Sir really you’re professional really the most beautiful welding I have seen

Soooooo Quality, strength, orderly, and conscious conscience. No commercial .... Thank you very much

I love a good complete time lapse. What a great job.

Mr Jim you're a gentleman and a scholar. Welding and fabricating,now that's another subject. You are what I would call a builder of masterpieces. Your shop and equipment are second to none . That table and clamps are aamazig. Kudos to your contribution to the people and surrounding businesses.Good Stuff!!

Another beautifully done project, thank you for sharing.

Such a clean and organized workshop. A sight to behold.!!

It's a tough job, but you're making it really easy.Great.👍👍👍

your workshop is amazing, perfect!

@eduardofonseca6689

3 жыл бұрын

⁰

Hey Jimbo, like the idea of creating a draft through the workshop to extract the fumes - little things like this can have postive effect on our health. Professional as always.

Good morning Jim Its amazing how one pair of hands can accomplice so much, It just goes to show how having the right tools and a property set up shop can make all the difference , Nice job . Thanks for sharing your time with us ..Pete M

@JimbosGarage

5 жыл бұрын

Thanks for watching Pete M, Jimbo!

Well done. 👌👌👌 Best wishes from a german metal worker and welder.

From one Jimbo to another, Your welds are a sight to behold mate👍🇦🇺

Nicely done, good to see you are getting ventilation from smoke

Great work sir. U did it alone without helper. Salute

I love that weld cart set up.

Great Job, I can't even begin to imagine the cost of this project, wow.

@rogerwatson5730

4 жыл бұрын

His approach technique and quality are second to none

Отличный вариант навеса, современно и гармонично. Браво.

Another great build Jimbo. Keep it going!

What an awesome build

You make it look so easy JG! Love this channel

Excellent job. Really nice setup in your garage.

You sir are a true Craftsman! Very nice work and shop....

I see a nice fume extractor in your future jimbo! Love the design and build but over here I’d need a full roof on that. Great build.

Im feeling jealous nice job Jimbo!!!!

awesome jim, really nice work there. I have done the same thing with having all my surfaces at the same height, I find its an absolute must for a garage based workshop and limited space. Surfaces and space have to be multi functional.

@JimbosGarage

5 жыл бұрын

Thanks for watching Peter, Jimbo!

Отличные магниты👍 и золотые руки у мастера 🤝

Amazing work! You are an inspiration! Thank you for sharing your work/art. This is art, right?

It turned out great!

That welding is art!

Parabéns ótimo trabalho 👍👏👏

beautiful welds, great work, thanks

Awesome, Jimbo!!

Fabulous job.

que buen trabajo, good job men!! felicitaciones

Beautiful workshop. We could eat off the floor. Great video.

Say hello to Brasil 🇧🇷 Good work absolutely fantastic!!!👏🏼👏🏼👏🏼

Excelente como siempre. Saludos desde Argentina!

i love your work ever think of making a a frame with a winch so you can roll it over your table and hoist it up im sure you have thought of that but i always come back to your channel because you sir are talented and seem to enjoy teaching

Hello Sir, surfing in KZread I stumbled into your videos, I had leave in the wonderful California USA 🇺🇸 for many years, I still hold my Contractors License, I had done welding work for many years and I must say that I TRULY LOVE your professionalism, your videos are very instructional and motivating, I truly LOVE your working table, I would love to have one like that!! Your shop is absolutely beautiful!!! Big kudos to you Sir. A huge hello all the way Form Argentina 🇦🇷 South America!!

I've seen a dozen of these videos and those Strong Hand Corner Magnets get a shout-out every time.

Beautiful welds! Artist.

Loved your work. Thank you

Absolutely love the design, I need this fashioned into a carport please!

Excellent job!

You're shop and equipment is awesome.

Wow..really nice..welds is so good..iloveit

that welding is magnificent!

I don't know how you did it, but I drew up this project in my CAD program. Based on dimension(s) shown, I either had to go with 17 row's of Lattice, or shorten the free space(s) at each end 0.375" in., and go with 18 row's of Lattice. Great looking project. Thanks for sharing.

Well that section size dictates that aint gonna fall down any time soon . Very enjoyable to watch love the little end magnets great idea ..really do like the split between the commentary as you do and after during the time lapse , some vids ive seen comment as they go regardless of background noise and it just dont work as yours does ..great video as always thanks

Wow jumbo, you're incredible.

SALUDOS JIMBO ERES UN GENIO BUENO UN DOCTORADO EN LA SOLDADURA, TE ADMIRO SALUDOS MUY PADRE PROYECTO ERES GRANDE JIMBO

Great job jimbo

Nice ,well done, that's professional job!

Truly professional.

Quality. Nice weld job.

That's a great job man

A lovely build Jim, those welds look so clean. Keep up the great work

Excellent!

Wonderful job

Wow beautiful work

Beautiful welds Mister👏🏽👏🏽👏🏽

Awesome work

Awesome work sir!

I like this one..very good and inspiring

That is beautiful 😍

Its'just a marvelous job! Good, sir

Looks good 🇺🇸

great video love the welding table

I wrap my pencils in neon pink tape. Otherwise I misplace them. I do the same to my most used bits, tape measure and remote controls in the workshop. Spray paint also works well.

@gordowg1wg145

5 жыл бұрын

Also helps stop them growing legs. I had some neon pink loadbinders/tie-down straps at one point because they were the only ones that didn't get 'borrowed' - some guys aren't as secure in their masculinity, I guess :-D

@robthewaywardwoodworker9956

5 жыл бұрын

@@gordowg1wg145 Same! I used to get the bright neon pink extension cords for my guys. You could leave those out on a job site for weeks! LOL

Out of ALL the welders I see here on KZread I've got to say Jimbo, your welds are ABSOLUTELY incredible brother!!! PERFECT!!! I know that comes with years of experience but you are a skilled craftsman my friend, GREAT JOB!! 👍👍 Jay.

@JimbosGarage

5 жыл бұрын

Thanks for watching Jay, Jimbo!

Wow, and I thought I over designed stuff! 1/4” wall on a 5x5 tube is impressive

@rogerwatson5730

4 жыл бұрын

I think the method used to support all of the other metal for the top. Add to that only two support legs . I think it's good for many years.

I see your videos for a long time your work is fantastic and a school for those who like !!! Too bad I don't live in the United States because I would like to learn from you ...

just a fantastic build jimbo looks stunning in place.....all the best ................dougie

@JimbosGarage

5 жыл бұрын

Thanks dougie, Jimbo!

It's All about the Fab table , Makes it so much easier.

Nice work Jimbo

Congratulations very great work !

Another awesome project...

@JimbosGarage

5 жыл бұрын

Thanks for watching Bob, Jimbo!

Turned out great. Nice job.

@JimbosGarage

5 жыл бұрын

Thanks Richard, Jimbo!

Great job

You make it easy for us to understand the whole project, that table area that you've got is a major help great footage....

When your doing big or technical angles draw it out on the floor to scale then you'll be able to find the cut length when the lines over lap and it works great as a temple / non fixed jig for repetitiveness in faster production situation.

Nice job jimbo

Love these videos!

Nice job 👍

Excellent 💯🎯

Thanks for sharing 👍🏼

Nice!

wow looks great

Usted merece mucho respeto ,, un hermoso trabajo u

Awesome work sir, , im looking to build a steel and redwood pergola but not sure if the certifier will allow a non pro to do this

У тебя очень классный канал👍 спасибо за видео, очень интересно смотреть.

@user-qt5sz7ju2p

4 жыл бұрын

Зачем это железное решето весом с чугунный мост? Нет защиты ни от солнца, ни от дождя. Пафосная херня!!!

Nice job Jimbo

Great video and commentary!

Ahhhhh the joys of working in that Southern California sunshine! Jimbo it is -9 degree. C here today with 80 -100 KPH winds and heavy snowfall. All the roads in our county and the surrounding area are closed and we were without power from 11 pm last night till 11 am this morning! Care to trade places for a bit? Lol nice build by the way as usual!

Grandfa your work is awsome

Awesome welds brother !

Nice work...

good job.. Your tool is prefect.. You have long experience

amanzing! big job!!! que taller hermoso que tenes bigote.. saludos desde argentina

I like your work & style 👍