You are correct for the A number, the 204 is the model number, it's also in the VIN ( WDD204.0xx.). Though a tip, the sticker is specifically made for that model, BUT don't trust every single part number on MB, a lot of them are cross platform, so the number after the A is not always specific to each model.

Mine failed today on my 2012 C250. After researching this online, it is apparently VERY common and quite honestly Mercedes should have a recall on this. I am surprised that there isnt a class action law suit for this. My car left me stranded today and is still sitting in a parking lot until I have it towed.

@rudolf_1074

5 ай бұрын

Same thing myself Just today Every single W204 will fail this esl at least once

@nickcalderone75

5 ай бұрын

@@rudolf_1074 I had to have it towed home. I then did the work myself which was indeed very involved. Pulled the entire driver side dash, underneath panels, steering wheel, airbag assembly and entire steering column. Removed the ESL and replaced with a bypass module. Reinstalled everything and has been working great. Total cost for part and programming: $220 Towing: $140 Time: 9 hours Mercedes wanted $2100 and would be a 3 month wait...

@scottbarnett6687

2 ай бұрын

My 2012 c 250 just done it. Like right now!

@johnlink1984

2 ай бұрын

My c250 did this one week ago

@marcoochoa1531

Ай бұрын

Been a week without my car has anybody figured out how to bypass this Mercedes is tryna charge way too much

Never ceases to amaze me just how much technology and computer softwares that are in modern cars these days.

Great channel. I appreciate that everything doesn't go perfect (just like in the real world). No need the edit out mistakes. That's one item that makes this channel great. 👍

Great video, Sherwood! And Mike is a great guy to deal with for sure.

This is great information! I've never done them this way with an emulator. I'll definitely be investing in this. MB is one of the most common vehicles I work on. Thanks Sherwood!

Nice work! Very informative. Also reminding me that I do not want a Mercedes 😂

Another great procedure, hood popped, take care of it, I dropped my 10mm socket into the intake, get it out NOW. SAVE your files now. BRO, if it's hot out pls keep some water with you, we older guys need to keep hydrated. Lucky for me I live up on a mountain top on a Tropical Island and it is never hot nor humid up here in Baguio City, Philippines, but will be moving to FLORIDA next year. OMG Thanks for showing us another way to do this job. In Japan all junk shop parts are cheap so I built hundreds of adaptor harnesses and BOBs myself, real time savers for sure.

Another awesome job guys and I love it.

Sounds good, Maybe it's time to buy that emulator and all the hardware, Thanks for posting another great video.

exselente trabajo master mui bueno

ESL I did one awhile back

I can remove the steering lock module and replace the motor inside of it. At customers request can zip Tie lock to side of column so no future lock outs and easy access to replace the burnt motor inside the steering lock. Motor costs 10$ on eBay and I can get the lock out in locked or unlocked position within 5minutes

Do you have any shop in Ocala Florida

How much is all of the equipment here in this video and what type of computer is that? Is it necessary to have that computer as well?

Great video Sherwood! I would have liked to have seen how you fixed the the first emulator after the programming got messed up. Were you just able to overwrite it or did you have to somehow wipe it first. I had this problem before and was told the emulator was garbage but I still have it because I didn't believe it. Thank you for your time and the braids do help in the heat, I do the same! 😄👍🏻

@theroyaltyautoservice

10 ай бұрын

I went to the bottom right button W204 Emulator and went through the 2 steps. I don't know if that cleared it or not but I think it did. As I watched what I did again on the video I think I clicked the wrong file completely on the first attempt to write the emulator. I definitely think it can be cleared and reused but can't say 100%. Thanks!!

@mikeburdi3464

10 ай бұрын

@@theroyaltyautoservice Thank you very much for your reply. I respect your story and early struggles getting into the business, it's very familiar to me. Thank you for the great content!

@jordysandino6577

4 ай бұрын

Great job sir I always learn from you . Quick question do you think the vvi tool will work with sprinter . Also I need the information for the uhs person ? Thanks again

In Australia with a w202 stuck ignition won’t unlock , wish u we’re here in Sydney

@youwebz

5 ай бұрын

How did you go? Did you call a car locksmith or a Merc dealer? I have electrical power when fob is inserted, but just won’t allow car to start. I am in North Sydney and about to go down this path.

Possible quick remedy to get you home. 1. Gain access to the lower column, the actual metal shaft 2 Put key in ignition. 3 move steering wheel left to right quickly, it will move slightly. 4 at the same time, tap the column hard, with something metal like a hammer. The steering lock will release at this time…maybe. It can get you home, or to a workshop. Not 100 per cent, but it works for some. You’re welcome.

@the_first_resort940

2 күн бұрын

The only way this would work is if you tape the steering lock because what happens is the brushes in the motor that actuates the lock burn out so it’s like old starters you tap it to get the brushes spinning

@HarryHewitt-lh8xx

Күн бұрын

@@the_first_resort940 I know what happens to the motors. The initial movement of the motor is lost, but once it gets a bit of assistance, knocking the column a few times, it will release. It will stay released, until you turn the ignition off. It’s enough for you to gain access to remove the whole assembly, or it will be enough to get you running. It works. Many people drive around for months until eventually they put their hands in their pocket..

Please provide contact information to buy test harness from Mike

Enjoy your weekend with all your family around you, Royalty Auto Service Outstanding tutorial video 👍 SHARP Royalty Auto Service From Nick Ayivor from London England UK 🇬🇧 ⏰️ 20:57pm

@nickayivor8432

10 ай бұрын

Bottle of water 💧 very good for your body Royalty Auto Service

@nickayivor8432

10 ай бұрын

Please make video drop testing Royalty Auto Service Please

My 2015 Jetta has this. Is there a VW version?

Do you have a link to be able to purchase this emulator?

Great video. I am an automotive locksmith and local to UHS. They are my last choice to buy from. They sell to any Chuck in a truck. Non licensed guys working out of their trunks. They also sell to their clients customers. One of my guys happened to be there picking up some Fobs and another locksmith purchased an ignition for his customer. My guy overheard the locksmith call his customer that he was on the way over with the part. The customer was elated that he already picked the part up from UHS and just needed the locksmith to install it. I only buy from them in an emergency situation. We also have thousands of dollars of bad aftermarket fobs we bought from them. Lesson learned. We only use OEM and OEM refurbs. We are friendly with most of the other busy local locksmiths and we all feel the same about them. We run 100-150 just automotive calls per week. Sorry for the rant but they are not good people to deal with.

@theroyaltyautoservice

9 ай бұрын

I had no idea. Just who I've always used. We aren't close to anything so I just buy online. Good to know. Someone else mentioned American Key Supply. Maybe I'll check them out.

@scotts4125

9 ай бұрын

@@theroyaltyautoservice Unless you are local to them you would have no way of knowing. Just imagine your parts suppliers selling to your customers at the same prices you pay. That's what they do.

@charles979

2 ай бұрын

Ok great where do you buy xhorse stuff if not uhs?

@scotts4125

2 ай бұрын

@@charles979 Locksmith Keyless is pretty good.

I have a c230K my key turns and unlock the steering but wont turn on car. Any advice?

I really would like to speak to you directly regarding this issue. My daughter’s car. The dealership had me to replace other things and now saying more when this is the issue she’s having. Please let me know how to reach you for your opinion

Hey so my 04 c230 the key is good but when i put into ignition there's no electronic sound locksmith came and saud the eis data was lost what can. I do

Question friend I put an emulator on my car for the esl Everything is good now except that the buttons in the steering wheels are not working The yellow plug doesn't have anything to be connected with now What can I do???

How could I get the harness

The Beavis clip was spot on!!

What s the payment for this job, 012 c250 benz

👍🏻👍🏻

Will the push start button work after doing this?

@theroyaltyautoservice

3 ай бұрын

Yes, everything functions normally with the push button stsrt.

may I ask how much a garage would charge to do this steering column job, The Mercedes dealer here wants $1500. Seems too high to me. The part is not that expensive.

@jeano7770

3 ай бұрын

Don't go to Mercedes-Benz to get it replaced! I'm having the same problem on my Mercedes-Benz GLK 350, and I have a tech in California that's going to send me an emulator to replace the steering wheel lock, which will cost me $265. I will have my mobile mechanic technician install it for $300, and I had contacted Mercedes-Benz, and they wanted $2000 for parts and labor.

how long-lasting & reliable are the emulators?

@elliottpeters2996

25 күн бұрын

No moving parts so a good one will outlast the car. I am in the UK and do four to six of these a month. Whole job from start to finish (including removing the failed esl) takes around two hours. I buy tge emulators direct from China .. $25 US per car.

Will the im608 do the same thing?

@theroyaltyautoservice

10 ай бұрын

It will but i think you have to have a blank key to get the key password. You dont have to program the key but need the blank one while obtaining password.

@elliottpeters2996

25 күн бұрын

No you don't. You can get the key password with one original working key.

Your working key is a BE key. I know that because it has the red triangle at the front. (Original keys don't have them). You could have read the password from the key instead of going through the procedure calculating it.

@FilipexLaU

2 ай бұрын

The red triangle is the panic button and original keys do come with it, at least on other models. Not sure about this vehicle model.

My esl is unlocked. I unplugged esl and am installing emulator and programmed to ignition switch and keys. Can i leave broken esl in place. If it is stuck in open?

@olayvar15

28 күн бұрын

I have the same situation. Is it safe to just leave the esl?

@elliottpeters2996

25 күн бұрын

Yes. It can't reset itself without power.

@olayvar15

16 күн бұрын

Install my imulator today and my car is working now butI could hear clicking when I turn the steering wheel. Should I be worried?

What about shipping to the uk .

Does anyone in Manitoba Canada perform this emulator programming? My lock is already removed

I tried this car started but wheel is still lock what else can I try

@olayvar15

16 күн бұрын

Remove the esl.

Quit buying from uhs hardware. American key supply is light-years better and not part of akg. Please please please don't buy from uhs or any other akg subsidiaries.

@scotts4125

9 ай бұрын

Wow just saw this after I posted my rant. I am local to them and I agree 100%. Never bought from American myself.

Or you can just replace the motor in the ESL module for £4 and need no laptop or software. I'm a C-DT for AMG Mercedes and done 100's of these. Takes 1 hour and £4 of parts.

@elliottpeters2996

25 күн бұрын

As long as the module hasn't failed.

@Spartan11S

25 күн бұрын

@@elliottpeters2996 pretty much never. It fails because people rebuild it incorrectly.

@the_first_resort940

2 күн бұрын

Yup benz tech here I replace motors for my outside customers aswell. Quite simple takes less than a hour

is xhorse brand who sell that tool chinese company , many years ago is on market.Also in europe you dont get MOT inspection without steering wheel locked.Insurance company wont be so happy to pay a steal issue with a car manipulated by antitheeft system emulated...

@elliottpeters2996

25 күн бұрын

It is not part of the MOT test in the UK.

I see you got Hexprog! i have also and I use it for ECU reprograming mainly!

Trying out braids?

@theroyaltyautoservice

10 ай бұрын

Keeps my hair out of my face and off my neck in the 100° heat.👍👍

Mercedes are ridiculously complex.