Quality video, I wasn't convinced I needed an aluminum overflow tank since I never had one fail (non MX-5 vehicles). You were the first video to say why it fails, kudos to you

@NINEPOINTFIVEPROJECTS

6 ай бұрын

Hi, thanks for watching and the comments. I am not sure about the other Mazdas (non MX-5 vehicles), but the problem with the MX-5 is that the plastic tank is under pressure just like the rest of the cooling system and is just not merely an overflow tank. On most cars the overflow tank is NOT under presure and there is no rick of them rupturing. I think you may have already but if not please consider Subscribing. I would really appreciate it. Either way thanks again.

@kriskaylor6679

6 ай бұрын

Definitely subbed

@NINEPOINTFIVEPROJECTS

6 ай бұрын

Thank you!

Your guide is the best one on KZread for this none of the others give such detailed explanations or show inside the tank. It's good to know the welds are solid inside and out. I followed along and installed a Moroso tank on my own NC today, thanks for making it easy.

@NINEPOINTFIVEPROJECTS

6 ай бұрын

Thanks for watching and the comments. Glad you liked it and it was helpful to you. I think you may have already but if not please consider Subscribing, liking and hitting the bell icon. I would really appreciate it. Thanks again!

Thank you for this video! The Miata community appreciates it very much! Please keep up the Miata content!

@NINEPOINTFIVEPROJECTS

6 ай бұрын

Thanks for watching and the comments. If you haven't done so already please consider Subscribing and hitting the like button. I'd really appreciate it.

Very helpful video for my own NC, thanks !

@NINEPOINTFIVEPROJECTS

9 ай бұрын

Hi, thanks for watching and the comments! Glad it might help you. I love the aluminum tank and it's an exact fit. You may have already but if not please consider Subscribing and hitting the like button. I really appreciate all my subscribers as I continue to try and grow my channel! Thanks again.

moroso also makes an aluminum power steering reservoir. i just installed it yesterday. great video!

@NINEPOINTFIVEPROJECTS

Жыл бұрын

Hey thanks for the info! I'll check into that! Thanks for watching and the comments. If you haven't done so already please consider subscribing and hitting the like button. Thanks Again!

I have a 2007 and its still good.

@NINEPOINTFIVEPROJECTS

Жыл бұрын

Hi, thanks for the watching and the comments. Mine still looked very good too but my car is super low miles. I think mine would have been good for a good bit longer but it was on my mind every time I drove the car. Either way if you haven’t done so already please consider subscribing. I really appreciated each and every sub I get as I try to grow my channel.

Now off to find an "over temperature alarm" solution... I may be able to sniff the voltage from the existing thermostat and feed that into a 5V ATTiny MCU with a buzzer alarm if it goes over threshold. I'll get the 5V from my touchscreen radio's USB port... I'll add this to the list of "how to improve a factory Miata", and send it to Mazda engineers along with "built in blind spot mirrors". Nothing worse than not having a "you're head gasket is about to blow / you are about to destroy your engine" alarm... So a literal hose rupture could cause a total engine loss.... awesome whip btw!

@NINEPOINTFIVEPROJECTS

Жыл бұрын

Hi Ollie, Thanks for watching and replying! Thats a very poor design for a car that is otherwise mostly perfect. Let me know IF and When you come up with the alarm as I would be interested in adding the mod to my car too. If you haven't done so already, please consider Subscribing. Each subscriber is very important to me as I attempt to grow my channel and I would certainly appreciate your subscription. Also, please like and hit the bell so that you will know when I post other videos. Thanks Again!

Mine failed at about 85,000km the first time I took it on track. I replaced it with one from eBay. Doesn't look as nice as yours and I'm sure it lacks baffles, but it has done the job. I think it was around $100USD. Oh, and don't trust those sight glasses! They stay full of fluid even if the level in the tank is lower!!! Mine does, anyway.

@NINEPOINTFIVEPROJECTS

11 ай бұрын

Thanks for watching and the comments. My plastic tank was still in pretty good shape but I was still worried it could break at anytime. Either way thanks again and if you haven't done so already please consider subscribing and hitting the like button. Be safe!

“All you have is a temperature gauge, not a light.” Wouldn’t that make it easier to notice the rising temps??

@NINEPOINTFIVEPROJECTS

10 ай бұрын

Hi, no all it has is a temp gauge and no overheating light. If the tank ruptures it can overheat very quickly. If you don't look at the gauge every few seconds it can happen before you know it. At least a light would be something unusual on the dash to get your attention. Either way thanks for watching and your comments. If you haven't done so already please consider subscribing and hitting the like button. Thank you?

@christucker9566

10 ай бұрын

@@NINEPOINTFIVEPROJECTS I see what you mean, I guess for me I just enjoy having gauges cause I watch them religiously. Lol

@thetruthserum2816

2 ай бұрын

@@NINEPOINTFIVEPROJECTS This reminds me that I need to get an Arduino or STM32, or digi-stamp board (or other microcontroller), and a voltage sensor to read the temperature probe's voltage. Then code; If temperature > 225 F , then alarm = on via a buzzer. Plus a 12v to 5v buck down converter to run the board whenever the car is on... Super nice whip, btw!

I see so many people going right to a metal tank vs the oem plastic. The downside I see is not being able to see the coolant level in the tank vs the translucent oem plastic tank. For example I open the hood of the car at every fill up and look around for leaks, fluid levels and things out of place. With a metal can I wouldn’t be able to do this as the gas station with a hot engine. Any thoughts on that?

@NINEPOINTFIVEPROJECTS

4 ай бұрын

Hi, thanks for watching and the comments. The Moroso tank has a sight glass on the right side. It easy to see if you are low on coolant or not. I just check my level the other day when the engine was cold, first through the sight glass and then I removed the cap to make sure the level in the sight glass was consistent with what was actually in the tank and it was. Either way I think you may have already but if not please do me a favor and Subscribe to my channel. I would really appreciate that. Have a great day.

ordering mine now ! , did you do that install for that aftermarket radio ! it looks great !

@NINEPOINTFIVEPROJECTS

Жыл бұрын

Hi Guillermo, thanks for watching and the comments. Yes, I installed that radio and I highly recommend that Atoto radio. It is awesome. Has wireless Android Auto and Apple car play!.. if you haven't done so already please consider subscribing. I'm pretty new on KZread and your subscription would mean a lot to me!!

Maybe I missed it, but how do you see how much coolant is in the tank ?

@NINEPOINTFIVEPROJECTS

2 ай бұрын

Hi thanks for watching and the comments. Yes, there is a sight glass on the driver side of the tank. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

was planning to change my talk, but just buy the OEM one or cheaper $100 one, mine is 60,000 miles 2015, What do you think?? OEM for $100 or pay $250 for Moroso ?

@NINEPOINTFIVEPROJECTS

5 ай бұрын

Hi, thanks for watching and the comments. First I just looked and the Moroso tanks appear to have increased in price. Secondly, I'm not familiar with the 2015 model and if it has the same issue. If it does I would say that if you plan to keep the car for a long time, I'd go with the Moroso as a permanent fix. If you're not planning on keeping the car for a significant time, you might go with the OEM...just keep an eye on it. Either way, if you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it!!

They are ok as long as there is no bad wealding

@NINEPOINTFIVEPROJECTS

9 ай бұрын

Hi, thanks for watching and the comments. The welds looked pretty good to me. Hopefully it won't fail.. by the way if you haven't done so already please consider Subscribing and hitting the like button. I'm trying to build my channel and I truly appreciate each and every subscriber. Thanks again!

where did u get it at I got the same car

@NINEPOINTFIVEPROJECTS

Жыл бұрын

IHi and thanks for watching and the comments! I bought it from the Moroso web site...they ain't cheap though. www.moroso.com/catalogsearch/result/?q=Miata+Tank Hey, if you haven't done so already, please consider Subscribing. I just an old man trying to do KZread and every sub means a lot to me. I would really appreciate it. Nice looking ride by the way.

Can u remove the tank without taken the fluid out

@NINEPOINTFIVEPROJECTS

5 ай бұрын

Hi thanks for watching and the comments. You will need to get most of it out. If you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate that!

would you sell me that miata?

@NINEPOINTFIVEPROJECTS

6 ай бұрын

Thanks for watching and the comments. I really like the car and really not interested in selling it. But thanks anyway.

It makes me sad that Mazda went from an AGM battery in the trunk to a flooded battery in the engine bay.

@NINEPOINTFIVEPROJECTS

6 ай бұрын

Hi, thanks for watching and the comments. I really don't know much about the advantages of where the battery is located. What are your thoughts on why the trunk location was better? If you haven't done so already, please do me a favor and Subscribe, Like and tap the bell icon. I would really appreciate it.

@BixbyConsequence

6 ай бұрын

@@NINEPOINTFIVEPROJECTS One of the fundamental design goals of the original Miata was a perfect 50-50 weight balance. They decided that moving the battery to the opposite corner from the driver helped achieve that goal. As a consequence, AGM battery tech was chosen, because nobody wants battery acid in their trunk. AGM in automotive applications was rare at the time. The Panasonic battery they ended up choosing was legendary. The smallest battery I'd ever seen but it started the car reliably for a full 9 years and nary a speck of corrosion. And of course not having the battery up front freed up space in the engine bay, which to me is always a virtue. And the small size allowed it to occupy a niche in the trunk which really didn't interfere with cargo.

replacing from oem to an unknown quality one do not worth it. Just buy the oem one when you can see that the mouth of the can starts cracking. It lasts for 15+ years

@NINEPOINTFIVEPROJECTS

6 ай бұрын

Hi. Thanks for watching and the comments. I feel reasonably confident that the Moroso Aluminum tank is much better than the OEM plastic tank. From what I have read there is no guarentee on how long the plastic tank will hold. 15 years could equate to any number of miles on the car. Mine had 8400 after 15, but many I'm sure could have 184,000? Once you put the Moroso tank in, there is no need to worry about it ever again. Either way I appreciate your feedback. If you haven't done so already, please consider Subscribing. I really would appreciate it.

That plastic one looked great. Probably would have lasted a few years. My 2013 Club had 38k miles and my tank was actually getting discolored. Best to be safe than sorry!

@NINEPOINTFIVEPROJECTS

Жыл бұрын

Hi Todd, thanks for the comments and watching the video. Yeah I know it did look good but I'm the type of guy that if I know something might break and I can fix it, I will. I got that car in September of 22 and it has a little over 8k miles. I've already driven it more since then then it had on it!! Either way thanks again and if you haven't done so already please consider subscribing and hitting the like button. Regards

It’s a beautiful car as of damn sure the first thing you see is that automatic and then any real car guy doesn’t want nothing to do with that crack

@NINEPOINTFIVEPROJECTS

9 ай бұрын

Hi, thanks for watching and the comments. I get what you're saying from a young man stand point, but for me, being older prefer the automatic. Either way I appreciate your feedback but would appreciate your subscription as I try to build my channel. Thanks!