MERCEDES M272 and M273: TIMING CHAIN REPLACEMENT part 1

Автокөліктер мен көлік құралдары

MERCEDES M272 and M273: TIMING CHAIN REPLACEMENT

Пікірлер: 91

  • @Ogh88
    @Ogh882 жыл бұрын

    8:03 "Now it gets tricky" Me: WTF

  • @rusty358
    @rusty3583 жыл бұрын

    Shifted intake sprockets may indicate a stretched chain, not necessarily a worn sprocket on the balance shaft. Replacing the chain and tensioner may fix it and reduce the wear on the balance shaft sprocket.

  • @oyetoroolalekan952
    @oyetoroolalekan9522 жыл бұрын

    wow good work

  • @ruhsatigoek1632
    @ruhsatigoek1632 Жыл бұрын

    Very good video Super

  • @markjones-vx3kp
    @markjones-vx3kp2 жыл бұрын

    Long live the M113 !!!

  • @khamtp42
    @khamtp425 жыл бұрын

    I love this video I work on my car No problem thank you

  • @jacksabbath7986

    @jacksabbath7986

    2 жыл бұрын

    You are a damn liar. I cannot find a mechanic who wants to do this job.

  • @DANNYN224
    @DANNYN224 Жыл бұрын

    Do you need to remove the engine to do the timing chain

  • @pierrehunter7477
    @pierrehunter74774 жыл бұрын

    How the engine inside the vehicule come out and be on a on a stand ??? It's a miraculous of the god MERCEDES with the Mercedes technician angels. Nobody speak they must remove the gear box , flush the LDR ( the water in the radiator) flush the motor oil and the gear oil , keep out the gear box with specials tools and so on. It's sure i will be afraid by the job. In my time changing a timing chain was a simple job and we can do that on ours cars drinking beer and joking. Now we need experts and special tools because of the lobbies of cars ( MERCEDES , BMW , VW , TOYOTA and others ). And you must pay first to have a have a beautiful car , second to be able to take the road and third to keep your license. And more pay for the hidden failures of your car because it's well know that it's a MERCEDES failure on the M272 motor. Thank MERCEDES

  • @holeshot1721

    @holeshot1721

    6 ай бұрын

    Im pist off. My r350 only got 133,200 miles on before timing chain strech. My intake manifold butterfly valve broke at 116k and the transmission control module took a dump at 100k miles im on my 3 hvac blower motor and tell me how when it snows they have the wipers go underneath the hood so you can not lift to clean so all the ice gets stuck down there! Mb is not smart they did not do real life testing

  • @nationalcitysycho

    @nationalcitysycho

    2 ай бұрын

    ​@hME AND U BOTH BROTHER. MY BENZ HAS 80K MILES. BOUGHT IT THINKING IT WAS A STEAL....YEAT A STEEL PIECE OF SHIToleshot1721

  • @beliefblinkyblinky1272
    @beliefblinkyblinky12722 жыл бұрын

    good of u people

  • @user-eo4ls4ls7g
    @user-eo4ls4ls7g2 жыл бұрын

    Двигатель от рабочего стола далеко находиться , пока туда -сюда ходит , половино рабочегодня , зря проходит )))

  • @speedracer4588
    @speedracer45883 жыл бұрын

    How much should this cost at a Mercedes qualified shop..I have one with 135,000 miles..I'm a Chevy V8 expert but I'm kinda lost on this job..thanks...

  • @D4LM4R
    @D4LM4R6 жыл бұрын

    Im doing this tomorrow on my s500... YEAH RIGHT!Now I get why you charge a million dollars for labor

  • @alanw5812
    @alanw58125 жыл бұрын

    Every 30000km service ,that why

  • @coolkatz9012
    @coolkatz90123 жыл бұрын

    Timing chain 4.0ltr ford Barra bullett proof Aussie made .

  • @shawna7813
    @shawna78132 жыл бұрын

    Is the timing chain on the driver or passenger side of an M272? Heard a rattle a few times on startup on the passenger side...

  • @nationalcitysycho

    @nationalcitysycho

    2 ай бұрын

    THATS UR CAMS

  • @nationalcitysycho

    @nationalcitysycho

    2 ай бұрын

    VVT

  • @SavedbyHim
    @SavedbyHim2 жыл бұрын

    Chains do not stretch. The pins and links wear and created the impression that the chain has stretched but it's the pivot points that have all worn by a tiny bit and cumulatively makes the chain appear longer.

  • @holeshot1721

    @holeshot1721

    6 ай бұрын

    So if you were to lay a new chain next to that stacked tolerance chain would you say it streched!😂 your correct my guy whatever world you live in were you felt necessary to explain that to us.

  • @felipecuadra1415
    @felipecuadra14158 жыл бұрын

    why didnt they just leave the sprocket on the intake cam ??

  • @jameslatimer1432

    @jameslatimer1432

    4 жыл бұрын

    Germans that why !!

  • @jacksabbath7986

    @jacksabbath7986

    2 жыл бұрын

    @@jameslatimer1432 ...We call them Nazi's in our house...as they will never change. The most pig-headed people in the world.

  • @spencermaiers8322
    @spencermaiers83223 жыл бұрын

    This guy looks like he's a lot of fun at parties.

  • @cowgaming6099

    @cowgaming6099

    Жыл бұрын

    Nah he’s to busy making bank at a Mercedes dealership

  • @merenboss6502
    @merenboss65023 жыл бұрын

    *W211* *#merenbos*

  • @stephencrowe5494
    @stephencrowe54948 жыл бұрын

    I think the cams come out so when you turn the engine over stops the valves hitting pistons

  • @D4LM4R

    @D4LM4R

    6 жыл бұрын

    Yes I think this engine is interfering, and when they set the timing before they took out the shaft is to have valves in closed position or at least away from pistons so they can rotate crank shaft safely

  • @richsackett3423
    @richsackett34236 жыл бұрын

    That was insane. Why can't you put in on from the front like EVERY OTHER ENGINE?

  • @splint3048

    @splint3048

    6 жыл бұрын

    It is on the front of the engine and a lot of engines have a very similar process for chain replacement.

  • @Usmanthemecano

    @Usmanthemecano

    6 жыл бұрын

    This is actually an easier way I think

  • @barrysimmons1884

    @barrysimmons1884

    6 жыл бұрын

    There are a few replies from people who are confusing a TIMING BELT with a TIMING CHAIN. Belts are external and easy to replace. Chains are lubricated by engine oil and so therefore are inside a timing chain cover making them internal.

  • @alanw5812

    @alanw5812

    5 жыл бұрын

    It's better than audi and golf,they put chain to front and rear,golf rear chain is run water pump,audi is put between two camshafts at the back.

  • @joshgray2024

    @joshgray2024

    4 жыл бұрын

    @@barrysimmons1884 bud honda used belts on timing..internal with internal waterpump and idler. Shit sucks sideways engine have to remove have the shit and mounts to do it.

  • @ranbymonkeys2384
    @ranbymonkeys2384 Жыл бұрын

    anybody know what the hell socket they are using at 4:40

  • @mehazabinkarim7444
    @mehazabinkarim74443 жыл бұрын

    *WHAT DO U DO IF IT FALLS INTO THE ENGINE SHAFT*

  • @philipplamenov8649

    @philipplamenov8649

    3 жыл бұрын

    disassemble the engine block :D

  • @Ogh88

    @Ogh88

    2 жыл бұрын

    Bend over

  • @AriVovp
    @AriVovp3 жыл бұрын

    what is that slapping noise at 7:52 ?

  • @JohnDoe-xb7ov

    @JohnDoe-xb7ov

    Жыл бұрын

    The chain is still stretched lmfaoooo 🤣🤣

  • @systemofadown158
    @systemofadown1588 жыл бұрын

    why are tye cams coming out?

  • @Victor-cs6pb

    @Victor-cs6pb

    5 жыл бұрын

    very bad oil

  • @sosscarz

    @sosscarz

    4 жыл бұрын

    So when they have to turn the engine the valves will be completely closed and won't hit the piston.

  • @peetjvdm
    @peetjvdm Жыл бұрын

    Hi My 2006 C230 V6 2.5 M272 is making a constant ticking noise once the engine revs anything above idle. While driving the sound goes away if I take my foot of the accelerator. It sounds like the noise is coming from the left cylinder top, somewhere in the front. Does someone have an idea what could be the issue?

  • @brarautorepairs

    @brarautorepairs

    Жыл бұрын

    It can be worn chain guides or bad valve lash adjusters.

  • @Zionslayer1
    @Zionslayer18 жыл бұрын

    What code did the ecu throw?

  • @danbiko2468

    @danbiko2468

    7 жыл бұрын

    Zionslayer1 p0016-p0017

  • @barrysimmons1884

    @barrysimmons1884

    6 жыл бұрын

    I know this is an older question but hopefully this reply will still be helpful to someone. The codes should be P0016 and P0017. Crank Angle and Camshaft Position Sensors. The PCM sees the pair lose sync and hangs a hard light.

  • @shckltnebay

    @shckltnebay

    6 жыл бұрын

    Indicating a worn balance shaft 99% of time

  • @diablocls55

    @diablocls55

    3 жыл бұрын

    Luckily my 2007 E550 is just barely outside the affected range of engines 😂

  • @dcomputers
    @dcomputers5 жыл бұрын

    expensive labor intensive

  • @lancelotlalla7561
    @lancelotlalla75613 жыл бұрын

    Mercedes-benz can't get it straight lol!!!

  • @AMDX1325
    @AMDX13258 жыл бұрын

    why is this car, that is so new, need timing chain replacement?

  • @shckltnebay

    @shckltnebay

    6 жыл бұрын

    PURE MB BULL SHIT BAD PARTS AND WILL NOT ADMIT TO IT

  • @barrysimmons1884

    @barrysimmons1884

    6 жыл бұрын

    Several possibilities. Low grade oil that doesn't cling to the chain well (Wal-Mart oil changes etc.) , Aggressive driving habits (our teenage kids LOL) etc. Actually Mercedes should be praised because their modern chains are designed to last the life of the engine or changed easily (BEFORE they break) by using the old chain to pull in the new chain via a master link. Making a good portion of this process unnecessary. If the chain hasn't broken you only need to tear down to the rocker covers. My chain lasted 252,000 miles.

  • @shckltnebay

    @shckltnebay

    6 жыл бұрын

    44700 miles and needed a new balance shaft 06 E350 owned since 22k please tell me why I had the issue?

  • @D4LM4R

    @D4LM4R

    6 жыл бұрын

    Usually chain should outlast the engine, but sometimes Murphy’s Law comes to play like an utter bad luck (defective product) along with bad habits of flooring it drag-racing anytime every time possible, bad oil oil filter or both, etc, makes timing chains fail. It happens but most timing chains last pretty long time

  • @D4LM4R

    @D4LM4R

    6 жыл бұрын

    Also timing chain and chain tensioners use the engine oil for lubrication and pressure if no oil in the engine it’s possible that the timing chain gets damaged

  • @gianfrancoa
    @gianfrancoa3 жыл бұрын

    M272 one of the worst Mercedes engines ever

  • @who8dapple

    @who8dapple

    3 жыл бұрын

    gianfranco, that's good to know! I was thinking of pulling the trigger on a gorgeous 2006 E350 4matic wagon (M272 - w/212,000k)...check engine light is on for the timing chain! Will probably cost more than what the car is worth! 🤣

  • @gianfrancoa

    @gianfrancoa

    3 жыл бұрын

    @@who8dapple they supposedly fixed all the issues for the 2007 year

  • @who8dapple

    @who8dapple

    3 жыл бұрын

    gianfrancoa, will consider a 2007 an option! TY

  • @gianfrancoa

    @gianfrancoa

    3 жыл бұрын

    @@who8dapple you have to look for the engine serial number. Engines ending on 468993 and higher, have the issues fixed.

  • @who8dapple

    @who8dapple

    3 жыл бұрын

    gianfrancoa, the seller states that the issue has not been fixed and with 212k, have decided not to invest anymore money into the vehicle.

  • @joshgray2024
    @joshgray20244 жыл бұрын

    How many monkeys does it take to do a timing chain on a mercedes? Oh and dont forget about that sketchy shaky hands trying to connect chain links. Lmao

Келесі