Awesome

nice to see more people go turbo!

Nice work pal 👏

@englundasjohannes

10 ай бұрын

Thanks!☺️

I have also a m111 project here in Seinäjoki.. But i have w201. Also tuned by Dynolab. I got 261hp and 432nm 1.4bar @ 5000rpm. Wastegate was too small and the boost started to go crazy.

@englundasjohannes

9 ай бұрын

Nice! Are you drifting with it?

@noonakki

9 ай бұрын

@@englundasjohannes not now, i have open diff and its also the small one so i have to figure out something before i can really try to do something with it. But i have couple of videos here if you are interested. Maybe someday some drifting if find big asd or something.. Right now its street car, i just got it registered and roadlegal.

what cams are those this is sick

@englundasjohannes

9 ай бұрын

Standard cams, just running very rich😁 "Sadly" runs like a standard engine nowadays😕

can i put a M111.975 2.3L kompressor from a w202 c230 into a w203 c200 2006 while keeping all car functions such as cruise control and esp turn off button?

@englundasjohannes

6 ай бұрын

It should be possible if all the other engine accessories are the same and same connectors and sensors.

@samurboi8007

3 ай бұрын

you would need to use the w203 wiring harness and w203 ecu, which would mean needing the entire siemens efi system (w203 fuel rail, injectors, maf sensor, throttle body, supercharger bypass valve) to replace the bosche ME on the w202. so youd need to find a way to use the stock ecu otherwise you cant get functions or automatic transmission working. i think a much easier option is using the m111 EVO 2.0 cylinder head from w203 and the 2.3 block (it works flawlessly people have done it) cause you get the size of the 2.3 and performance and strength of the EVO head

hello,im planning to turbo my m111 2.0 w203 mercedes do u think it can handle 300-350hp with stock block? thanks

@englundasjohannes

8 ай бұрын

Yes, the stock block will hold up just fine with that power. I've had no problem with my 2,3 with 320hp☺️

@jekabsronis8225

6 ай бұрын

2.3 turbo 350hp 500nm no problem for last two years

which ecu are you using

@englundasjohannes

11 ай бұрын

Original Mercedes ecu with ECU masters DET3 piggyback

Hi can you tell me what kind of piggy back ecu you are using.tks

@englundasjohannes

9 ай бұрын

Hi. Its the ecumaster DET3. But i ended up not using it and using a standalone instead.

@patrickyong7050

9 ай бұрын

@@englundasjohannes tks englundad. Do you know which ecu is good for gasoline direct injection. Curious which country are you in. I am in canada.

@englundasjohannes

9 ай бұрын

@@patrickyong7050 Well over here our local tuners seems prefer Maxxecu so i went with that. I'm from Finland🇫🇮

@patrickyong7050

9 ай бұрын

@@englundasjohannes hi englund nice to know you. We will keep touch. Maxecu is from new zealand. I think i will go with fueltech. I an not good in tuning stanalone ecu but mechanical so so. Take care n cheers

What intake manifold?

@englundasjohannes

10 ай бұрын

From older m111 with the intake that goes across the valve cover and then i modified it to this.

@Frankie_Freedom

10 ай бұрын

You cut it and rewelded it?

@englundasjohannes

10 ай бұрын

@@Frankie_Freedom Yes