Mercedes Sprinter OM642 Crankcase Ventilation Cover A6420100131

Автокөліктер мен көлік құралдары

Replacing important part of crankcase ventilation system

Пікірлер: 26

  • @boo4matt
    @boo4matt2 жыл бұрын

    I have just gone through your sprinter videos, and I’m beginning to wish you lived in my town. Many thanks

  • @robinpengelly8202
    @robinpengelly82022 жыл бұрын

    I replaced that part on my OM642 about 4,000 miles ago. It did reduce the oil consumption significantly. Although on my version of the engine it uses a single unit with the valve and the seal together instead of separate parts like you have, the seal part is the same. My seal was also hardened and of a much larger diameter than the new one. It did not completely stop oil making it to the turbo as I still find it pooled in the turbo intake if I look but the motor no longer uses so much, so little that it isn't really noticeable now. Thank you for your videos!

  • @tedc7533

    @tedc7533

    6 ай бұрын

    After you did the replacement, how much oil consumption was/is happening? Thanks!

  • @GlennLaguna

    @GlennLaguna

    6 ай бұрын

    @robinpengelly8202 What year is yours? Did you have any issues getting it off? Also, did you use anti-seize on the metal bolts going into aluminum? The factory uses anti-seize and does the dealer mechanic. Something home shop mechanics don’t know to do.

  • @josef197015
    @josef197015Ай бұрын

    Un. Saludo, sus videos son muy explicativos.

  • @Me11oIngenuity
    @Me11oIngenuity2 жыл бұрын

    Mercedes, please bring back the OM602 and stop making junk. BMW is starting to look better and that's sad to even say. Thanks for the video!

  • @kjbkbro5171
    @kjbkbro51712 жыл бұрын

    Do you have any videos of 2011 GL450 airmatic issues.

  • @parasqiv
    @parasqiv Жыл бұрын

    So ? D u fix the oil consumption ?

  • @sprinterfix
    @sprinterfix Жыл бұрын

    I dont understand how that little rubber seal could contribute to a leak. also, could you try putting a vacuum cleaner on your old pvc to test if it closes with enough suction. trying to simulate a turbo charger spooling but not sure if vacuum is strong enough

  • @IanOberhotlzer
    @IanOberhotlzer Жыл бұрын

    Thank you for all your useful videos! this was very helpful

  • @DANBOY89GYM
    @DANBOY89GYM7 ай бұрын

    My nexy prokect. My 2011 does hav that back valve but no black PCV that connects to it.

  • @michaelkononchik1060
    @michaelkononchik1060 Жыл бұрын

    When you changed the part 6420100131 did it reduce your oil consumption

  • @oussaidelouazzani8407
    @oussaidelouazzani84076 ай бұрын

    Hey ! Does a bad PCV can affect the EGR valve ?

  • @monolitomonolito2191
    @monolitomonolito2191 Жыл бұрын

    And also where are you located??

  • @monolitomonolito2191
    @monolitomonolito2191 Жыл бұрын

    Thanks for the video about turbo conectar on my sprinter l have the same loosing power

  • @jf7921
    @jf7921 Жыл бұрын

    También es imprescindible cambiar la bomba de aceite del motor, con esas millas pierde presión y no lubrica bien el motor

  • @samkane6966
    @samkane6966 Жыл бұрын

    hello i have a 2008 jeep grand Cherokee with om642 engine has 11 mpg aveg that is very bad diesel milage and no check engine. i changed gas filter and air filter already. can you help please

  • @normangarcia8324
    @normangarcia83242 жыл бұрын

    I have the same Sprinter year and same problem. I’m wondering how your oil consumption is going for you now. Thank you

  • @tedc7533

    @tedc7533

    6 ай бұрын

    I'm wondering, too!

  • @vallenatos26
    @vallenatos263 ай бұрын

    What size bolt is on the separator?

  • @GlennLaguna
    @GlennLaguna6 ай бұрын

    5:19 you say “should be part of regular maintenance”. How often? Also are these metal bolts going into aluminum? Anti-Seize?

  • @ukaszjurys2475
    @ukaszjurys247510 ай бұрын

    I had to order that part from MB Uk , they said they do not hold stock of it and it have to be ordered from Germany. It means its not a parts that is bought frequently.Odd it should be repleced every 3 years ? Used to pay for that part ,genuine MB from the dealer circa 24 GBP , now this part is over 100 GBP...Dont get it how its poss that inflation is circa 7 % in UK and MB increase price over 400%

  • @tedc7533
    @tedc75336 ай бұрын

    Is that 10mm socket a "star" socket at kzread.info/dash/bejne/oH2bqKdyqceol8o.htmlfeature=shared&t=250? Also, now almost 2 years later, did you find that replacing those parts reduced the oil consumption? Thanks!

  • @GlennLaguna

    @GlennLaguna

    6 ай бұрын

    Search “External Torx or E-Torx”

  • @Leo-ks5es
    @Leo-ks5es2 жыл бұрын

    🤪 Promo_SM.

Келесі