazing steel

I've had a couple Mts that were hard to fire, but the 85s are probably the easiest to fire, literally a little kid could do it

@jmcknight1113

5 жыл бұрын

I disagree . My child's mother couldn't and she's a 28 year old in shape woman who's 5 foot 9 ... Kinda embarrassing to spend 250 and say these things are the best then she can't even fire it.

1:52 ...OK, so this is in fact the first video I’ve seen of yours, and yes, I can confirm you do have knives.

I watched this several times before I bought my Mini Infidel and absolutely love my Mini Infidel but think I want to swap for a single edge design now lol. Maybe a Phaeton or Ultratech??? Shout

@SneakyCaleb

3 жыл бұрын

You'd love the phaeton!!

@willtrax71

3 жыл бұрын

@@SneakyCaleb I saved for a while to grab the Mini and live this thing but just not the dual edge which is a freaking razor now lol. I LTK a shout about swapping for an Ultratech or Phaeton maybe and he’s checking his hundreds of knives Lol.

12:50 failure to deploy?

@SneakyCaleb

4 жыл бұрын

Nope just feeling the detent